# \[APP\]\[PRO\] VThermo

**URL:** <https://community.homey.app/t/app-pro-vthermo/36442>\
**Category:** Apps\
**Tags:** app\
**Created:** [October 24, 2020, 12:28pm UTC](https://community.homey.app/t/app-pro-vthermo/36442 "2020-10-24T12:28:56Z")\
**Posts on this page:** 1\
**Showing post:** 262

<div class="post-metadata">

**Author:** ![Rrrr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rrrr/32/629_2.png) [@Rrrr](https://community.homey.app/u/Rrrr)\
**Post date:** [May 21, 2023, 9:25am UTC](https://community.homey.app/t/app-pro-vthermo/36442/262 "2023-05-21T09:25:05Z")

</div>

@balmli

v.1.9.2 HP2019

Vthermo state does not change.

Issue 1. When moving the target temperature before or after the current temperature, the state is not updated. Settings follow below. I experience this for two Vthermos.

I have created a new Vthermo under v.1.9.2: State not changing  
I have created a new Vthermo under v.1.10.3: Does not pick up temperature from any sensor in the same zone.

Maybe the issue under 1 is related to issue 2 described below.

Issue 2: Average temperature is incorrect.  
a. When Vthermo in the same zone with two Hue sensors.  
b. When Vthermo in the same zone with two Hue sensors from the HA Commmunity app.  
Regarding using the Philips Hue motion sensor from the HA Community app. I have written about it [here](https://community.homey.app/t/app-pro-home-assistant-community-app/71477/550).

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/a/6a37137be5546ca1521b5aad24f5acda1c59c84a.png)

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/1/c1243c0be6c8eefed412ffbd6b6a8287e125bd6b.png)

---

_[View the full topic](https://community.homey.app/t/app-pro-vthermo/36442)._