# \[APP\]\[Pro\] Tuya Local

**URL:** <https://community.homey.app/t/app-pro-tuya-local/154077>\
**Category:** Apps\
**Created:** [April 21, 2026, 10:24pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077 "2026-04-21T22:24:35Z")\
**Posts on this page:** 20\
**Page:** 13

<div class="post-metadata">

**Author:** ![Michael\_F](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/michael_f/32/168209_2.png) [@Michael\_F](https://community.homey.app/u/Michael_F)\
**Post date:** [August 8, 2026, 1:07pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/245 "2026-08-08T13:07:47Z")

</div>

Hello,

I have a ceiling fan with a light that I’ve successfully integrated using Tuya Local. Unfortunately, I cannot create a flow to switch the light on and off; these parameters are not available.

The following specifications are available:

Ceiling Fan With Light  
DP 1 switch Boolean true {}  
DP 2 mode Enum normal normal, sleep, nature  
DP 3 fan\_speed Enum 4 1, 2, 3, 4, 5, 6  
DP 8 fan\_direction Enum forward forward, reverse  
DP 15 light Boolean false {}  
DP 16 bright\_value Integer 100 0–100 step 1  
DP 17 temp\_value Integer 60 0–100 step 1  
DP 22 countdown\_set Enum off cancel, 1h, 2h, 4h, 8h

So, it should be DP 15, but there is no value.

How can this be fixed?

Thanks in advance for any help.

Regards, Micha

---

<div class="post-metadata">

**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\
**Post date:** [August 8, 2026, 1:27pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/246 "2026-08-08T13:27:20Z")

</div>

Hello Micha

Two things — both quick.

The DPs aren’t filled in. Auto-detection only runs during pairing, so a fan added before light support existed has those fields empty. Open the device → Settings → Light (optional) and set:

Light On/Off DP → 15  
Light Brightness DP → 16  
Light Color Temp DP → 17  
Save; the light controls appear immediately. Tick Invert Color Temp if warm and cold end up swapped.

The flow cards are elsewhere. The light is a secondary on/off, and Homey only auto-generates cards for a device’s primary one. Use the app’s own instead: THEN → Turn light on/off, THEN → Set light brightness, AND → Light is on.

Make sure to use the TEST version: [Tuya Local | Homey](https://homey.app/a/com.tuyalocal/test/)

Andi

---

<div class="post-metadata">

**Author:** ![Michael\_F](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/michael_f/32/168209_2.png) [@Michael\_F](https://community.homey.app/u/Michael_F)\
**Post date:** [August 8, 2026, 3:23pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/247 "2026-08-08T15:23:29Z")

</div>

Hi Andi,

> [@Andi](#):
>
> THEN → Turn light on/off

Thanks for your feedback.  
The THEN → Turn light on/off option isn’t available. That’s the problem, after all.

😕

I uninstalled and reinstalled the app. Now the option with the light is showing up. That’s strange 🤔

---

<div class="post-metadata">

**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\
**Post date:** [August 9, 2026, 8:37pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/248 "2026-08-09T20:37:25Z")

</div>

> [@Michael\_F](#):
>
> Now the option with the light is showing up

Hi Michael - That mean’s the action card is available now?

Andi

---

<div class="post-metadata">

**Author:** ![Gerald\_Delhaisse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerald_delhaisse/32/80408_2.png) [@Gerald\_Delhaisse](https://community.homey.app/u/Gerald_Delhaisse)\
**Post date:** [August 9, 2026, 10:29pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/249 "2026-08-09T22:29:29Z")

</div>

Hello, I’m trying again with my extractor fan, which also measures humidity and temperature. I can connect it correctly, but it doesn’t respond to any commands. I checked via Network Analyzer and 1 out of 2 ports is OK. Do I need both? What else could I check? I’ll admit that the settings inside the Homey device aren’t very clear to me.

In Tuya, it’s identified as a fan controller—could that be making a difference? Thanks in advance for any tips 🙂

 ![1000005756](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/4/e45abfbd0d21d9c80d3fdea6a95f4f3aec2d5d56.png)

---

<div class="post-metadata">

**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\
**Post date:** [August 10, 2026, 4:50am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/250 "2026-08-10T04:50:06Z")

</div>

Did you try to change the tuya protocol versions?

---

<div class="post-metadata">

**Author:** ![Gerald\_Delhaisse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerald_delhaisse/32/80408_2.png) [@Gerald\_Delhaisse](https://community.homey.app/u/Gerald_Delhaisse)\
**Post date:** [August 10, 2026, 6:51am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/251 "2026-08-10T06:51:53Z")

</div>

Not all of them, when I tried it on another one, it said “not connected”. I’ll try them all tonight when I get home. Thanks

---

<div class="post-metadata">

**Author:** ![Gerald\_Delhaisse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerald_delhaisse/32/80408_2.png) [@Gerald\_Delhaisse](https://community.homey.app/u/Gerald_Delhaisse)\
**Post date:** [August 10, 2026, 3:29pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/252 "2026-08-10T15:29:06Z")

</div>

I just tried to change protocol, it’s not better I’m afraid. It’s this one, maybe the parameters are wrong in my configuration (10 levels only)

 ![1000005758](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/3/931454016dbd43de602409cad925a4338865b1b8.jpeg)

 ![1000005757](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/b/bb1c48b3cf2536da1a427b64a1e9ce7458da42ca.png)

---

<div class="post-metadata">

**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\
**Post date:** [August 10, 2026, 3:46pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/253 "2026-08-10T15:46:17Z")

</div>

A lot of zero’s → disabled values…

Could you please send me a complete DP table from the app settings (Cloud Lookup → Fetch Devices → Click on device → Copy DP table)?

---

<div class="post-metadata">

**Author:** ![Gerald\_Delhaisse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerald_delhaisse/32/80408_2.png) [@Gerald\_Delhaisse](https://community.homey.app/u/Gerald_Delhaisse)\
**Post date:** [August 10, 2026, 4:26pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/254 "2026-08-10T16:26:44Z")

</div>

Here’s :

Name: aérateur garage

ID:

Local Key:

Product: Fan Controller

Category: xfj

UUID:

---

<div class="post-metadata">

**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\
**Post date:** [August 10, 2026, 4:48pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/255 "2026-08-10T16:48:03Z")

</div>

You may want to remove the device ID and (private) local key from your post.

After fetching the devices you have to click your device and then click Copy DP Table.

 ![IMG_2872](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/4/64d088d4bc388d6c655d9d4e35f84353bdeb7a9d.jpeg)

---

<div class="post-metadata">

**Author:** ![Gerald\_Delhaisse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerald_delhaisse/32/80408_2.png) [@Gerald\_Delhaisse](https://community.homey.app/u/Gerald_Delhaisse)\
**Post date:** [August 10, 2026, 7:03pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/257 "2026-08-10T19:03:45Z")

</div>

aérateur garage

DP 1 switch Boolean true {}

DP 2 mode Enum ON ON, OFF, TIMER, AUTO, ALARM

DP 8 humidity\_indoor value 55 0–255 step 1 %

DP 9 temp\_indoor value 79 -40–255 step 1 °F

DP 101 BKLED Integer 4 0–4 step 1

DP 102 FAN\_SET Integer 5 0–10 step 1

DP 103 New\_Fan value 5 0–10 step 1

DP 104 time Integer 0 0–36000 step 1 s

DP 105 alarm enum 0 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

DP 106 AUTO\_HIGH\_TEMP Integer 90 32–194 step 1 °F

DP 107 AUTO\_HIGH\_HUMID Integer 68 0–100 step 1 %

DP 108 AUTO\_LOW\_TEMP Integer 61 32–194 step 1 °F

DP 109 AUTO\_LOW\_HUMID Integer 50 0–100 step 1 %

DP 110 ALARM\_HIGH\_TEMP Integer 109 32–194 step 1 °F

DP 111 ALARM\_HIGH\_HUMID Integer 90 0–100 step 1 %

DP 112 ALARM\_LOW\_TEMP Integer 39 32–194 step 1 °F

DP 113 ALARM\_LOW\_HUMID Integer 40 0–100 step 1 %

DP 114 lock Enum 0 0, 1

DP 115 unit Enum 0 0, 1

DP 116 high\_temp\_on\_off Enum 1 0, 1

DP 117 high\_huid\_on\_off Enum 1 0, 1

DP 118 low\_temp\_on\_off Enum 1 0, 1

DP 119 low\_huid\_on\_off Enum 1 0, 1

DP 120 alarm\_hight\_on\_off Enum 1 0, 1

DP 121 alarm\_huid\_on\_off Enum 1 0, 1

DP 122 alarm\_lowt\_on\_off Enum 1 0, 1

DP 123 alarm\_lowhu\_on\_off Enum 1 0, 1

DP 124 temp\_revise Integer 2 0–108 step 1 °F

DP 125 huid\_revise Integer 2 0–108 step 1 %

DP 126 aoto\_trigger\_data enum 0 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

---

<div class="post-metadata">

**Author:** ![Gerald\_Delhaisse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerald_delhaisse/32/80408_2.png) [@Gerald\_Delhaisse](https://community.homey.app/u/Gerald_Delhaisse)\
**Post date:** [August 10, 2026, 7:04pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/258 "2026-08-10T19:04:20Z")

</div>

Thank you, too fast to copy 👍

---

<div class="post-metadata">

**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\
**Post date:** [August 10, 2026, 7:37pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/259 "2026-08-10T19:37:58Z")

</div>

Thanks for the full DP Table. Use the **Generic Tuya Device** driver rather than the Fan driver — I ran your data points through the Fan driver’s auto-detection and it mismaps them.

pair the unit **only once**. Tuya firmware accepts a single local connection, so adding it twice makes the two entries fight over that one slot.

Add it as _Generic Tuya Device_, paste this into **DP Mapping (JSON)** in the advanced settings, then restart the app:

```json
[
  {"dp":1,"cap":"onoff","label":"Ventilator","settable":true},
  {"dp":2,"cap":"generic_picker_1","label":"Mode","settable":true,"options":"ON,OFF,TIMER,AUTO,ALARM"},
  {"dp":8,"cap":"measure_humidity","label":"Humidity","settable":false,"scale":1},
  {"dp":9,"cap":"measure_temperature","label":"Temperature","settable":false,"scale":1},
  {"dp":102,"cap":"generic_number_1","label":"Fan speed","settable":true,"min":0,"max":10,"step":1},
  {"dp":103,"cap":"generic_sensor_1","label":"Fan speed (actual)","settable":false},
  {"dp":104,"cap":"generic_number_2","label":"Timer","settable":true,"min":0,"max":36000,"step":60,"unit":"s"},
  {"dp":101,"cap":"generic_picker_2","label":"Backlight","settable":true,"options":"0,1,2,3,4"},
  {"dp":105,"cap":"generic_picker_3","label":"Alarm code","settable":false,"options":"0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"},
  {"dp":114,"cap":"generic_switch_1","label":"Panel lock","settable":true,"readMap":{"0":false,"1":true},"writeMap":{"false":"0","true":"1"}},
  {"dp":116,"cap":"generic_switch_2","label":"High-temp alarm","settable":true,"readMap":{"0":false,"1":true},"writeMap":{"false":"0","true":"1"}},
  {"dp":117,"cap":"generic_switch_3","label":"High-humidity alarm","settable":true,"readMap":{"0":false,"1":true},"writeMap":{"false":"0","true":"1"}},
  {"dp":115,"cap":"generic_switch_4","label":"Unit is Celsius","settable":true,"readMap":{"0":false,"1":true},"writeMap":{"false":"0","true":"1"}}
]

```

The eight thresholds (DP 106–113) and the remaining alarm toggles (DP 118–123) don’t fit — the driver has two numeric sliders and four switches and this uses them all. Those are set-once values, so I’d configure them in the Tuya app.

Let me know if it works

---

<div class="post-metadata">

**Author:** ![Gerald\_Delhaisse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerald_delhaisse/32/80408_2.png) [@Gerald\_Delhaisse](https://community.homey.app/u/Gerald_Delhaisse)\
**Post date:** [August 10, 2026, 8:37pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/260 "2026-08-10T20:37:12Z")

</div>

I had no idea what I was doing, I just followed blindly, and my God, it works!! You’re the Copperfield of Homey (or the Gandalf, depending on your references)—it feels that magical 😎 A thousand thanks for taking the time and for your patience with a beginner like me!

---

<div class="post-metadata">

**Author:** ![Simon\_Kai](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/simon_kai/32/79941_2.png) [@Simon\_Kai](https://community.homey.app/u/Simon_Kai)\
**Post date:** [August 11, 2026, 5:58pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/261 "2026-08-11T17:58:23Z")

</div>

Hello, I’d like to integrate this device locally:

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/5/05622f4454a3b4fda1525a891ebcd43e18ed0b0c.png)

I’ve already tried using it as a doorbell and also as a generic device. Unfortunately, without success.

I have already tried monitoring these values, but there is no change:

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/0/3014dbe66a5a6c3dd378c0ea959ccab9e28cce05.png)

I get notified of the ringing via the cloud, but a local solution would be much nicer.

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/d/9db9ce5382e71921ccf6ee5e77a22a48fa630ff0.png)

I am very grateful for help.

---

<div class="post-metadata">

**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\
**Post date:** [August 11, 2026, 7:25pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/262 "2026-08-11T19:25:46Z")

</div>

Could you please provide the full DP table?

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/3/a35f1b66d029e3974256382f9131a5a551e8afee.jpeg)  
@SunBeech Thank you for the screenshot 🙂

---

<div class="post-metadata">

**Author:** ![Simon\_Kai](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/simon_kai/32/79941_2.png) [@Simon\_Kai](https://community.homey.app/u/Simon_Kai)\
**Post date:** [August 11, 2026, 8:41pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/263 "2026-08-11T20:41:11Z")

</div>

I suspect it simply sends a ‘1’ on DP10, but that value doesn’t change, so I can’t query it.

Türklingel  
DP 1 doorbell\_list\_data raw BAQBDAheAP8WAFQA/AByAGsAbABpAG4AZwBlACAAMQ==   
DP 2 doorbell\_ring\_value Integer 8 0–32 step 1  
DP 3 doorbell\_volume\_value Integer 94 0–100 step 1  
DP 4 switch\_night\_light Boolean false {}  
DP 5 alarm\_message raw AFQA/AByAGsAbABpAG4AZwBlACAAMQ==   
DP 6 alarm\_propel\_switch Boolean true {}  
DP 7 disturb\_time\_set raw PMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD/zzDPMP/PMM8w/88wzzD   
DP 10 doorbell\_call value 1 1–8 step 1

---

<div class="post-metadata">

**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\
**Post date:** [August 11, 2026, 8:54pm UTC](https://community.homey.app/t/app-pro-tuya-local/154077/264 "2026-08-11T20:54:38Z")

</div>

Hi Simon

Is the Control Instruction mode set to DP instruction?

> [@\[APP\]\[Pro\] Tuya Local](https://community.homey.app/t/app-pro-tuya-local/154077/187):
>
> Are those devices configured to use DP instructions on [Tuya Developer Platform](https://platform.tuya.com/)?

---

<div class="post-metadata">

**Author:** ![Mark1541](https://avatars.discourse-cdn.com/v4/letter/m/838e76/32.png) [@Mark1541](https://community.homey.app/u/Mark1541)\
**Post date:** [August 12, 2026, 11:25am UTC](https://community.homey.app/t/app-pro-tuya-local/154077/265 "2026-08-12T11:25:22Z")

</div>

i got the message cloud api subscription is not valid Do i need to renew?

And if i fill in this fields once So no api substription is requred

[Previous page](https://community.homey.app/t/app-pro-tuya-local/154077.md?page=12)

[Next page](https://community.homey.app/t/app-pro-tuya-local/154077.md?page=14)