# \[APP\]\[Pro\] Universal TUYA Zigbee Device App - test

**URL:** <https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352>\
**Category:** Apps\
**Tags:** app, zigbee\
**Created:** [July 25, 2025, 1:07am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352 "2025-07-25T01:07:08Z")\
**Posts on this page:** 20\
**Page:** 79

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [March 9, 2026, 8:59pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1624 "2026-03-09T20:59:52Z")

</div>

Owh oké i didn’t noticed yet, if he continues then he’s got a lot to catch up.  
But I hope you still keep doing it also because you did a lot of development and helped us a lot 😊👍🏻

Have a nice evening and thanks again.

Best regards Peter.

---

<div class="post-metadata">

**Author:** ![Chris\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/chris_m/32/81900_2.png) [@Chris\_M](https://community.homey.app/u/Chris_M)\
**Post date:** [March 10, 2026, 12:31pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1625 "2026-03-10T12:31:38Z")

</div>

Hi,

I just tried to add the 1-gang switch \_TZ3000\_22ugzkme (Prod-ID: TS0041) to Homey. Unfortunately, Homey only recognizes an unknown Zigbee device; the switch is not recognized by the app.

Is it possible to integrate support for this switch?

---

<div class="post-metadata">

**Author:** ![Haadeess](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/haadeess/32/166374_2.png) [@Haadeess](https://community.homey.app/u/Haadeess)\
**Post date:** [March 12, 2026, 6:56pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1626 "2026-03-12T18:56:49Z")

</div>

Hi Dylan, congratulations on the new job! I hope everything is going well and you’re enjoying your work and finding success. Attached is a smart plug with an energy meter. It’s recognized as a generic Zigbee device and can be switched on and off. Unfortunately, it doesn’t measure the current draw. Is it possible to add that functionality?

| \_TZ3000\_wzmuk9ai | |
| --- | --- |

| TS011F |
| --- |

> **Summary**
>
> “ids”: {  
> “modelId”: “TS011F”,  
> “manufacturerName”: “\_TZ3000\_wzmuk9ai”  
> },  
> “endpoints”: {  
> “ieeeAddress”: “70:b3:d5:2b:60:0f:dd:76”,  
> “networkAddress”: 51109,  
> “modelId”: “TS011F”,  
> “manufacturerName”: “\_TZ3000\_wzmuk9ai”,  
> “endpointDescriptors”: [  
> {  
> “status”: “SUCCESS”,  
> “nwkAddrOfInterest”: 51109,  
> “\_reserved”: 26,  
> “endpointId”: 1,  
> “applicationProfileId”: 260,  
> “applicationDeviceId”: 81,  
> “applicationDeviceVersion”: 0,  
> “\_reserved1”: 1,  
> “inputClusters”: [  
> 0,  
> 6,  
> 3,  
> 4,  
> 5,  
> 57345,  
> 2820,  
> 1794  
> ],  
> “outputClusters”: []  
> }  
> ],  
> “deviceType”: “router”,  
> “receiveWhenIdle”: true,  
> “swBuildId”: “500+TZSKT21AD101”,  
> “capabilities”: {  
> “alternatePANCoordinator”: false,  
> “deviceType”: true,  
> “powerSourceMains”: true,  
> “receiveWhenIdle”: true,  
> “security”: false,  
> “allocateAddress”: true  
> },  
> “extendedEndpointDescriptors”: {  
> “1”: {  
> “clusters”: {  
> “basic”: {  
> “attributes”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “onOff”: {  
> “attributes”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “identify”: {  
> “attributes”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “groups”: {  
> “attributes”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “scenes”: {  
> “attributes”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “electricalMeasurement”: {  
> “attributes”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “metering”: {  
> “attributes”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> }  
> },  
> “bindings”: {}  
> }  
> }  
> }

Thank you in advance.

---

<div class="post-metadata">

**Author:** ![H\_van\_Barneveld](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/h_van_barneveld/32/18371_2.png) [@H\_van\_Barneveld](https://community.homey.app/u/H_van_Barneveld)\
**Post date:** [March 13, 2026, 7:44am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1627 "2026-03-13T07:44:25Z")

</div>

is this what you need?  
I add a tank-a-level sensor as “other” device.

 ![Schermafbeelding 2026-03-13 084342](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/a/8a22e3864a2852e60b0d40aa24d69d2ad8c91b02.png)

device is from epptech tlc2206 is that enough information for you to add it?  
[Free shipping EPTTECH Smart TLC2326P Ultrasonic Real-time Alarm Tuya wifi Mobile APP Water Oil Fuel Disel Tank Level Monitor Sensor Indicator](https://www.eptsensors.com/products/free-shipping-epttech-smart-tlc2326p-ultrasonic-real-time-alarm-tuya-wifi-mobile-app-water-oil-fuel-disel-tank-level-monitor-sensor-indicator?spm=..collection_7b588001-319a-40d2-8ba2-2f57bf1d4f9f.collection_detail_1.4&spm_prev=..product_ae5e5a8d-37a7-483b-9be0-c60942a15c29.header_1.1)

---

<div class="post-metadata">

**Author:** ![H\_van\_Barneveld](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/h_van_barneveld/32/18371_2.png) [@H\_van\_Barneveld](https://community.homey.app/u/H_van_Barneveld)\
**Post date:** [March 13, 2026, 9:49am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1628 "2026-03-13T09:49:24Z")

</div>

Can you tell where to find this Information?  
Could it be:

Epptech tlc2206

Or do you need more?

---

<div class="post-metadata">

**Author:** ![Bjorn\_Snijders](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bjorn_snijders/32/34710_2.png) [@Bjorn\_Snijders](https://community.homey.app/u/Bjorn_Snijders)\
**Post date:** [March 13, 2026, 1:02pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1629 "2026-03-13T13:02:01Z")

</div>

Hi Dylan,

I am trying to connect the \__TZ3000_\_gwkzibhs (TS004F) smart knob with rotary function. Connection and recognition is going well, battery status is present, however none of the functions, pressing or rotation is registered by home and flows. When the buttons are ‘pressed’ in the athom device, I get the following error messages. Any idea what the issue could be? Tested the rotary function with a logic variable to update to brightness tag level, but it looks like also no internal software update of the variable value.

 ![IMG_3926](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/1/2158c16c6e1af1ec03aa7896dcc174861b4805f5.jpeg)

 ![IMG_3922](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/4/b4cd1170e27fa44e3b6223c08e64225dc2f8a72b.jpeg)

 ![IMG_3923](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/0/00bccd52a8198f985561b5e04ef446fd245d96ab.jpeg)

 ![IMG_3924](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/5/55146bfd2f316f3215177680a86a8071541d326d.jpeg)

 ![IMG_3925](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/5/75c73fa1473027d1442b0eb4ff6e83f4d851015e.jpeg)

---

<div class="post-metadata">

**Author:** ![Lasse\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lasse_k/32/149831_2.png) [@Lasse\_K](https://community.homey.app/u/Lasse_K)\
**Post date:** [March 13, 2026, 4:36pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1630 "2026-03-13T16:36:54Z")

</div>

Ver.5.11.113. Contact sensor still unknown Zigbee sensor. It did work in Ver.43.

---

<div class="post-metadata">

**Author:** ![Lasse\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lasse_k/32/149831_2.png) [@Lasse\_K](https://community.homey.app/u/Lasse_K)\
**Post date:** [March 14, 2026, 9:01am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1631 "2026-03-14T09:01:30Z")

</div>

Ver.5.11.115. Contact sensor not installing, unknown Zigbee sensor. . It did work in ver.43.

---

<div class="post-metadata">

**Author:** ![Lasse\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lasse_k/32/149831_2.png) [@Lasse\_K](https://community.homey.app/u/Lasse_K)\
**Post date:** [March 14, 2026, 9:30am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1632 "2026-03-14T09:30:23Z")

</div>

Bonjour,

The thing is since a long time it doesn’t install at all. It comes up as unknown Zigbee unit. If you check your version 43 it  
worked in that version except for reverse action, Since than it’s either been unknown or no-response if installed.  
Take care  
Lasse\_K

---

<div class="post-metadata">

**Author:** ![Jeff\_James](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeff_james/32/120954_2.png) [@Jeff\_James](https://community.homey.app/u/Jeff_James)\
**Post date:** [March 15, 2026, 5:49am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1633 "2026-03-15T05:49:01Z")

</div>

Hi Dylan,

I paired a contact sensor under your app and it all contected fine and gave the correct cards.

The problem is I cannot turn on the contact sensor. I do so in the settings but nothing happens.

Gemini suggests contacting you to include this particular device in your app.

Modelid DS01

Manufactor Zbeacon

Thanks in advance

Jeff

---

<div class="post-metadata">

**Author:** ![Lasse\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lasse_k/32/149831_2.png) [@Lasse\_K](https://community.homey.app/u/Lasse_K)\
**Post date:** [March 15, 2026, 8:38am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1634 "2026-03-15T08:38:05Z")

</div>

Ver.5.11.118. Contact sensor still unknown Zigbee.

---

<div class="post-metadata">

**Author:** ![Haadeess](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/haadeess/32/166374_2.png) [@Haadeess](https://community.homey.app/u/Haadeess)\
**Post date:** [March 15, 2026, 11:28am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1635 "2026-03-15T11:28:27Z")

</div>

5.11.118

No Soil Fertilizer Level

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [March 16, 2026, 12:20pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1637 "2026-03-16T12:20:24Z")

</div>

Hi Dylan Good afternoon,

The sensor \_TZE200\_pay2byax

I tried to repair it again and is added as Door/Window contact sensor with Luminance now 👍🏻

The only problem is that the open/close status is reversed. I tried to cover that in the advanced settings to set the Invert contact state to Yes but the the status doesn’t change anymore to open and stay’s close all the time.

And SOS button still no response on pressing the button last in history 2 months ago.

 ![1000025606](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/b/eb4a6aac642a1cee98071ce5ca8c2acf222d1050.jpeg)

Diagnostic code: cbb048b3-2558-4d62-9dab-7ab5513e25ca

Thanks again and best regards Peter.

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [March 17, 2026, 11:50am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1638 "2026-03-17T11:50:28Z")

</div>

Hi Dylan I hope you are okay because I hardly don’t see you here anymore 🙁 I hope you are to busy with your new job and not sick or so.

I’m on app version 5.11.118 and also tried to re-add my LCD Temperature Humidity sensor the \_TZE200\_vvmbj46n, it doesn’t connect anymore even not after resetting the device and restarting Homey.

 ![1000025603](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/a/da1fe3b5bbaa20299a2a43f19572d51cf51c34c7.jpeg)

But the strange thing is that after this try I can see it in tools developer

 ![1000025659](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/1/d131aedc1f73aa86a1764f41837353b2d2f82176.png)

Diagnostic code: 8944df4d-b863-48cd-8342-36bddb41b190

That’s all for now and still hope you are okay.

Thanks again and  
Best regards Peter.

---

<div class="post-metadata">

**Author:** ![Hartmut\_Dunker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hartmut_dunker/32/120716_2.png) [@Hartmut\_Dunker](https://community.homey.app/u/Hartmut_Dunker)\
**Post date:** [March 17, 2026, 3:46pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1639 "2026-03-17T15:46:29Z")

</div>

Hi Dylan,

since I havn’t heard for some time about my device, I gave it a new try. I recognized, that the dive has changes from switch\_4gang to wall\_switch\_4gang\_1way. I removed and repaired it and now there is only one virtual button which switches all four physical buttons together. On the other side only physical button #1 is recognized by Homey flow. Can you please have a look?

Here a new diag: `7646007a-d4de-47c0-9519-f28b1575de62`

Best regards, Hartmut

---

<div class="post-metadata">

**Author:** ![Simon\_Ojstersek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/simon_ojstersek/32/75199_2.png) [@Simon\_Ojstersek](https://community.homey.app/u/Simon_Ojstersek)\
**Post date:** [March 19, 2026, 3:33pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1640 "2026-03-19T15:33:21Z")

</div>

Hi.

I am trying to add Tuya Zigbee Scene switch with 4 buttons with no success. Can you please look at diagnostic code f3c3248f-5b5a-4916-924d-8c378b37251c

Thanks in advance and best regards, Simon

---

<div class="post-metadata">

**Author:** ![Ronald\_Bok](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronald_bok/32/16757_2.png) [@Ronald\_Bok](https://community.homey.app/u/Ronald_Bok)\
**Post date:** [March 19, 2026, 5:31pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1641 "2026-03-19T17:31:09Z")

</div>

i got the same problem with the Soil Moisture Sensor

Adding it to homey gives a error Can’t make connection. And it is not visable in homey after canceling it.

But in the developer tool i see the device if it is connected. i can even interview it with the following result.

“node”: **{**

“modelId”:

string"TS0601"

,

“manufacturerName”:

string"\_TZE284\_oitavov2"

,

“ieeeAddress”:

string"a4:c1:38:69:88:bb:7e:ea"

,

“networkAddress”:

int57956

,

“endpointDescriptors”:**[**

…

**]**,

_1 item_

“deviceType”:

string"enddevice"

,

“receiveWhenIdle”:

boolfalse

,

“capabilities”: **{**

“alternatePANCoordinator”:

boolfalse

,

“deviceType”:

boolfalse

,

“powerSourceMains”:

boolfalse

,

“receiveWhenIdle”:

boolfalse

,

“security”:

boolfalse

,

“allocateAddress”:

booltrue

**}** ,

_6 items_

“extendedEndpointDescriptors”: **{**

“1”: **{**

…

**}**

_2 items_

**}**

_1 item_

**}**

_9 items_

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [March 20, 2026, 1:56pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1642 "2026-03-20T13:56:04Z")

</div>

Those are already in the app: dlnraja (generic\_diy), test (diy\_custom\_zigbee), tuya (generic\_tuya/universal\_fallback), ZG-102Z (contact\_sensor). The correct driver depends on the productId (TS0001, TS0002, etc). Just remove and re-pair, make sure you pick the right device type.

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [March 20, 2026, 4:14pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1643 "2026-03-20T16:14:59Z")

</div>

Thanks Dylan and good luck with repairing and with your new job 👍🏻

Best regards Peter.

---

<div class="post-metadata">

**Author:** ![Haadeess](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/haadeess/32/166374_2.png) [@Haadeess](https://community.homey.app/u/Haadeess)\
**Post date:** [March 21, 2026, 8:43pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/1644 "2026-03-21T20:43:37Z")

</div>

Hi Dylan,

here another Soil moisture sensor that is regonized as a Standart Zigbee Device.

ZG-303Z

f56390e6-82f7-4839-be50-47bcea575c62

| |
| --- |
| |

> ****
>
> |   
> HOBEIAN |
> | --- |
> 
> “ids”: {  
> “modelId”: “ZG-303Z”,  
> “manufacturerName”: “HOBEIAN”  
> },  
> “endpoints”: {  
> “ieeeAddress”: “a4:c1:38:54:fd:fc:fc:9c”,  
> “networkAddress”: 28465,  
> “modelId”: “ZG-303Z”,  
> “manufacturerName”: “HOBEIAN”,  
> “endpointDescriptors”: [  
> {  
> “status”: “SUCCESS”,  
> “nwkAddrOfInterest”: 28465,  
> “\_reserved”: 22,  
> “endpointId”: 1,  
> “applicationProfileId”: 260,  
> “applicationDeviceId”: 770,  
> “applicationDeviceVersion”: 0,  
> “\_reserved1”: 1,  
> “inputClusters”: [  
> 0,  
> 3,  
> 61184,  
> 1026,  
> 1029,  
> 1  
> ],  
> “outputClusters”: [  
> 3  
> ]  
> }  
> ],  
> “deviceType”: “enddevice”,  
> “receiveWhenIdle”: false,  
> “swBuildId”: “0126082025”,  
> “capabilities”: {  
> “alternatePANCoordinator”: false,  
> “deviceType”: false,  
> “powerSourceMains”: false,  
> “receiveWhenIdle”: false,  
> “security”: false,  
> “allocateAddress”: true  
> },  
> “extendedEndpointDescriptors”: {  
> “1”: {  
> “clusters”: {  
> “basic”: {  
> “attributes”: [  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 0,  
> “dataTypeId”: 32,  
> “name”: “zclVersion”  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 1,  
> “dataTypeId”: 32,  
> “name”: “appVersion”  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 2,  
> “dataTypeId”: 32,  
> “name”: “stackVersion”  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 3,  
> “dataTypeId”: 32,  
> “name”: “hwVersion”  
> },  
> {  
> “acl”: [  
> “readable”,  
> “reportable”  
> ],  
> “id”: 4,  
> “dataTypeId”: 66,  
> “name”: “manufacturerName”,  
> “reportingConfiguration”: {  
> “status”: “NOT\_FOUND”,  
> “direction”: “reported”  
> }  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 5,  
> “dataTypeId”: 66,  
> “name”: “modelId”  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 7,  
> “dataTypeId”: 48,  
> “name”: “powerSource”  
> },  
> {  
> “acl”: [  
> “readable”,  
> “writable”  
> ],  
> “id”: 18,  
> “dataTypeId”: 16,  
> “name”: “deviceEnabled”  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 16384,  
> “dataTypeId”: 66,  
> “name”: “swBuildId”  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 65533,  
> “dataTypeId”: 33,  
> “name”: “clusterRevision”  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 6,  
> “dataTypeId”: 66,  
> “name”: “dateCode”  
> }  
> ],  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “identify”: {  
> “attributes”: [  
> {  
> “acl”: [  
> “readable”,  
> “writable”  
> ],  
> “id”: 0,  
> “dataTypeId”: 33,  
> “name”: “identifyTime”,  
> “value”: 0  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 65533,  
> “dataTypeId”: 33,  
> “name”: “clusterRevision”,  
> “value”: 1  
> }  
> ],  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “temperatureMeasurement”: {  
> “attributes”: [  
> {  
> “acl”: [  
> “readable”,  
> “reportable”  
> ],  
> “id”: 0,  
> “dataTypeId”: 41,  
> “name”: “measuredValue”,  
> “value”: 2610,  
> “reportingConfiguration”: {  
> “direction”: “reported”,  
> “attributeDataType”: 41,  
> “minInterval”: 5,  
> “maxInterval”: 3600,  
> “minChange”: 60,  
> “status”: “SUCCESS”  
> }  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 1,  
> “dataTypeId”: 41,  
> “name”: “minMeasuredValue”,  
> “value”: -32768  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 2,  
> “dataTypeId”: 41,  
> “name”: “maxMeasuredValue”,  
> “value”: -32768  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 3,  
> “dataTypeId”: 33  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 65533,  
> “dataTypeId”: 33,  
> “name”: “clusterRevision”,  
> “value”: 1  
> }  
> ],  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “relativeHumidity”: {  
> “attributes”: [  
> {  
> “acl”: [  
> “readable”,  
> “reportable”  
> ],  
> “id”: 0,  
> “dataTypeId”: 33,  
> “name”: “measuredValue”,  
> “value”: 0,  
> “reportingConfiguration”: {  
> “direction”: “reported”,  
> “attributeDataType”: 33,  
> “minInterval”: 5,  
> “maxInterval”: 3600,  
> “minChange”: 600,  
> “status”: “SUCCESS”  
> }  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 1,  
> “dataTypeId”: 33,  
> “name”: “minMeasuredValue”,  
> “value”: 32768  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 2,  
> “dataTypeId”: 33,  
> “name”: “maxMeasuredValue”,  
> “value”: 32768  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 3,  
> “dataTypeId”: 33,  
> “name”: “tolerance”,  
> “value”: 0  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 65533,  
> “dataTypeId”: 33,  
> “name”: “clusterRevision”,  
> “value”: 1  
> }  
> ],  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> },  
> “powerConfiguration”: {  
> “attributes”: [  
> {  
> “acl”: [  
> “readable”,  
> “reportable”  
> ],  
> “id”: 32,  
> “dataTypeId”: 32,  
> “name”: “batteryVoltage”,  
> “value”: 30,  
> “reportingConfiguration”: {  
> “direction”: “reported”,  
> “attributeDataType”: 32,  
> “minInterval”: 5,  
> “maxInterval”: 14400,  
> “minChange”: 1,  
> “status”: “SUCCESS”  
> }  
> },  
> {  
> “acl”: [  
> “readable”,  
> “reportable”  
> ],  
> “id”: 33,  
> “dataTypeId”: 32,  
> “name”: “batteryPercentageRemaining”,  
> “value”: 200,  
> “reportingConfiguration”: {  
> “direction”: “reported”,  
> “attributeDataType”: 32,  
> “minInterval”: 1800,  
> “maxInterval”: 7200,  
> “minChange”: 5,  
> “status”: “SUCCESS”  
> }  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 65533,  
> “dataTypeId”: 33,  
> “name”: “clusterRevision”,  
> “value”: 1  
> }  
> ],  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> }  
> },  
> “bindings”: {  
> “identify”: {  
> “attributes”: [  
> {  
> “acl”: [  
> “readable”,  
> “writable”  
> ],  
> “id”: 0,  
> “dataTypeId”: 33,  
> “name”: “identifyTime”,  
> “value”: 0  
> },  
> {  
> “acl”: [  
> “readable”  
> ],  
> “id”: 65533,  
> “dataTypeId”: 33,  
> “name”: “clusterRevision”,  
> “value”: 1  
> }  
> ],  
> “commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
> “commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
> }  
> }  
> }  
> }  
> }

| Thank you! |
| --- |

[Previous page](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352.md?page=78)

[Next page](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352.md?page=80)