# \[APP\]\[Pro\] Universal TUYA Zigbee Device App - test

**URL:** <https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352>\
**Category:** Apps\
**Tags:** app, zigbee\
**Created:** [July 25, 2025, 1:07am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352 "2025-07-25T01:07:08Z")\
**Posts on this page:** 20\
**Page:** 35

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 25, 2025, 9:06pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/684 "2025-12-25T21:06:03Z")

</div>

I will try another patch the HybridSensorBase.onNodeInit() do a lot of calculations thaht can timeout on the EndDevice battery who is on sleep mode just after pairing.

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 25, 2025, 9:11pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/685 "2025-12-25T21:11:04Z")

</div>

Hi Francesco,

I’ve published **v5.5.252** with a more aggressive fix for the ZG-204ZM!

**The problem** : The device initialization was doing too many operations (queries, cluster bindings, etc.) that timeout on a battery-powered EndDevice because it goes to sleep immediately after pairing.

**The fix** : Battery sensors like ZG-204ZM now use a “passive mode” initialization:

- No blocking operations during init
- Only sets up listeners to receive data
- Device is marked available immediately
- Data will update when the sensor reports (on motion detection)

**Please try again:**

1. Update the app to **v5.5.252**
2. **Remove** the ZG-204ZM from Homey completely
3. **Factory reset** the sensor (remove batteries → wait 10s → hold button while inserting batteries)
4. **Re-pair** the device
5. The device should now stay available!

Note: As a battery sensor, data will only update when motion is detected. The sensor sleeps between detections to save battery.

Let me know if this fixes the issue! Released right now.

---

<div class="post-metadata">

**Author:** ![Francesco\_Carrozzo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/francesco_carrozzo/32/123849_2.png) [@Francesco\_Carrozzo](https://community.homey.app/u/Francesco_Carrozzo)\
**Post date:** [December 25, 2025, 9:50pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/686 "2025-12-25T21:50:38Z")

</div>

Nope, same behaviour.

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 25, 2025, 10:02pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/687 "2025-12-25T22:02:41Z")

</div>

I don’t have any other ideas sorry

If some one else have ?

Please remove my app remove the device and pair it again without my app and do an interview and give the interview here

---

<div class="post-metadata">

**Author:** ![Cyril](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cyril/32/13111_2.png) [@Cyril](https://community.homey.app/u/Cyril)\
**Post date:** [December 25, 2025, 11:23pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/688 "2025-12-25T23:23:57Z")

</div>

Hi

The 4 scene button is now detected as “unknown ZigBee device”

Thanks for the regular updates !

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 25, 2025, 11:51pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/689 "2025-12-25T23:51:45Z")

</div>

Witch manufacturername and device interview

---

<div class="post-metadata">

**Author:** ![Ronny\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronny_m/32/149491_2.png) [@Ronny\_M](https://community.homey.app/u/Ronny_M)\
**Post date:** [December 26, 2025, 1:33am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/690 "2025-12-26T01:33:12Z")

</div>

Thanks for the good work with the Universal Tuya Zigbee app in Homey!

I have the sensor \_TZE204\_gkfbdvyx / TS0601 and the sensor \_TZE284\_iadro9bf / TS0601 bought from shop in Aliexpress.

Neither of them work as they should. Here is what they show:

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/6/66523c9d3558aec5c532dc16ebc7c0609c54d598.gif)

Nothing is working, do you need more info?

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 1:48am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/691 "2025-12-26T01:48:26Z")

</div>

diag repport and device interview please

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 1:51am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/692 "2025-12-26T01:51:48Z")

</div>

on your screen capture , isn’nt it the right value ??

---

<div class="post-metadata">

**Author:** ![Cyril](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cyril/32/13111_2.png) [@Cyril](https://community.homey.app/u/Cyril)\
**Post date:** [December 26, 2025, 9:24am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/693 "2025-12-26T09:24:07Z")

</div>

it’s the MOES 4 scene button :

> **[Zigbee Scene Switch|Best Wireless Control Light Switch Battery Powered](https://moeshouse.com/products/zigbee-wireless-scene-switch-battery-powered?variant=43700045283643)**
>
> The ZigBee Smart Battery Powered Light Switch is a versatile device offering multi-control functionality for managing lighting environments. With scene push button switches, users can easily customize their lighting. This modern technology ensures...

> “ids”: {
> 
> “modelId”: “TS0044”,
> 
> “manufacturerName”: “\_TZ3000\_zgyzgdua”
> 
> },
> 
> “endpoints”: {
> 
> “ieeeAddress”: “a4:c1:38:b7:1d:a0:94:53”,
> 
> “networkAddress”: 39252,
> 
> “modelId”: “TS0044”,
> 
> “manufacturerName”: “\_TZ3000\_zgyzgdua”,
> 
> “endpointDescriptors”: [
> 
> {
> 
> “status”: “SUCCESS”,
> 
> “nwkAddrOfInterest”: 39252,
> 
> “\_reserved”: 20,
> 
> “endpointId”: 1,
> 
> “applicationProfileId”: 260,
> 
> “applicationDeviceId”: 0,
> 
> “applicationDeviceVersion”: 0,
> 
> “\_reserved1”: 1,
> 
> “inputClusters”: [
> 
> 1,
> 
> 6,
> 
> 57344,
> 
> 0
> 
> ],
> 
> “outputClusters”: [
> 
> 25,
> 
> 10
> 
> ]
> 
> },
> 
> {
> 
> “status”: “SUCCESS”,
> 
> “nwkAddrOfInterest”: 39252,
> 
> “\_reserved”: 14,
> 
> “endpointId”: 2,
> 
> “applicationProfileId”: 260,
> 
> “applicationDeviceId”: 0,
> 
> “applicationDeviceVersion”: 0,
> 
> “\_reserved1”: 1,
> 
> “inputClusters”: [
> 
> 6,
> 
> 1,
> 
> 6
> 
> ],
> 
> “outputClusters”: []
> 
> },
> 
> {
> 
> “status”: “SUCCESS”,
> 
> “nwkAddrOfInterest”: 39252,
> 
> “\_reserved”: 14,
> 
> “endpointId”: 3,
> 
> “applicationProfileId”: 260,
> 
> “applicationDeviceId”: 0,
> 
> “applicationDeviceVersion”: 0,
> 
> “\_reserved1”: 1,
> 
> “inputClusters”: [
> 
> 6,
> 
> 1,
> 
> 6
> 
> ],
> 
> “outputClusters”: []
> 
> },
> 
> {
> 
> “status”: “SUCCESS”,
> 
> “nwkAddrOfInterest”: 39252,
> 
> “\_reserved”: 14,
> 
> “endpointId”: 4,
> 
> “applicationProfileId”: 260,
> 
> “applicationDeviceId”: 0,
> 
> “applicationDeviceVersion”: 0,
> 
> “\_reserved1”: 1,
> 
> “inputClusters”: [
> 
> 6,
> 
> 1,
> 
> 6
> 
> ],
> 
> “outputClusters”: []
> 
> }
> 
> ],
> 
> “deviceType”: “enddevice”,
> 
> “receiveWhenIdle”: false,
> 
> “capabilities”: {
> 
> “alternatePANCoordinator”: false,
> 
> “deviceType”: false,
> 
> “powerSourceMains”: false,
> 
> “receiveWhenIdle”: false,
> 
> “security”: false,
> 
> “allocateAddress”: true
> 
> },
> 
> “extendedEndpointDescriptors”: {
> 
> “1”: {
> 
> “clusters”: {
> 
> “powerConfiguration”: {},
> 
> “onOff”: {
> 
> “attributes”: [
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 0,
> 
> “name”: “onOff”,
> 
> “value”: false,
> 
> “reportingConfiguration”: {
> 
> “status”: “NOT\_FOUND”,
> 
> “direction”: “reported”
> 
> }
> 
> }
> 
> ]
> 
> },
> 
> “basic”: {
> 
> “attributes”: [
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 0,
> 
> “name”: “zclVersion”,
> 
> “value”: 3
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 1,
> 
> “name”: “appVersion”,
> 
> “value”: 68
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 2,
> 
> “name”: “stackVersion”,
> 
> “value”: 0
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 3,
> 
> “name”: “hwVersion”,
> 
> “value”: 1
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 4,
> 
> “name”: “manufacturerName”,
> 
> “value”: “\_TZ3000\_zgyzgdua”
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 5,
> 
> “name”: “modelId”,
> 
> “value”: “TS0044”
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 6,
> 
> “name”: “dateCode”,
> 
> “value”: “”
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 7,
> 
> “name”: “powerSource”,
> 
> “value”: “battery”
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “writable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 65502
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 65533,
> 
> “name”: “clusterRevision”,
> 
> “value”: 2
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 65534,
> 
> “name”: “attributeReportingStatus”,
> 
> “value”: “PENDING”
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 65506
> 
> },
> 
> {
> 
> “acl”: [
> 
> “readable”,
> 
> “reportable”
> 
> ],
> 
> “id”: 65507
> 
> }
> 
> ]
> 
> }
> 
> },
> 
> “bindings”: {
> 
> “ota”: {},
> 
> “time”: {}
> 
> }
> 
> },
> 
> “2”: {
> 
> “clusters”: {
> 
> “onOff”: {},
> 
> “powerConfiguration”: {}
> 
> },
> 
> “bindings”: {}
> 
> },
> 
> “3”: {
> 
> “clusters”: {
> 
> “onOff”: {},
> 
> “powerConfiguration”: {}
> 
> },
> 
> “bindings”: {}
> 
> },
> 
> “4”: {
> 
> “clusters”: {
> 
> “onOff”: {},
> 
> “powerConfiguration”: {}
> 
> },
> 
> “bindings”: {}
> 
> }
> 
> }
> 
> }

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 10:04am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/694 "2025-12-26T10:04:09Z")

</div>

wi be fixed on the next version. It’s will be avalable until 1 hour.

|#693|Cyril|MOES TS0044 \_TZ3000\_zgyzgdua|v5.5.256|

|#690|Ronny|\_TZE204\_gkfbdvyx + \_TZE284\_iadro9bf|v5.5.254-256|

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 10:08am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/695 "2025-12-26T10:08:49Z")

</div>

Hi Ronny,

Thanks for your report! I’ve added full support for both your sensors in the latest versions:

**v5.5.254-256** includes:

- `_TZE204_gkfbdvyx` → Uses **ZY\_M100\_WALL** profile
  - DP1 = presence state (0=none, 1=motion, 2=stationary)
  - DP3/4 = detection distance (÷100 for meters)
  - DP9 = target distance
  - DP101/102 = sensitivity settings

- `_TZE284_iadro9bf` → Uses **TZE284\_SERIES** profile
  - DP1 = presence state
  - DP9 = distance
  - DP104 = illuminance (lux)

**To fix your sensors:**

1. Update the app to **v5.5.256** (latest)
2. **Remove** both sensors from Homey
3. **Re-pair** them
4. Wait 1-2 minutes for first data to appear

The app now uses an **Intelligent DP Mapping System** that automatically detects your sensor type and applies the correct configuration.

Please let me know if it works after re-pairing!

---

<div class="post-metadata">

**Author:** ![Ronny\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronny_m/32/149491_2.png) [@Ronny\_M](https://community.homey.app/u/Ronny_M)\
**Post date:** [December 26, 2025, 12:09pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/696 "2025-12-26T12:09:20Z")

</div>

![1000011122](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/b/0b3cff3bb1a113aceff2cafcf35b5d016e8b894c.jpeg)

Thanks for the try, but still the same.

I have updated to latest version .256

Removed the sensors

Restarted app in Homey

Added sensors and waited 15 minutes.

Lux is way more than what it should be.

Temperatur should be around 24

The others dont work.

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 12:24pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/697 "2025-12-26T12:24:37Z")

</div>

Please do an diagnostic on the app seeting .

Best regard.

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 1:40pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/698 "2025-12-26T13:40:27Z")

</div>

on the next version ( to be released asap ) v5.5.257: FIXED \_TZE284\_iadro9bf ZY-M100-S\_2 DP mappings (Ronny #696) - DP104-112 range  
But i need your diag.

**v5.5.257** \_fixes your \_TZE284\_iadro9bf sensor!

**Root cause:** ZY-M100-S\_2 with TZE284 chip uses DP104-112 range, NOT DP1-9 like older models.

**Fixed mappings:**

- DP104 → Illuminance (lux)
- DP105 → Motion state (none/presence/motion)
- DP109 → Target distance
- DP112 → Occupancy boolean

**Note:** This sensor does NOT have temperature - only presence, distance, and illuminance.

**To fix:**

1. Update to **v5.5.257**
2. **Remove** the sensor
3. **Re-pair** the sensor
4. Wait 1-2 minutes for data

The app now correctly detects your sensor as **TZE284\_SERIES** profile with the correct DP104-112 range.

Please let me know if it works!

---

<div class="post-metadata">

**Author:** ![Cyril](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cyril/32/13111_2.png) [@Cyril](https://community.homey.app/u/Cyril)\
**Post date:** [December 26, 2025, 1:57pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/699 "2025-12-26T13:57:52Z")

</div>

The button is now recognized as “4 boutons contrôleur sans fil” 😁

but the physical buttons don’t work, and the battery isn’t updated.

 ![1000017859](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/b/4bff88691d4637dd34237d7b99bda4fc644aade2.jpeg)

The button work when i click it in the app (capture), but not when I click on the physical module

 ![1000017858](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/7/b7323102d2a47c46e54f4086cbb77b5986dd2b37.jpeg)

In the flows, there is too much “when” cards I think, like “bouton appuyé “ and “un bouton est appuyé” that seems to be the same

And I don’t understand the “contrôleur devient intérieur à x% “ etc… when cards

 ![1000017856](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/c/bca5cc5252bfe13697443338588673a07f570cd6.jpeg)

Thanks again !

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 2:12pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/700 "2025-12-26T14:12:07Z")

</div>

> [@Cyril](#):
>
> ontrôleur devient intérieur à x%

i think it’s about the battery percentage ; “ontrôleur devient intérieur à x%” do you have any diag log after pressing buttons ?

best regard

---

<div class="post-metadata">

**Author:** ![Cyril](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cyril/32/13111_2.png) [@Cyril](https://community.homey.app/u/Cyril)\
**Post date:** [December 26, 2025, 2:46pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/701 "2025-12-26T14:46:10Z")

</div>

Where can I find diag log ?

I have create a log in the app settings after pressing “1, 2, 3, 4, long 1”

The code returned is : 67ad34b7-6f78-4f61-9284-1555c4d2a224

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 2:49pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/702 "2025-12-26T14:49:43Z")

</div>

Hi Cyril,

**v5.5.260** fixes your 4-button controller issues:

**What was wrong:**

- The driver only had 1 endpoint, but TS0044 uses 4 endpoints (one per button)
- Battery listener was not properly configured

**Fixed:**

- ✅ Added all 4 endpoints with scenes/onOff clusters
- ✅ Battery reporting now works via powerConfiguration cluster
- ✅ Enhanced logging for easier troubleshooting

**To apply the fix:**

1. Update to **v5.5.260**
2. **Remove** your 4-button controller from Homey
3. **Re-pair** it (hold any button 5s until LED blinks rapidly)
4. Test each physical button

**About the flow cards:**

- “bouton appuyé” = generic card (works with any button + token)
- “un bouton est appuyé” = Homey’s built-in capability card
- Both are intentional for flexibility - use whichever you prefer!

Please let me know if it works after re-pairing!

---

<div class="post-metadata">

**Author:** ![dlnraja](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dlnraja/32/129224_2.png) [@dlnraja](https://community.homey.app/u/dlnraja)\
**Post date:** [December 26, 2025, 2:50pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/703 "2025-12-26T14:50:29Z")

</div>

okay i will check your diag log and do an patch

[Previous page](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352.md?page=34)

[Next page](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352.md?page=36)