# \[APP\]\[Pro\] Tuya Local **URL:** \ **Category:** Apps\ **Created:** [April 21, 2026, 10:24pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077 "2026-04-21T22:24:35Z")\ **Posts on this page:** 20\ **Page:** 7
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [July 7, 2026, 7:21am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/123 "2026-07-07T07:21:32Z")
Hi Frank Is the device allways online? (Battery driven device) Andi ---
**Author:** ![FrankP](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frankp/32/120754_2.png) [@FrankP](https://community.homey.app/u/FrankP)\ **Post date:** [July 7, 2026, 7:34am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/124 "2026-07-07T07:34:06Z")
Hi Andi, It’s powered by wire, not battery. It also has a camera which is always online. ---
**Author:** ![smarthomesven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/smarthomesven/32/79712_2.png) [@smarthomesven](https://community.homey.app/u/smarthomesven)\ **Post date:** [July 7, 2026, 9:01am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/125 "2026-07-07T09:01:21Z")
Hi, I think it’s not possible to access doorbells locally. AFAIK all Tuya cameras use a proprietary P2P protocol for streaming (just like most other cameras) and don’t support ONVIF or RTSP. ---
**Author:** ![FrankP](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frankp/32/120754_2.png) [@FrankP](https://community.homey.app/u/FrankP)\ **Post date:** [July 7, 2026, 9:17am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/126 "2026-07-07T09:17:54Z")
Not looking to control the camera. I just want local notifications for the doorbell. And the doorbell does support onvif. Hooked it up to my Syno Sureveillance station that way. ---
**Author:** ![Johnno\_50](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@Johnno\_50](https://community.homey.app/u/Johnno_50)\ **Post date:** [July 7, 2026, 11:34am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/127 "2026-07-07T11:34:06Z")
Hello, i got the tuya local app working fine with homey. With only one little thing. I got a Weau Heatpump, and the measured temperature is 10 times to high. This can be solved with the divider setting. But then the set temperature is also divided, and this one is correct without dividing. See my ouput: { “devId”: null, “uid”: null, “t”: null, “t\_local”: null, “cid”: null, “updatedAt”: “7-7-2026, 13:25:36”, “dps”: { “1”: true, “2”: “eheat”, “9”: 30, **\<---- set temp** “10”: 300, **\<---- measured temp** “20”: 0, “101”: 2, “102”: 40, “103”: 8, “104”: true } } IS there some solution? Thanks. ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [July 7, 2026, 1:42pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/128 "2026-07-07T13:42:00Z")
Could you please create an issue for support for a new device type on Github with all required Information (DP Table): [Issues · andiwirz/com.tuyalocal · GitHub](https://github.com/andiwirz/com.tuyalocal/issues) I‘ll work on it by next week. BR Andi ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [July 7, 2026, 1:44pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/129 "2026-07-07T13:44:25Z")
Hi John. Could you please create an issue on Github: [Issues · andiwirz/com.tuyalocal · GitHub](https://github.com/andiwirz/com.tuyalocal/issues) I‘ll add a fix for your issue by next week. BR Andi ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [July 7, 2026, 5:37pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/130 "2026-07-07T17:37:31Z")
> [@FrankP](#): > > doorbell does support onvif. Why not just use the Onvif Camera app instead? Just a thought. ---
**Author:** ![FrankP](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frankp/32/120754_2.png) [@FrankP](https://community.homey.app/u/FrankP)\ **Post date:** [July 8, 2026, 6:52am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/131 "2026-07-08T06:52:15Z")
Camera usage is covered already, it’s the doorbell function i’m looking for. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [July 8, 2026, 7:56am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/132 "2026-07-08T07:56:55Z")
It is / it should be possible, Frank, because it works fine with my Reolink doorbell. Otherwise I guess I wouldn’t have mentioned it 😉 Your Marmitek doorbell’s Onvif implementation _should_ provide for the doorbell event (depends on the manufacturer) , which is called “Visitor detected” @ my doorbell; This shows my doorbell with the Onvif app when the bell button is pressed: ![Screenshot_20260708_091325_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/b/cb0ed8862bc38144ba1b0d1bb024947e01776324.jpeg) ![1000078365](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/0/a09e8f10e5a53d01a15ec5fcec95c6e727d3ac04.jpeg) ![Screenshot_20260708_091436_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/4/942177e79a0e6b98d082038f78acc8f8bac01738.jpeg) ![1000078370](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/b/ebdc07dcfd50a9c89ef529cc73b42f467a40028f.jpeg) ---
**Author:** ![FrankP](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frankp/32/120754_2.png) [@FrankP](https://community.homey.app/u/FrankP)\ **Post date:** [July 8, 2026, 9:25am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/133 "2026-07-08T09:25:40Z")
Yeah, that wasn’t very succesful in the past. Will try this one again too. ---
**Author:** ![JaccoStraaijer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jaccostraaijer/32/11777_2.png) [@JaccoStraaijer](https://community.homey.app/u/JaccoStraaijer)\ **Post date:** [July 8, 2026, 8:17pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/134 "2026-07-08T20:17:27Z")
found it! | mode | Enum | | | --- | --- | --- | | | | | ```auto { "range": [ "Heat", "Cool", "Auto" ] } ``` Update 1 afterwards found PART of the error: heat,cool,auto should in case of Poolex be written with capital: Heat,Cool,Auto. Restarting the app and voila you can change the mode from homey, update 2 BUT, the homey device does not detect changes from the other side: change from mode not detected, change in temperature (per mode another temnperature is saved) is nog coming back to the homey device. The wrong temperature in the homey device seems to influence device behaviour. ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [July 12, 2026, 9:25pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/135 "2026-07-12T21:25:08Z")
> [@FrankP](#): > > ```auto > DP 101 basic_indicator Boolean true {} > DP 103 basic_flip Boolean false {} > DP 104 basic_osd Boolean true {} > DP 106 motion_sensitivity Enum 1 0, 1, 2 > DP 108 basic_nightvision Enum 0 0, 1, 2 > DP 109 sd_storge string 0|0|0 maxlen 255 > DP 110 sd_status value 5 1–5 step 1 > DP 111 sd_format Boolean false {} > DP 115 movement_detect_pic raw $ {} > DP 117 sd_format_state value -20000 -20000–200000 step 1 > DP 134 motion_switch Boolean false {} > DP 136 doorbell_active string 1783360353 maxlen 255 > DP 150 record_switch Boolean true {} > DP 151 record_mode Enum 2 1, 2 > DP 154 doorbell_pic raw {} > DP 155 doorbell_ring_exist Enum 0 0, 1 > DP 156 chime_ring_tune Enum 2 1, 2, 3, 4 > DP 157 chime_ring_volume Integer 100 0–100 step 1 > DP 160 basic_device_volume Integer 10 0–10 step 1 % > DP 165 chime_settings Enum 1 0, 1, 3 > DP 168 motion_area_switch Boolean false {} > DP 169 motion_area String maxlen 255 > DP 185 alarm_message raw eyJ2IjoiMy4wIiwiYnVja2V0IjoidHktZXUtc3RvcmFnZTMwLXBpYyIsImNtZCI6ImlwY19kb29yYmVsbCIsInR5cGUiOiJpbWFnZSIsIndpdGgiOiJyZXNvdXJjZXMiLCJmaWxlcyI6W1siL2JmMzAwMS0zOTc3MDI3OC1wcDAxMDBmNTIzZmQ3YmE2OGEzMi9kZXRlY3QvMTc4MzM2MDM1NC5qcGVnIiwiZDdkNTYzYWU3NDgxM2RjNCJdXX0= {} > DP 253 onvif_change_pwd string {"res":"ok"} > DP 254 onvif_ip_addr string 10.0.1.xx > DP 255 onvif_switch bool true > > ``` Please try the new Doorbell Driver in the newest TEST version: [Tuya Local | Homey](https://homey.app/a/com.tuyalocal/test/) ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [July 12, 2026, 9:32pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/136 "2026-07-12T21:32:00Z")
Could you please share the DP Table of the device? App settings → Cloud Lookup → Enter Cloud Access ID and Secret → Fetch Devices → Click on the Device → Copy DP Table (bottom) ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [July 12, 2026, 9:45pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/137 "2026-07-12T21:45:30Z")
> [@Johnno\_50](#): > > IS there some solution? The fix is now available in v1.0.93. The heat pump driver has a new setting: **“Measured Temperature Divisor (override)”** — in the device settings under _Temperature_. For your Weau heat pump, configure it like this: - **Temperature Divisor** → `1` (target temp DP 9 is already correct) - **Measured Temperature Divisor (override)** → `10` (DP 10 = 300 → 30.0°C) The main divisor stays at 1 so your set temperature (DP 9 = 30) is sent as-is. The override divides only the measured temperature reading by 10. Set it to `0` to fall back to the main divisor. ---
**Author:** ![Johnno\_50](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@Johnno\_50](https://community.homey.app/u/Johnno_50)\ **Post date:** [July 13, 2026, 1:34pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/138 "2026-07-13T13:34:06Z")
Hi Andi, Sorry for the absence. vacation and my wife demands some attention. I can comfirm that it works. Tnx for the fast fix ! Also for other users: DP mode 2 with a Weau full inverter 20: string: bheat = Boost heating eheat = Eco heating sheat = Silent heating bcool = Boost cooling ecool = Eco cooling scool = Silent cooling auto = Full automatic ---
**Author:** ![Luca\_Farronato](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/luca_farronato/32/169354_2.png) [@Luca\_Farronato](https://community.homey.app/u/Luca_Farronato)\ **Post date:** [July 13, 2026, 7:10pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/139 "2026-07-13T19:10:42Z")
Hi Andy, I successfully added a T/RH sensor using a generic device. It stay connected but the values are not refreshed. They do not move from the values captured at first connection. Any suggestion on how to fix-it? For now I’m running a flow that reconnect the device every xx seconds. Regards Luca ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [July 13, 2026, 7:23pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/140 "2026-07-13T19:23:16Z")
Hi Luca, Quick question: Is the sensor always connected via Wi‑Fi or LAN? If the device runs on batteries, the integration might not work reliably, since battery‑powered devices aren’t online continuously and often go into sleep mode. ---
**Author:** ![Luca\_Farronato](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/luca_farronato/32/169354_2.png) [@Luca\_Farronato](https://community.homey.app/u/Luca_Farronato)\ **Post date:** [July 13, 2026, 7:45pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/141 "2026-07-13T19:45:59Z")
Hi Andi, first of all thank you for the support and for your great job with this app. The sensor is connected via Wi-Fi and have it’s own power supply (no batteries). It run fine on SmartLife app. Luca ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [July 13, 2026, 8:00pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/142 "2026-07-13T20:00:19Z")
Could you please share the DP Table of the device? App settings → Cloud Lookup → Enter Cloud Access ID and Secret → Fetch Devices → Click on the Device → Copy DP Table (bottom) [Previous page](https://community.homey.app/t/app-pro-tuya-local/154077.md?page=6) [Next page](https://community.homey.app/t/app-pro-tuya-local/154077.md?page=8)