# \[APP\]\[Pro\] Tuya Zigbee App **URL:** \ **Category:** Apps\ **Created:** [February 26, 2020, 9:12am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439 "2020-02-26T09:12:23Z")\ **Posts on this page:** 20\ **Page:** 41
**Author:** ![Erik\_Kregting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/erik_kregting/32/79528_2.png) [@Erik\_Kregting](https://community.homey.app/u/Erik_Kregting)\ **Post date:** [November 19, 2024, 1:13pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5093 "2024-11-19T13:13:12Z")
I have a virtual device (thermostat) and IF the value changes THAN read the temp sensor and if value thermostat is higer than value sensor than start a io device(heater) I was expecting to read the value of the sensor with a card. ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [November 19, 2024, 1:20pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5094 "2024-11-19T13:20:36Z")
> [@Erik\_Kregting](#): > > I have a virtual device (thermostat) and IF the value changes THAN read the temp sensor and if value thermostat is higer than value sensor than start a io device(heater) > I was expecting to read the value of the sensor with a card. You do that with Logic cards: [https://support.homey.app/hc/en-us/articles/4410240765586-Using-Homey-Logic-in-Flows](https://support.homey.app/hc/en-us/articles/4410240765586-Using-Homey-Logic-in-Flows) ---
**Author:** ![Erik\_Kregting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/erik_kregting/32/79528_2.png) [@Erik\_Kregting](https://community.homey.app/u/Erik_Kregting)\ **Post date:** [November 19, 2024, 3:10pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5095 "2024-11-19T15:10:53Z")
![Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/4/a4be482b82684a3e9b34c0d09ea600b0f7df8fe4.jpeg) If i have a AND card and i selected the Somfy temp sensor i get the options 1 And if i selected the Tuya sensor i get the options at 2 I can read/see te device temp and humanity but not if i select a AND card. What is going wrong ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [November 19, 2024, 3:15pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5096 "2024-11-19T15:15:47Z")
> [@Erik\_Kregting](#): > > What is going wrong I already explained, twice, that you can use the built-in Logic cards to do exactly the same. This is how most apps work in Homey, they don’t provide these additional AND cards because you can use Logic cards. ---
**Author:** ![Erik\_Kregting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/erik_kregting/32/79528_2.png) [@Erik\_Kregting](https://community.homey.app/u/Erik_Kregting)\ **Post date:** [November 19, 2024, 3:26pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5097 "2024-11-19T15:26:31Z")
Oke, but if i use the built-in-logical cards i get exactly the same! ![Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/4/a4be482b82684a3e9b34c0d09ea600b0f7df8fe4.jpeg) ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [November 19, 2024, 3:29pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5098 "2024-11-19T15:29:28Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/7/57d707051a424e9f9a5f4f6d73b0e03d12572119.png) ---
**Author:** ![Erik\_Kregting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/erik_kregting/32/79528_2.png) [@Erik\_Kregting](https://community.homey.app/u/Erik_Kregting)\ **Post date:** [November 19, 2024, 4:24pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5099 "2024-11-19T16:24:07Z")
Thx for the understanding and persistence Robert 🙂 👍 Now i get it. I’m a programmer for occupation but this learning from scratch! ---
**Author:** ![calabuta](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/calabuta/32/80178_2.png) [@calabuta](https://community.homey.app/u/calabuta)\ **Post date:** [November 26, 2024, 12:19pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5103 "2024-11-26T12:19:32Z")
Hello, looking to buy a Curtain Module, does anyone know if they have a calibration setting on the homey app? So the open and close flow cards actually close properly. Thanks in advance! ---
**Author:** ![Paul\_Nas](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul_nas/32/80581_2.png) [@Paul\_Nas](https://community.homey.app/u/Paul_Nas)\ **Post date:** [November 26, 2024, 12:38pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5104 "2024-11-26T12:38:32Z")
@calabuta I recommend getting a Switchbot Curtain 3 to save yourself the frustration. They are incredibly easy to install and work well (via bluetooth). Calibration is automatic through their app. ---
**Author:** ![calabuta](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/calabuta/32/80178_2.png) [@calabuta](https://community.homey.app/u/calabuta)\ **Post date:** [November 26, 2024, 1:36pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5105 "2024-11-26T13:36:55Z")
I actually have a motor roller shader, that’s why I’m looking for a relay to control it, and I’m from Brazil, so we don’t have switchbot here, but plenty of tuya options ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [November 26, 2024, 7:53pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5106 "2024-11-26T19:53:36Z")
I see multiple replies in this thread about such mmWave presence detectors, but cannot find the exact ones with the mentioned product/Vendor ID’s: ![](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/a/eaca9061c27f5ec7be2fc22fe55a0da1366a5433.webp) I only see such devices (ceiling flush mount) at Tuya(?) Other nice to haves: 230V input Preferably Zigbee (evt WiFi or Z-wave) Small enough to built in (European/Dutch round flush mount boxes) as discrete as possible. But big enough to cover the complete box from the outside. Other considerations? ---
**Author:** ![dalo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dalo/32/114090_2.png) [@dalo](https://community.homey.app/u/dalo)\ **Post date:** [November 26, 2024, 9:14pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5107 "2024-11-26T21:14:38Z")
Do you know when you will publish the next release? Eager to check if the fingerbot will work after the issue fix ---
**Author:** ![LukasT](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lukast/32/83692_2.png) [@LukasT](https://community.homey.app/u/LukasT)\ **Post date:** [December 2, 2024, 3:01pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5108 "2024-12-02T15:01:51Z")
Thank you a lot! It helped me! My temperature: **Manufactured:** \_TZ3000\_bjawzodf **Product ID:** TY0201 There are two sensors when you +add device, I used first one. [HERE](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5059) in the topic ---
**Author:** ![Clement\_F](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/clement_f/32/144521_2.png) [@Clement\_F](https://community.homey.app/u/Clement_F)\ **Post date:** [December 2, 2024, 5:50pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5109 "2024-12-02T17:50:56Z")
Dear Homey Community, dear @johan_bendz , I have a few devices running successfully through the Tuya Zigbee experimental app on Homey. Recently, I purchased some buttons and presence/light sensors and managed to add and pair them without any issues: ![IMG_8135](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/d/9d7d609f00f33a5e2c025f69164d356273812ac4.jpeg) ![IMG_8136](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/9/b9a57ea6265851dce5484dbcb88a3ec4d7fe2c39.jpeg) However, I’ve encountered a couple of problems: 1. The sensors are not sending back any data. 2. The buttons are not registering any actions in Homey, regardless of how many times I click them. No activity is detected in my flows either. ![IMG_8134](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/f/4f49669e35bf4f0533432706f94a17d18143a9d7.jpeg) If anyone has advice or solutions, I’d greatly appreciate your help! Thank you in advance for your support. 😊 ---
**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\ **Post date:** [December 3, 2024, 3:17pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5110 "2024-12-03T15:17:10Z")
Hi Clement, Did you check if the Manufacturer ID \_TZ3000\_ja5osu5g exist in the Database listed in the beginning of this thread. Best regards Peter. ---
**Author:** ![Clement\_F](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/clement_f/32/144521_2.png) [@Clement\_F](https://community.homey.app/u/Clement_F)\ **Post date:** [December 3, 2024, 3:35pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5111 "2024-12-03T15:35:37Z")
Hi Peter, Indeed, the ID \_TZ3000\_ja5osu5g does not exist, so it’s understandable that it doesn’t work (although the ID TS004F does exist for other manufacturers). What should I do in this case? Should I request the addition of a Manufacturer ID? As for the other device, the temperature sensor \_TZE200\_3towulqd / TS0601 (TVO), it is listed at the beginning of the thread. However, it doesn’t report any metrics despite being powered, connected, and showing the same issue with all three devices I have. What would you recommend as the next steps? ---
**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\ **Post date:** [December 3, 2024, 3:47pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5112 "2024-12-03T15:47:48Z")
Hi Clement, You should go to GitHub and request to add this device. > **[Issues · JohanBendz/com.tuya.zigbee](https://github.com/JohanBendz/com.tuya.zigbee/issues)** > > Contribute to JohanBendz/com.tuya.zigbee development by creating an account on GitHub. And the other device report the issue also to Johan Bentz at GitHub. Best regards Peter. ---
**Author:** ![Clement\_F](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/clement_f/32/144521_2.png) [@Clement\_F](https://community.homey.app/u/Clement_F)\ **Post date:** [December 3, 2024, 5:33pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5113 "2024-12-03T17:33:42Z")
Done with donation ! Thanks Peter ---
**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\ **Post date:** [December 3, 2024, 6:22pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5114 "2024-12-03T18:22:45Z")
Your welcome 👍🏻😏 ---
**Author:** ![Peter\_Adell](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_adell/32/80627_2.png) [@Peter\_Adell](https://community.homey.app/u/Peter_Adell)\ **Post date:** [December 9, 2024, 6:47pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/5115 "2024-12-09T18:47:01Z")
Anyone got this sensor working in homey pro and zigbee? [https://www.zigbee2mqtt.io/devices/TH01Z.html](https://www.zigbee2mqtt.io/devices/TH01Z.html) [Previous page](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439.md?page=40) [Next page](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439.md?page=42)