# \[APP\]\[Pro\] Tuya Local **URL:** \ **Category:** Apps\ **Created:** [April 21, 2026, 10:24pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077 "2026-04-21T22:24:35Z")\ **Posts on this page:** 20\ **Page:** 15
**Author:** ![Haakon\_Unelsrod](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/haakon_unelsrod/32/172374_2.png) [@Haakon\_Unelsrod](https://community.homey.app/u/Haakon_Unelsrod)\ **Post date:** [August 16, 2026, 3:40pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/286 "2026-08-16T15:40:33Z")
I’ve managed to get an Elko Smart Termostat (WiFi) connected, but its reporting the temperature using 2 digits for the fraction. Is there any chance you can add 100 as a temperature divisor? The current option is limited to 1 or 10. ![IMG_2868](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/0/d0a926695f5787e1dc7e75159dc6798328b6b0fd.png) ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 16, 2026, 3:44pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/287 "2026-08-16T15:44:35Z")
> [@Danny\_Daniels](#): > > Hey Andi > I have installed the app and added a few lights; it works fine. Do I need to create a static IP address for the Tuya devices? Hi Danny Yes — I’d recommend it. The app connects _to_ the device, so it needs the address to stay where it is. If your router hands the device a different IP later, the app keeps knocking at the old one and the device goes unavailable; the log then shows `EHOSTUNREACH` for that address. The cleanest way is a **DHCP reservation in your router** rather than a static address on the device itself — Tuya devices generally don’t let you set one anyway. On a Fritz!Box it’s the “always assign the same IPv4 address to this device” checkbox in the device’s detail view; other routers call it a static lease or address reservation. If it does happen, nothing is lost: look up the new address in your router and correct **IP address** in the device’s advanced settings. The local key stays valid — that only changes if you reset or re-pair the device in the Tuya app. Glad the lights are working Andi ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 16, 2026, 4:01pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/288 "2026-08-16T16:01:19Z")
> [@Haakon\_Unelsrod](#): > > Is there any chance you can add 100 as a temperature divisor? The current option is limited to 1 or 10. Please try the newest TEST version and let me know if it works: [Tuya Local | Homey](https://homey.app/a/com.tuyalocal/test/) Thank you ---
**Author:** ![Roberto\_Mario](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto_mario/32/68051_2.png) [@Roberto\_Mario](https://community.homey.app/u/Roberto_Mario)\ **Post date:** [August 16, 2026, 7:56pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/289 "2026-08-16T19:56:32Z")
Good evening, when I try to add a thermostat, after setting the IP, device ID, and local key and connecting. I see all the correct data (current temperature, set temperature, status), but when I try to save I get the error invalid\_setting\_type This is the DP cloud Name: studio ID: Local Key: Product: XH-CTW Category: wk UUID: studio DP 1 Power bool true DP 2 TempSet value 100 DP 3 TempCurrent value 265 DP 4 Mode enum Manual DP 6 ChildLock bool false DP 12 Fault bitmap 0 DP 101 C\_F bool false DP 102 Heating\_state bool false DP 103 Ext\_temperature value 890 DP 104 Days\_Holiday value 1 DP 105 Settemp\_Holiday value 15 DP 106 Hightemp\_Protect bool true DP 107 LowTemp\_Protect bool true DP 108 ext\_temp\_display bool false DP 109 room\_temp\_compensate value -10 DP 110 room\_temp\_zone value 5 DP 113 low\_temp\_limit value 5 DP 114 set\_temp\_max value 35 DP 115 set\_temp\_min value 5 DP 117 power\_state enum keep DP 118 Prog\_Type enum 2days DP 119 Prog\_Workday1 raw BgARhwARCwQT DP 120 Prog\_Workday2 raw EgATFgARFwAR DP 121 Prog\_Restday1 raw BgAPBwATCx4T DP 122 Prog\_Restday2 raw DR4TEQATFAAP DP — switch Boolean true {} DP — temp\_set Integer 100 5–1220 step 1 ℃ DP — child\_lock Boolean false {} DP — temp\_current Integer 265 0–1580 step 1 ℃ ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 16, 2026, 8:13pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/290 "2026-08-16T20:13:44Z")
Hi Roberto Please try the latest TEST version and let me know if it works now: [Tuya Local | Homey](https://homey.app/a/com.tuyalocal/test/) Thank you ---
**Author:** ![Haakon\_Unelsrod](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/haakon_unelsrod/32/172374_2.png) [@Haakon\_Unelsrod](https://community.homey.app/u/Haakon_Unelsrod)\ **Post date:** [August 17, 2026, 5:29am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/291 "2026-08-17T05:29:47Z")
Working perfectly. Thank you! ---
**Author:** ![Roberto\_Mario](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto_mario/32/68051_2.png) [@Roberto\_Mario](https://community.homey.app/u/Roberto_Mario)\ **Post date:** [August 17, 2026, 3:15pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/292 "2026-08-17T15:15:53Z")
I had some problems connecting to the thermostats. Out of six, I managed to connect four without any problems; the other two took a bit of trial and error. Everything works now. I even managed to find the dual switch, which, for some strange reason, advertises a MAC address, but uses a different one online. Overall, it’s a bit of a challenge, but I hope this is the end of the thousand attempts with apps that use cloud computing. ---
**Author:** ![Roberto\_Mario](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto_mario/32/68051_2.png) [@Roberto\_Mario](https://community.homey.app/u/Roberto_Mario)\ **Post date:** [August 18, 2026, 5:36am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/293 "2026-08-18T05:36:01Z")
I noticed a small issue with the app. My router and access points reset overnight. I assigned all DHCP reservations to ensure the same ones, but the app doesn’t automatically reconnect to the devices when the network comes back up. In the morning, I restart the app and everything works again. ---
**Author:** ![Guus\_Dijkstra](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/guus_dijkstra/32/121124_2.png) [@Guus\_Dijkstra](https://community.homey.app/u/Guus_Dijkstra)\ **Post date:** [August 18, 2026, 1:58pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/294 "2026-08-18T13:58:08Z")
Weather station WIFIWEST500WT I am trying to get this weatherstation working in my homey Pro. I have come a long way but i can’t get the datapoint mapping right. This are the available datapoints **DP** **Function / Name** **Debug Value** **Type** **Scale (scale)** **101** Indoor Temperature 251 number 0.1 **102** Indoor Humidity 520 number 0.1 **103** Outdoor Temperature 190 number 0.1 **104** Outdoor Humidity 810 number 0.1 **109** Atmospheric Pressure 10130 number 0.1 **110** UV Index / Sun Power 0 number 1 (none) **111** Wind Speed 0 number 0.1 **112** Wind Direction “SW” string N/A (String) **113** Rainfall 0 number 0.1 **114** Wind Gust / Extra 0 number 1 / 0.1 **126** Comfort Status “comfortable” string N/A (String) This is the current data in the Tuya local app. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/c/dcdd2d7e2ebde9372dcc248c66ac5264c3ef7782.png) Most values look ok ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/1/01afe98c920479577e727cdc3409875273c93e9b.jpeg) **The issue is that in homey the DP’s 112 and 126 are not showing a value. .** What would be the correct JSON setting to show these values in the correct way? That is een textstring. For DP 112 : ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/6/865bcc209330aa6c276a6c05100fadbf70a77209.png) For DP 126: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/2/129f433d374d139b3da3a498ff7906637581e68d.png) ---
**Author:** ![Guus\_Dijkstra](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/guus_dijkstra/32/121124_2.png) [@Guus\_Dijkstra](https://community.homey.app/u/Guus_Dijkstra)\ **Post date:** [August 18, 2026, 2:00pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/295 "2026-08-18T14:00:11Z")
Sorry the table was not copied correctly ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/3/935db19f6801ace968f4bcfc45a54596eb4c32a9.png) ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 18, 2026, 7:00pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/296 "2026-08-18T19:00:57Z")
Hi Roberto when the network returns, the app opens a connection to each device again. For devices on protocol 3.4 or 3.5 there is a key exchange right after the connection opens, and if the device doesn’t answer it — common while it is still starting up after a power cut — the app waited for a reply that never came. No timeout, no retry, and nothing written to the log. A device on 3.3 can end up in the same place: after several failed attempts the app tries the other protocol versions, and if the network comes back while it happens to be on 3.4 or 3.5, it gets stuck the same way. Restarting resets it to the configured version, which is why your mornings worked. There was a second half to it: the stalled connection was left open, and these devices accept exactly one connection at a time — so it kept the device unreachable even for later attempts. Both are fixed in **1.0.177**. The connection attempt now has its own time limit, and a handshake that goes unanswered is closed and retried like any other failure. Timeouts also get a proper explanation in the log now instead of a bare error line. I also added a flow action, **Reconnect devices** , which reconnects everything at once instead of needing one flow per device. You don’t need it for this bug any more, but it is handy on a schedule or a button after the network has misbehaved. The default, “offline devices only”, leaves working devices alone, so it is safe to run repeatedly. Please check new TEST version if it works for you: [Tuya Local | Homey](https://homey.app/a/com.tuyalocal/test/) Andi ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 18, 2026, 7:02pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/297 "2026-08-18T19:02:35Z")
Hi Guus Could you please provide the Cloud Lookup Table? Thank you Andi ---
**Author:** ![Roberto\_Mario](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto_mario/32/68051_2.png) [@Roberto\_Mario](https://community.homey.app/u/Roberto_Mario)\ **Post date:** [August 19, 2026, 2:32pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/298 "2026-08-19T14:32:47Z")
Thanks, I tried the suggested version, disabling the reset flows I had created. Last night, everything worked properly. I’ll keep monitoring the situation over the next few days. I’d like to ask something about the heating systems: I can’t control the oscillation and power level from the flow, even though both exist in the local and cloud DPs. ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 19, 2026, 9:43pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/299 "2026-08-19T21:43:21Z")
Hi Roberto Could you please provide the Cloud DP Table of the Heater? Thank you ---
**Author:** ![Roberto\_Mario](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto_mario/32/68051_2.png) [@Roberto\_Mario](https://community.homey.app/u/Roberto_Mario)\ **Post date:** [August 20, 2026, 5:14am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/300 "2026-08-20T05:14:46Z")
stufa bagno DP 1 switch Boolean false {} DP 2 temp\_set Integer 30 18–45 step 1 ℃ DP 3 temp\_current value 28 -9–79 step 1 ℃ DP 5 level Enum level\_1 1, 2, 3 DP 8 shake Boolean false {} DP 19 countdown\_set Enum cancel cancel, 1h, 2h, 3h, 4h, 5h, 6h DP 101 fenestration bool false As said before the problem is in the flow that it is not possible to set it ---
**Author:** ![Guus\_Dijkstra](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/guus_dijkstra/32/121124_2.png) [@Guus\_Dijkstra](https://community.homey.app/u/Guus_Dijkstra)\ **Post date:** [August 20, 2026, 1:17pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/301 "2026-08-20T13:17:43Z")
Hi Andi, is this what you need? Weerstation Guus in Tuya DP 1 temp\_current value -200 -200–600 step 1 ℃ DP 101 intemp Integer 244 -90–500 step 1 c DP 102 inhum Integer 560 200–950 step 1 % DP 103 ch1temp Integer 220 -400–600 step 1 C DP 104 ch1hum Integer 700 200–950 step 1 % DP 109 pressure Integer 10040 300–12000 step 1 hPa DP 110 windspeed Integer 4 0–2500 step 1 kph DP 111 gustwind Integer 5 0–2500 step 1 kph DP 112 wd Enum W N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW DP 113 rain\_1h Integer 0 0–60000 step 1 mm DP 114 rain\_24h Integer 310 0–60000 step 1 mm DP 126 com enum comfortable moist, dry, comfortable, na DP 127 alarm Raw AX8AAAYAAn8AAAgA maxlen 128 DP 128 alert Raw ZQADAfT/pmYAAwMgAMhnAAMCWP5waAADAyAAyA== maxlen 128 DP 129 unit Raw AQACAAMABAA= maxlen 128 DP 130 battery Raw AAQBBAL/A/8= maxlen 128 DP 131 basic Raw fwIHAACABGVmZ2iBLw== maxlen 128 DP 132 alertup bitmap 0 maxlen 11 DP 133 datadisplay Raw ZQBmAGcAaABpA2oDawNsAw== maxlen 128 DP 134 rain Integer 0 0–10000 step 1 mm Regards, Guus ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 20, 2026, 4:43pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/302 "2026-08-20T16:43:45Z")
Hi Roberto Please check the newest TEST version: [Tuya Local | Homey](https://homey.app/a/com.tuyalocal/test/) Andi ---
**Author:** ![Roberto\_Mario](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto_mario/32/68051_2.png) [@Roberto\_Mario](https://community.homey.app/u/Roberto_Mario)\ **Post date:** [August 20, 2026, 7:24pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/303 "2026-08-20T19:24:48Z")
Hi, I tried the new version. The level is indeed present, but changing it doesn’t change the object’s behavior. I tried to see how the cloud database changes when it’s changed from the SmartLife app. The enumerator changes between level\_1 level\_2 level\_3 I wrote a flow that allows me to set only the level, but it never changes even though no errors are shown in the log. I don’t know if this can be helpful, but on Tuya Developer Platform - Device Debug, the level has the following structure: level Enum { “range”: [ “1”, “2”, “3” ] } ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 20, 2026, 7:26pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/304 "2026-08-20T19:26:26Z")
Hi Guus Please install the latest TEST version and try the new Driver: [Tuya Local | Homey](https://homey.app/a/com.tuyalocal/test/) Andi ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [August 20, 2026, 7:37pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/305 "2026-08-20T19:37:51Z")
Hi Roberto Is the Heater on while you change the values? Please check again with the new version: [Tuya Local | Homey](https://homey.app/a/com.tuyalocal/test/) Andi [Previous page](https://community.homey.app/t/app-pro-tuya-local/154077.md?page=14) [Next page](https://community.homey.app/t/app-pro-tuya-local/154077.md?page=16)