# \[APP\]\[Pro\] Ubiquiti UniFi Network

**URL:** <https://community.homey.app/t/app-pro-ubiquiti-unifi-network/42967>\
**Category:** Apps\
**Created:** [February 14, 2021, 9:54am UTC](https://community.homey.app/t/app-pro-ubiquiti-unifi-network/42967 "2021-02-14T09:54:13Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![ObelixNL](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/obelixnl/32/172250_2.png) [@ObelixNL](https://community.homey.app/u/ObelixNL)\
**Post date:** [February 14, 2021, 9:54am UTC](https://community.homey.app/t/app-pro-ubiquiti-unifi-network/42967/1 "2021-02-14T09:54:13Z")

</div>

This app adds support for presence detection based on (wifi) clients connected to the UniFi Controller on your Homey.

**Device triggers:**

- Wifi device (dis-)connected
- Wifi device roams from one Accesspoint to any another
- Wifi device roams to specific Accesspoint

**Device conditions:**

- Wifi client is (dis-)connected
- Wifi client is (dis-)connected from accesspoint

**Generic triggers:**

- A client (dis-)connected
- First device is connected
- First device is connected to specific accesspoint
- Last device has disconnected
- Last device has disconnected from specific accesspoint
- A non-paired device (guest) has (dis-)connected

Please note: only paired devices are being considered as device in all flow contexts. Non-paired devices are only usable for the guest (dis-)connected trigger.

**Getting started:**

- Configure settings for UniFi Controller via Homey Settings panel.
  - If you have a custom site name, then first try default as site id. Then a list of site ids will be loaded.

- Go to Devices \> Add new device wizard
- Select device you want to pair with Homey.
  - It will only show devices known to your controller for the last 24 hours.

**Supported devices:**

- Wifi devices connected to UniFi accesspoints, connected via UniFi Controller.

For supported accesspoints, see [UniFi download page](https://www.ubnt.com/download/unifi/) for more information.

This version has been tested against version 5.7.x up to 6.0.x of the Ubiquiti UniFi Controller software. Lower versions might work too, but is untested.

_**Version 6.0.x is UnifiOS, please select ‘Port’ 443 and ‘UnifiOS Device (please use port 443)’ in the settings page. Please don’t use 2FA and use an local account.**_

**Supported Languages:**

- English
- Dutch
- Spanish

---

_[View the full topic](https://community.homey.app/t/app-pro-ubiquiti-unifi-network/42967)._