# \[APP\]\[Pro\] Universal TUYA Zigbee Device App - test

**URL:** <https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352>\
**Category:** Apps\
**Tags:** app, zigbee\
**Created:** [July 25, 2025, 1:07am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352 "2025-07-25T01:07:08Z")\
**Posts on this page:** 20\
**Page:** 100

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 1, 2026, 10:55am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2059 "2026-06-01T10:55:49Z")

</div>

Hi Dylan Good afternoon, installed new version 8.1.60.  
Contact sensors okay, repairing existing SOS button no result. Adding Smartbutton and other SOS button still only been seen as Universal ZigBee device.

Diagnostic code: 703fb7df-35b6-478a-995e-5beb8fb6d901

 ![1000031883](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/3/83fcc59e56b50d23982719a0d3e9f6607e17837f.jpeg)  
 ![1000031884](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/5/859056cb8675ddf1d302ba37f6cbaadc6340b737.jpeg)  
 ![1000031882](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/6/f648a377b49a253e7323a8d65d55cd7775d796fe.jpeg)

Thanks again and good luck again, best regards Peter.

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 1, 2026, 2:00pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2060 "2026-06-01T14:00:44Z")

</div>

Version 8.1.63 no changes for me.

---

<div class="post-metadata">

**Author:** ![Mikko\_Vayrynen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mikko_vayrynen/32/56553_2.png) [@Mikko\_Vayrynen](https://community.homey.app/u/Mikko_Vayrynen)\
**Post date:** [June 1, 2026, 4:54pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2061 "2026-06-01T16:54:30Z")

</div>

And now APP works fine to me. Thank You!

---

<div class="post-metadata">

**Author:** ![Tobias-B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tobias-b/32/121365_2.png) [@Tobias-B](https://community.homey.app/u/Tobias-B)\
**Post date:** [June 1, 2026, 4:55pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2062 "2026-06-01T16:55:21Z")

</div>

Hi,  
I’m trying to integrate a SmarterCurry Solar Lux Sensor (Tuya fingerprint: \_TZE284\_aaeasoll / TS0601) with the Tuya Unified Zigbee app on my Homey Pro.  
After pairing, the device is recognized as a climate\_sensor instead of a brightness/lux sensor, and no lux values are displayed.  
I was pointed here by dlnraja via GitHub Issue #1379 (JohanBendz/com.tuya.zigbee), where he mentioned that _TZE284_ is logged for the next release but not yet fully implemented.  
I have created a diagnostic report — ID: [056e5755-7444-44a7-889f-7a7e95569c0b]  
Hope this helps to add proper support for this device. Happy to provide any additional information if needed.  
Thanks!

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 1, 2026, 9:46pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2063 "2026-06-01T21:46:52Z")

</div>

Hi Dylan, just tested version 8.1.68 no changes and I’ve seen that the Luminance of the Doo/Window sensors the Luminance is not lower than 1128 Lx while it’s fully dark outside see screenshot.

Diagnostic code 'ff555890-afce-4dee-8706-6ff993c40db2

 ![1000031899](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/d/9de22667a08d4968508d46e147679b7908413783.jpeg)

Good night and thanks for your hard work.  
Best regards Peter.

---

<div class="post-metadata">

**Author:** ![DomLAJO](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/domlajo/32/12535_2.png) [@DomLAJO](https://community.homey.app/u/DomLAJO)\
**Post date:** [June 2, 2026, 4:49pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2064 "2026-06-02T16:49:11Z")

</div>

Hi

I’m a bit confused …

Does every sensor have to be recognized by an app before integrating it in this app ?

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 3, 2026, 8:53am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2065 "2026-06-03T08:53:17Z")

</div>

Hi the device’s need to be registered into the app and after that you need to add every single device to your Homey.  
Registering can be done by interviewing the device from the tools.developer.homey.app/tools/zigbee page.

Best regards Peter.

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 3, 2026, 9:01am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2066 "2026-06-03T09:01:13Z")

</div>

Hi Dylan Good morning,

I’ve installed the latest version 8.1.75 of your app, the Luminance readings from the Door/Window sensors are still wrong the all staying at the same value even when it’s dark.  
Also the Smartbutton \_TZ3000\_mrpevh8p TS0041 and the SOS button \_TZ3000\_0dumfk2z TS0215A still been added as generic ZigBee device.

Diagnostic code: ea2c0a85-4cc3-40e2-8e71-166016b6ed9e

 ![1000031931](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/8/d811411215cbafaadedd99b9d0b6d93d38e5fe04.jpeg)  
 ![1000031932](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/e/ee51d3d16fa414920a9e1e3ec9d1746ddb14129a.jpeg)

Good luck and thanks again Peter.

---

<div class="post-metadata">

**Author:** ![DomLAJO](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/domlajo/32/12535_2.png) [@DomLAJO](https://community.homey.app/u/DomLAJO)\
**Post date:** [June 3, 2026, 5:10pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2067 "2026-06-03T17:10:28Z")

</div>

No other needed ? just this APP

In devtools I can see it but in unkwon Zigbee item

|   
Appareil Zigbee inconnu | a4:c1:38:8a:9c:51:ab:a0 | 14993 (3A91) | EndDevice | ? | x | eWeLink | SNZB-03 |
| --- | --- | --- | --- | --- | --- | --- | --- |
| | | | | | | | |

![image](https://us1.discourse-cdn.com/flex025/uploads/athom/optimized/3X/d/c/dcb97727305b4493f84297405843c0dfef2da509_2_690x21.png)

“ids”: {  
“modelId”: “SNZB-03”,  
“manufacturerName”: “eWeLink”  
},  
“endpoints”: {  
“endpointDescriptors”: [  
{  
“endpointId”: 1,  
“applicationProfileId”: 260,  
“applicationDeviceId”: 1026,  
“applicationDeviceVersion”: 0,  
“\_reserved1”: 0,  
“inputClusters”: [  
0,  
3,  
1,  
1280,  
32  
],  
“outputClusters”: [  
25  
]  
}  
],  
“endpoints”: {  
“1”: {  
“clusters”: {  
“basic”: {  
“attributes”: [  
{  
“acl”: [  
“readable”  
],  
“id”: 0,  
“name”: “zclVersion”,  
“value”: 3  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 1,  
“name”: “appVersion”,  
“value”: 113  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 2,  
“name”: “stackVersion”,  
“value”: 2  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 3,  
“name”: “hwVersion”,  
“value”: 0  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 4,  
“name”: “manufacturerName”,  
“value”: “eWeLink”  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 5,  
“name”: “modelId”,  
“value”: “SNZB-03”  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 7,  
“name”: “powerSource”,  
“value”: “battery”  
},  
{  
“acl”: [  
“readable”,  
“writable”  
],  
“id”: 18,  
“name”: “deviceEnabled”,  
“value”: true  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 16384,  
“name”: “swBuildId”,  
“value”: “0122052017”  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 65533,  
“name”: “clusterRevision”,  
“value”: 1  
}  
],  
“commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
“commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
},  
“identify”: {  
“attributes”: [  
{  
“acl”: [  
“readable”,  
“writable”  
],  
“id”: 0,  
“name”: “identifyTime”,  
“value”: 0  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 65533,  
“name”: “clusterRevision”,  
“value”: 1  
}  
],  
“commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
“commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
},  
“powerConfiguration”: {  
“attributes”: [  
{  
“acl”: [  
“readable”,  
“reportable”  
],  
“id”: 32,  
“name”: “batteryVoltage”,  
“value”: 24,  
“reportingConfiguration”: {  
“direction”: “reported”,  
“attributeDataType”: 32,  
“minInterval”: 0,  
“maxInterval”: 3600,  
“minChange”: 3,  
“status”: “SUCCESS”  
}  
},  
{  
“acl”: [  
“readable”,  
“reportable”  
],  
“id”: 33,  
“name”: “batteryPercentageRemaining”,  
“value”: 58,  
“reportingConfiguration”: {  
“direction”: “reported”,  
“attributeDataType”: 32,  
“minInterval”: 0,  
“maxInterval”: 3600,  
“minChange”: 6,  
“status”: “SUCCESS”  
}  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 65533,  
“name”: “clusterRevision”,  
“value”: 1  
}  
],  
“commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
“commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
},  
“iasZone”: {  
“attributes”: [  
{  
“acl”: [  
“readable”  
],  
“id”: 0,  
“name”: “zoneState”,  
“value”: “enrolled”  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 1,  
“name”: “zoneType”,  
“value”: “motionSensor”  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 2,  
“name”: “zoneStatus”,  
“value”: {  
“type”: “Buffer”,  
“data”: [  
1,  
0  
]  
}  
},  
{  
“acl”: [  
“readable”,  
“writable”  
],  
“id”: 16,  
“name”: “iasCIEAddress”,  
“value”: “00:12:4b:00:1b:44:e3:cc”  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 17,  
“name”: “zoneId”,  
“value”: 0  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 65533,  
“name”: “clusterRevision”,  
“value”: 1  
}  
],  
“commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
“commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
},  
“pollControl”: {  
“attributes”: [  
{  
“acl”: [  
“readable”,  
“writable”  
],  
“id”: 0,  
“name”: “checkInInterval”,  
“value”: 14400  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 1,  
“name”: “longPollInterval”,  
“value”: 14400  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 2,  
“name”: “shortPollInterval”,  
“value”: 1  
},  
{  
“acl”: [  
“readable”,  
“writable”  
],  
“id”: 3,  
“name”: “fastPollTimeout”,  
“value”: 40  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 4,  
“name”: “checkInIntervalMin”,  
“value”: 0  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 5,  
“name”: “longPollIntervalMin”,  
“value”: 0  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 6,  
“name”: “fastPollTimeoutMax”,  
“value”: 0  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 65533,  
“name”: “clusterRevision”,  
“value”: 1  
}  
],  
“commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
“commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
}  
},  
“bindings”: {  
“ota”: {  
“attributes”: [  
{  
“acl”: [  
“readable”  
],  
“id”: 0  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 1  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 2  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 3  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 4  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 5  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 6  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 7  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 8  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 9  
},  
{  
“acl”: [  
“readable”  
],  
“id”: 65533,  
“name”: “clusterRevision”,  
“value”: 1  
}  
],  
“commandsGenerated”: “UNSUP\_GENERAL\_COMMAND”,  
“commandsReceived”: “UNSUP\_GENERAL\_COMMAND”  
}  
}  
}  
}  
}

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 3, 2026, 9:12pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2068 "2026-06-03T21:12:36Z")

</div>

Hi Dylan Good evening, thanks for fixing the Luminance is okay now it decreased now it’s dark to 0 👍🏻  
The SOS button and the Smartbutton are added now as the right ones, Smartbutton was very difficult to add it took me about 10 time’s, no response and battery readings from both of them.

Diagnostic code: 330bb9b9-83f5-4c9e-952a-a4b5755decbe

 ![1000031961](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/0/60da97dc5f33c763f8277887ee71bebbaca1788a.jpeg)  
 ![1000031962](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/9/4965c2ae3ad08a07d735c6cea18ab76bb5cf72dd.jpeg)  
 ![1000031963](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/5/85f9cb7ca58dad2a3b32186f5c303c9c58343530.jpeg)  
 ![1000031964](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/9/39ca9f0b835a634b895c6b623a7e927bd4a566ca.jpeg)  
 ![1000031965](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/d/bd535e098aff6d0789b4adfc6da642b0db87838d.jpeg)

Thanks so far and good luck 🤞🏻  
Good night Peter.

---

<div class="post-metadata">

**Author:** ![JohnLundin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johnlundin/32/122288_2.png) [@JohnLundin](https://community.homey.app/u/JohnLundin)\
**Post date:** [June 4, 2026, 5:41am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2069 "2026-06-04T05:41:13Z")

</div>

Moes 2 gang dimmer, pairs okay but this comes up..

 ![IMG_2232](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/f/7f0d7bbfc42f44bcc6c855faa766ed10818a53bc.jpeg)

i see u update app the whole time, super good and hard work, hope you can fix my problem to​🥰

---

<div class="post-metadata">

**Author:** ![Daniel\_Larsson2](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniel_larsson2/32/16639_2.png) [@Daniel\_Larsson2](https://community.homey.app/u/Daniel_Larsson2)\
**Post date:** [June 5, 2026, 5:35am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2070 "2026-06-05T05:35:03Z")

</div>

Hi,

I’m trying to use a Zigbee soil moisture sensor with the Universal Tuya Zigbee app on Homey Pro.

**Device information**

- Manufacturer: `_TZE284_aao3yzhs`
- Model: `TS0601`
- Device type: Soil moisture sensor
- Homey Pro firmware: 7.4.2
- App: Universal Tuya Zigbee

**Issue**  
The device pairs successfully and appears to communicate correctly with Homey.

- Zigbee interview completes successfully.
- The device is online.
- RX and TX counters increase, indicating that data is being received.
- However, both temperature and soil moisture are displayed as **67109120** instead of valid values.

For example:

- Temperature: 67109120 °C
- Soil moisture: 67109120 %

This makes me think the device is sending data, but the datapoints may not be decoded correctly.

**Interview information**  
The device exposes the Tuya cluster **0xEF00 (61184)** and does not expose standard temperature or humidity clusters.

Relevant identifiers:

- Manufacturer: `_TZE284_aao3yzhs`
- Model: `TS0601`
- Input clusters: `4, 5, 61184, 0, 60672`

Could support for this specific TS0601 variant be missing, or does it require a different datapoint mapping?

I can provide the full interview dump if needed.

Thanks!

---

<div class="post-metadata">

**Author:** ![Tobias-B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tobias-b/32/121365_2.png) [@Tobias-B](https://community.homey.app/u/Tobias-B)\
**Post date:** [June 5, 2026, 6:28am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2071 "2026-06-05T06:28:57Z")

</div>

Hi Dylan,

First I want to say thank you for implementing the smartercurry luminace / brightness Sensor.

I updated the device, installed it again, it is correctly recognized as light sensor, but currently is Not showing Information about Lux Data.

This is the Diagnose Code b00b28a3-1470-4c2b-8f1e-0d8b6d167e7d

Thank you so much for your dedication

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 5, 2026, 10:44am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2072 "2026-06-05T10:44:48Z")

</div>

Hi Dylan Good afternoon, I’m on version 8.1.106 now but not working well either.  
Luminance is not updating anymore, SOS button not reparable or re-adding doesn’t find device anymore and Smartbutton no data or battery readings.

Diagnostic code: 754a12da-9e6a-4385-aad8-4a75ccef76f4

 ![1000032123](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/a/babd365648797a9d700ed60b54da88ac3e1574cf.jpeg)  
 ![1000032124](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/f/cf675cd7456edfa53930b948920e90e993f0bb95.jpeg)  
 ![1000032127](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/6/2641d45fe77120f408081401c32cf29e17ab2558.jpeg)  
 ![1000032128](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/9/69f28509935fcb7ca5504f497ec06f444feaf7b3.jpeg)  
 ![1000032129](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/e/9e798074a11b43599919111e52c3718ba86a6fdb.jpeg)  
 ![1000032130](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/e/aebd45bfb4ed9176bab8cda32c40a6b5a9fcabdc.jpeg)

Thanks and good luck with debugging grtz Peter.

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 5, 2026, 2:59pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2073 "2026-06-05T14:59:45Z")

</div>

Version 8.1.115 Luminance changing again, SOS and Smartbutton no changes.

Diagnostic code: 56345958-2af6-4955-afee-ccad90b52fbd

Good luck 🤞🏻

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 5, 2026, 9:19pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2074 "2026-06-05T21:19:46Z")

</div>

Luminance not going lower than 455 Lx

 ![1000032133](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/5/0580622c6da4b42b628e3cabef6f906cdd0b9694.jpeg)

---

<div class="post-metadata">

**Author:** ![Tobias-B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tobias-b/32/121365_2.png) [@Tobias-B](https://community.homey.app/u/Tobias-B)\
**Post date:** [June 6, 2026, 6:55am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2075 "2026-06-06T06:55:48Z")

</div>

Don’t know of you working on it currently, but to ensure up to date Information, the SmarterCurry Luminance Sensor is not receiving brightness data. Version 8.1.124

0ed123ea-9195-4a38-b961-ee42328d7611

Have a nice Saturday

Edit:

Updating with Version 8.1.133

e81acce5-e0f0-440f-8a17-f3cd5470fdb4

Edit:

Update regarding the SmarterCurry Luminance Sensor (\_TZE284\_aaeasoll / TS0601):

I did some research and found that the correct Tuya datapoint mapping for this device has already been implemented in the zigbee-herdsman-converters project:

-\> PR #12347: [Support SMARTERCURRY TZE284\_aaeasoll illuminance sensor by AloneHUANG · Pull Request #12347 · Koenkk/zigbee-herdsman-converters · GitHub](https://github.com/Koenkk/zigbee-herdsman-converters/pull/12347)  
 → Merged and released in v26.59.1 (May 29, 2025)

According to the PR, the relevant datapoints are:

- DP 2 → Illuminance (Lux), raw value
- DP for battery and configurable report interval also included

The Zigbee node data for my device confirms the same cluster setup (input cluster 0xEF00 / 61184), which matches the PR description.

Hoping this helps to implement the correct DP mapping on the Homey side as well. Happy to provide additional diagnostic data if needed.

Diagnostic code (v8.1.133): e81acce5-e0f0-440f-8a17-f3cd5470fdb4

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 6, 2026, 5:49pm UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2076 "2026-06-06T17:49:37Z")

</div>

Hi Dylan Good evening, I’m on Version 8,1,147 now and still no Luminance changing even not after a repair, also no changes for SOS and Smartbutton.

Diagnostics: 8bbdbad4-f0b4-4eb4-96e8-429a7c8b97a6

 ![1000032182](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/8/98341fd234f4a3279fe7e763257431fbba8051f8.jpeg)

Have a nice evening and good luck regards Peter.

---

<div class="post-metadata">

**Author:** ![dzsandzsee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dzsandzsee/32/120755_2.png) [@dzsandzsee](https://community.homey.app/u/dzsandzsee)\
**Post date:** [June 7, 2026, 6:56am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2077 "2026-06-07T06:56:49Z")

</div>

Hi, my presence sensor has stopped working, i tried to delete and add again but still nothing.

Diag report:

 ![IMG_4806](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/8/f85b62c5285bf5bdbaa01708b72a408d2d535f59.jpeg)

950ea50e-07f1-4c97-a46d-86a8baa6b3e7

---

<div class="post-metadata">

**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\
**Post date:** [June 7, 2026, 10:14am UTC](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352/2078 "2026-06-07T10:14:10Z")

</div>

Hi Dylan Good afternoon, I’m on Version 8.1.160 now and no changes Lux still not changing and SOS and Smartbutton no response Smartbutton also no battery readings.

Diagnostics: ff954bd3-027a-4c37-a682-d65759ee8aac

 ![1000032214](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/5/854ba5d74fc373d1e0ad296986adc34de211da00.jpeg)  
 ![1000032213](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/6/26a19287bfec365a6c6897674b9700de34da0312.jpeg)

Have a nice Sunday, regards Peter.

[Previous page](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352.md?page=99)

[Next page](https://community.homey.app/t/app-pro-universal-tuya-zigbee-device-app-test/140352.md?page=101)