# \[APP\]\[Pro\] Tuya Zigbee App **URL:** \ **Category:** Apps\ **Created:** [February 26, 2020, 9:12am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439 "2020-02-26T09:12:23Z")\ **Posts on this page:** 20\ **Page:** 32
**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\ **Post date:** [September 16, 2024, 8:55am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4912 "2024-09-16T08:55:40Z")
Hi Johan, Congratulations with the milestone, you did a great job, many thanks for that šŸ™šŸ» šŸ¾šŸ„‚ Best regards Peter. ---
**Author:** ![JvdMeulen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jvdmeulen/32/71049_2.png) [@JvdMeulen](https://community.homey.app/u/JvdMeulen)\ **Post date:** [September 16, 2024, 11:46am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4913 "2024-09-16T11:46:36Z")
Is the test-branch backwards compattible or do we need to reconfigure /re-pair everything? ---
**Author:** ![El\_Capitan](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/el_capitan/32/92941_2.png) [@El\_Capitan](https://community.homey.app/u/El_Capitan)\ **Post date:** [September 16, 2024, 12:14pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4914 "2024-09-16T12:14:24Z")
\<3 ---
**Author:** ![johan\_bendz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_bendz/32/10344_2.png) [@johan\_bendz](https://community.homey.app/u/johan_bendz)\ **Post date:** [September 16, 2024, 12:37pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4915 "2024-09-16T12:37:06Z")
> [@JvdMeulen](#): > > Is the test-branch backwards compattible or do we need to reconfigure /re-pair everything? It will not break anything in the Live version, but if you reinstall the Live version before I push test to live the devices that are only in the test version will not workā€¦ else you can move between them without issues. ---
**Author:** ![johan\_bendz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_bendz/32/10344_2.png) [@johan\_bendz](https://community.homey.app/u/johan_bendz)\ **Post date:** [September 17, 2024, 7:17am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4916 "2024-09-17T07:17:25Z")
> [@Peter\_van\_Werkhoven](#): > > no Battery level shown in the Siren \_TZE204\_t1blo2bj and no reading from Formaldehyde on the Smart airbox \_TZE200\_yvx5lh6k Hi @Peter_van_Werkhoven, Iā€™v reviewed the code and see no obvious errors for either of those. Please restart the app, trigger de devices and send me a diagnostic report. ---
**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\ **Post date:** [September 17, 2024, 5:53pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4917 "2024-09-17T17:53:09Z")
Hi Johan, Thanks for fixing the 1 channel dimmer switch, thatā€™s finally working fine now, the only thing maybe is that when adding itā€™s grouped with the Lamps. About the Smart Airbox \_TZE200\_yvx5lh6k, Ivā€™e re-started the App and also resetted the complete Zigbee network, trying to get a reading from the Smart Airbox but still no Formaldehyde data see 1st and 4th screenshot. About the Siren \_TZE204\_t1blo2bj, I see the Battery level now, the only thing there also should be a Temperature and Humidity sensor in it, but no data from those in the App see 2nd Screenshot. About the Smoke detector \_TZ3210\_up3pngle, they donā€™t give a battery level only Battery alarm, see 3th screenshot. About the Temperature and Humidity sensor with Display \_TZE200\_vvmbj46n, there is also no Battery level data only Battery alarm, see screenshot 5. And this is the diagnostic report, I donā€™t know if it is the right one ?? 3853bcb0-2d48-459c-9d96-c68ec81f365d Thanks in advance and Best regards Peter. > **(attachments)** > > ![Screenshot_2024-09-17-17-28-29-471_app.homey.jpg](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/3/73f144834403f1506b4f1e8c28fd03e24ecc0e7c.jpeg) > ![Screenshot_2024-09-17-17-06-58-051_app.homey.jpg](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/e/8e8f1858b003022f3832081cea96fc9fb8a0d402.jpeg) > ![Screenshot_2024-09-17-14-49-29-573_app.homey.jpg](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/a/8a7e614674e8961c8ae840ca62482b966eb7e031.jpeg) > ![Screenshot_2024-09-17-14-05-19-875_app.homey.jpg](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/f/af7bd6205d5fe1e7ec3a49a68a2c72688881082f.jpeg) > ![Screenshot_2024-09-17-19-46-47-075_app.homey.jpg](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/3/c317a56dd66bec41e3319ba60d3f9753b2a2d9cb.jpeg) ---
**Author:** ![johan\_bendz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_bendz/32/10344_2.png) [@johan\_bendz](https://community.homey.app/u/johan_bendz)\ **Post date:** [September 17, 2024, 8:46pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4918 "2024-09-17T20:46:57Z")
Hi @Peter_van_Werkhoven. Looks like Iā€™v received mixed info regarding formaldehyde in the **Airbox** , from what I can find the datapoint was faulty, fixed in next test version. Regarding the Siren there is two drivers, if the device you have should include temperature and humidity I think we only need oneā€¦ well wellā€¦ Iā€™v added your code to both devices meaning you will have to choose to install the one named **Siren, Temperature & Humidity Sensor** to get the correct functionality. If this works I will remove the driver without temperature and humidity. Iā€™v added code to have the **Smoke Detector** start reporting the battery percentage, could take up to four hours before it starts. Do tell me if this does not help. Same with the **Temperature & Humidity Sensor** with Display. ---
**Author:** ![Marcel\_Visser](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcel_visser/32/66024_2.png) [@Marcel\_Visser](https://community.homey.app/u/Marcel_Visser)\ **Post date:** [September 17, 2024, 9:42pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4919 "2024-09-17T21:42:26Z")
Thanks Johan! Can you please give me a hint when it has been added? Now I am trying to add it again and again after every update that is being released to see if itā€™s working which is a bit annoying with the speed of updates that are rolling out now. šŸ˜… ---
**Author:** ![Rocky\_Lonigro](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocky_lonigro/32/80350_2.png) [@Rocky\_Lonigro](https://community.homey.app/u/Rocky_Lonigro)\ **Post date:** [September 18, 2024, 8:12am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4920 "2024-09-18T08:12:48Z")
Please help me quick as I did not quite understand. Is the idea that I can ask zƤto add any Tuya device that can then directly be added to homey also the ones I have in my pic? ![1000057444](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/f/0f9313fa29209d785d8edcef4e8269026d1fe67a.jpeg) So i just have to add them as generic zigbee and then do the github thing? ---
**Author:** ![johan\_bendz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_bendz/32/10344_2.png) [@johan\_bendz](https://community.homey.app/u/johan_bendz)\ **Post date:** [September 18, 2024, 8:23am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4921 "2024-09-18T08:23:59Z")
> [@Rocky\_Lonigro](#): > > Please help me quick as I did not quite understand. Is the idea that I can ask zƤto add any Tuya device that can then directly be added to homey also the ones I have in my pic? > So i just have to add them as generic zigbee and then do the github thing? Thatā€™s correct @Rocky_Lonigro, you can ask to have any Tuya device added if it is not already in the Test version of the app. Head over to Github and create one issue per device, make sure to follow the instructions. Also, make sure there is not already a request at Github. šŸ˜ƒ ---
**Author:** ![Marcelo\_Leite](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcelo_leite/32/79656_2.png) [@Marcelo\_Leite](https://community.homey.app/u/Marcelo_Leite)\ **Post date:** [September 18, 2024, 11:35am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4922 "2024-09-18T11:35:36Z")
Hi @Johan_bendz, Iā€™m trying to add the Tuya Zigbee 4 Gangs device - \_TZE200\_shkxsgis / TS0601. (Device already requested on github and request already closed.) I have the Test version 0.2.53 of the app installed on my Hub, but when I try to install the device I get the following message: Unknown Zigbee Device Added ![Screenshot_20240918_080326_Homey1](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/b/0baaa9388940dec439bf9ddfe9cb0c52392cbd81.jpeg) ---
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [September 18, 2024, 11:43am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4923 "2024-09-18T11:43:42Z")
Did you select the Tuya Zigbee app and subsequently the 4 gang device when adding? ---
**Author:** ![Marcelo\_Leite](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcelo_leite/32/79656_2.png) [@Marcelo\_Leite](https://community.homey.app/u/Marcelo_Leite)\ **Post date:** [September 18, 2024, 11:57am UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4924 "2024-09-18T11:57:57Z")
Yes, I get the same message. ![Screenshot_20240918_085421_Homey1](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/b/5b180c7a91df2063ffb9460f768285298fe64f13.jpeg) ---
**Author:** ![johan\_bendz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_bendz/32/10344_2.png) [@johan\_bendz](https://community.homey.app/u/johan_bendz)\ **Post date:** [September 18, 2024, 1:19pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4925 "2024-09-18T13:19:16Z")
> [@Marcelo\_Leite](#): > > request already closed. Ooops, my bad. working on itā€¦ not at Github/app store yet. ---
**Author:** ![Marcelo\_Leite](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcelo_leite/32/79656_2.png) [@Marcelo\_Leite](https://community.homey.app/u/Marcelo_Leite)\ **Post date:** [September 18, 2024, 1:30pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4926 "2024-09-18T13:30:54Z")
No problem, Iā€™m looking forward to the addition of this and other devices. I still have some devices linked to Hubitatā€¦ lol ---
**Author:** ![Rocky\_Lonigro](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocky_lonigro/32/80350_2.png) [@Rocky\_Lonigro](https://community.homey.app/u/Rocky_Lonigro)\ **Post date:** [September 18, 2024, 4:24pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4927 "2024-09-18T16:24:28Z")
Iā€™m not sure what Im doing wrong, but I do interview it stays in that state for while, then it disappears but I cannot find the results of the interview? or is this under devices the right information: | Property | Value | | --- | --- | | ID | 929aa17c-1deb-475f-8dcc-2619922bf358 | | Name | Zigbee Device 6gang | | Class | socket | | Driver | homey:virtualdriverzigbee:driver | | Ready | Yes | | Available | Yes | | Warning | No | | Custom icon | No | ###### Data | Key | Value | | --- | --- | | token | ā€œb7b54b59-f262-4174-abc0-4fff4c8582d9ā€ | ###### Settings | Key | Value | | --- | --- | | zb\_product\_id | ā€œTS0046ā€ | | zb\_manufacturer\_name | ā€œ\_TZ3000\_iszegwpdā€ | | zb\_receive\_when\_idle | ā€œāØÆā€ | | zb\_device\_type | ā€œenddeviceā€ | | zb\_ieee\_address | ā€œa4:c1:38:03:92:c3:a1:b8ā€ | | zb\_sw\_build\_id | ā€œā€ | | zb\_touchlink\_group\_ids | ā€œā€ | | energy\_alwayson | false | | energy\_value\_off | null | | energy\_value\_on | null | in the interview thingy this is was happens no further info displayed: ![Screenshot 2024-09-18 183921](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/2/e27fb6c0b8ae07374fd9ec2401a511ac5abcee3e.png) ![{E38E0632-2DA5-461E-84C0-F8E9BE3EEA65}](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/1/f1c7251e5a9cf89665c02d583168268ae26a289f.png) ---
**Author:** ![Peter\_van\_Werkhoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_van_werkhoven/32/101322_2.png) [@Peter\_van\_Werkhoven](https://community.homey.app/u/Peter_van_Werkhoven)\ **Post date:** [September 18, 2024, 4:49pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4928 "2024-09-18T16:49:01Z")
Hi Johan, Thanks for your reply and sorting out the problems regarding the missing code for the Airbox and the battery information for the smoke detector and LCD temperature humidity sensor. For the Siren I deleted one of them and re-add it again using the one with temp & hum but couldnā€™t see any difference, so no readings temp & hum. Then I tried to restart en recover my Homey and now itā€™s stuck with starting up, only 1 Blue LED in the ring, I think that Robert Klep was right that my Homey was dying šŸ¤¬ Setup new ZigBee network with my spare Gateway and add the Siren there and there is also no temp & hum reading so obviously AliExpress gave the wrong info or they sended me Sirenā€™s without temp & hum sensors. Best regards and thanks again, Peter van Werkhoven Verzonden van mijn Xiaomi MI10 Lite 5G ---
**Author:** ![johan\_bendz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_bendz/32/10344_2.png) [@johan\_bendz](https://community.homey.app/u/johan_bendz)\ **Post date:** [September 18, 2024, 8:06pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4929 "2024-09-18T20:06:58Z")
Hi @Rocky_Lonigro, thatā€™s good info but I still need it at Github and not here: > **[Build software better, together](https://github.com/JohanBendz/com.tuya.zigbee/issues/new?assignees=&labels=New%2BDevice&projects=&template=tuya-zigbee---new-device-request.md&title=Device%2BRequest%2B-%2B%5BDevice%2Bname%5D%2B-%2B%5BmanufacturerName%5D%2B%2F%2B%5BmodelId%5D)** > > GitHub is where people build software. More than 100 million people use GitHub to discover, fork, and contribute to over 420 million projects. ---
**Author:** ![Rocky\_Lonigro](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocky_lonigro/32/80350_2.png) [@Rocky\_Lonigro](https://community.homey.app/u/Rocky_Lonigro)\ **Post date:** [September 18, 2024, 8:08pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4930 "2024-09-18T20:08:23Z")
I already put it in github: [Device Request - [Device name] - [manufacturerName] / [modelId] Ā· Issue #962 Ā· JohanBendz/com.tuya.zigbee Ā· GitHub](https://github.com/JohanBendz/com.tuya.zigbee/issues/962) I just was not sure as the template showed some json thing and I did not get any json out from that ā€œinterviewā€ is this enough and correct as is? ---
**Author:** ![johan\_bendz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_bendz/32/10344_2.png) [@johan\_bendz](https://community.homey.app/u/johan_bendz)\ **Post date:** [September 18, 2024, 8:09pm UTC](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439/4931 "2024-09-18T20:09:09Z")
> [@Peter\_van\_Werkhoven](#): > > For the Siren I deleted one of them and re-add it again using the one with temp & hum but couldnā€™t see any difference, so no readings temp & hum No worry, Iā€™m looking into this. [Previous page](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439.md?page=31) [Next page](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439.md?page=33)