# \[APP\]\[Pro\] TP-Link Deco **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [September 4, 2024, 9:31pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521 "2024-09-04T21:31:36Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Robin\_van\_Kekem](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robin_van_kekem/32/8187_2.png) [@Robin\_van\_Kekem](https://community.homey.app/u/Robin_van_Kekem)\ **Post date:** [September 6, 2024, 4:46am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/21 "2024-09-06T04:46:27Z")
> **[Use private Wi-Fi addresses on iPhone, iPad, iPod touch, and Apple Watch -...](https://support.apple.com/en-us/102509)** > > To improve privacy, your device uses a different MAC address with each Wi-Fi network. ---
**Author:** ![MathiasT](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mathiast/32/84876_2.png) [@MathiasT](https://community.homey.app/u/MathiasT)\ **Post date:** [September 6, 2024, 7:03am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/22 "2024-09-06T07:03:51Z")
Thanks Robin for your Quick answer. I suggest that you turn off per network then you can track the MAC address for your device. ---
**Author:** ![Robin\_van\_Kekem](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robin_van_kekem/32/8187_2.png) [@Robin\_van\_Kekem](https://community.homey.app/u/Robin_van_Kekem)\ **Post date:** [September 6, 2024, 8:20am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/23 "2024-09-06T08:20:38Z")
Yes. To have your app keep track of Apple, Android and even Windows devices correctly, users should disable MAC address changing when reconnecting to the home wifi. Here is the manual for Windows: [How to use random hardware addresses in Windows - Microsoft Support](https://support.microsoft.com/en-us/windows/how-to-use-random-hardware-addresses-in-windows-ac58de34-35fc-31ff-c650-823fc48eb1bc#:~:text=random%20hardware%20addresses.-,Use%20random%20hardware%20addresses%20for%20a%20specific%20network%3A,hardware%20addresses%20for%20this%20network). ---
**Author:** ![Arnold\_vd\_Linden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arnold_vd_linden/32/19336_2.png) [@Arnold\_vd\_Linden](https://community.homey.app/u/Arnold_vd_Linden)\ **Post date:** [September 6, 2024, 2:12pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/24 "2024-09-06T14:12:00Z")
I did try this app today but unfortunately it didn’t work well. After one hour or so the app wasn’t updating and only a restart of the did solve this. And then after about one hour it has the same issue. Is there something I did wrong? I only added one device, the main Deco, and kept all the setting standard. ---
**Author:** ![MathiasT](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mathiast/32/84876_2.png) [@MathiasT](https://community.homey.app/u/MathiasT)\ **Post date:** [September 7, 2024, 6:23am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/25 "2024-09-07T06:23:44Z")
There is a bug in an underlying module. I have solved it as I’m working on a new release. I will publish it and we have to wait for Homey to approve ---
**Author:** ![Arnold\_vd\_Linden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arnold_vd_linden/32/19336_2.png) [@Arnold\_vd\_Linden](https://community.homey.app/u/Arnold_vd_Linden)\ **Post date:** [September 7, 2024, 6:50am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/26 "2024-09-07T06:50:43Z")
Thank you for your effort and reply. I wil give a try on the next release. ---
**Author:** ![TheDude](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thedude/32/9428_2.png) [@TheDude](https://community.homey.app/u/TheDude)\ **Post date:** [September 7, 2024, 8:22am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/27 "2024-09-07T08:22:32Z")
First of all nice work! Any idea if M5, M4 Deco will be supported in future? Right now I get an empty selection when adding a M5. Cheers! ---
**Author:** ![MathiasT](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mathiast/32/84876_2.png) [@MathiasT](https://community.homey.app/u/MathiasT)\ **Post date:** [September 7, 2024, 8:57am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/28 "2024-09-07T08:57:45Z")
If you could open wireshark and browse to your units one by one. You need to click around in the UI. For each device send me the capture. I could then compile a small test program that will fetch the JSONs and I can work from there. ---
**Author:** ![TheSource](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thesource/32/53900_2.png) [@TheSource](https://community.homey.app/u/TheSource)\ **Post date:** [September 7, 2024, 4:22pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/29 "2024-09-07T16:22:44Z")
Just found this app, great work ! Some app feedback from my side: - It would be user friendly to also accept [http://192.168.1.81/](http://192.168.1.81/) instaed only 192.168.1.81 - I always use [http://tplinkdeco.net/](http://tplinkdeco.net/) to login, I didn’t know I had a local interface as well. Maybe this can be added to the description as well. - I first added a slave which didn’t gave any info. From the local web interface I could also only update firmware. Not sure what the idea here is, if I should all them all or only the master? - I have a mixed mesh, 4x X50 + 1x X50 outdoor (all cabled backhaul to the master via switches). When adding the master it didn’t show up after loggin in, after clicking in your app it should up. Not sure if this was a time-out before it appeard or if I clicked it visible. Also the node name was pretty weird (like a code… not X50). - Strange. I notice that my master in Homey, reports data, with the IP of my master node, however it claims to be the X50 Outlook with it’s MAC of the X50 Outdoor claiming to be a slave. Going to test some more to see it if was a glitch or if I can reproduce it. Edit Confirmed. - I cannot add my X50 Outdoor slave. Adding other slaves works. - When adding my Master it take time before it shows up, the funny name is (R2FyYWdl) not sure where it comes from. It again reports with the IP of the X50 main to be the X50 Outdoor, slave and the MAC of the X50 Outdoor. This time it doesn’t reports data. - when logging in on the webinterface of the X50 outdoor it also only get firmware update possiblity. - removed everything and added main again. Same behaviour, however not it shows data, unlike my 2nd time. ---
**Author:** ![MathiasT](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mathiast/32/84876_2.png) [@MathiasT](https://community.homey.app/u/MathiasT)\ **Post date:** [September 7, 2024, 10:35pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/30 "2024-09-07T22:35:00Z")
Thanks. I’m working on a new release, and I will include some or all of your suggestions, maybe in stages—more units to be supported. I have contacted TP-Link Sweden to see if I can borrow some units to develop more support. ---
**Author:** ![Joris\_Vandamme](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joris_vandamme/32/66995_2.png) [@Joris\_Vandamme](https://community.homey.app/u/Joris_Vandamme)\ **Post date:** [September 8, 2024, 8:14am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/31 "2024-09-08T08:14:20Z")
Maybe a simple question, but where can I find the hostname and the password in the Deco (iOS) app? ---
**Author:** ![MathiasT](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mathiast/32/84876_2.png) [@MathiasT](https://community.homey.app/u/MathiasT)\ **Post date:** [September 8, 2024, 8:55am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/32 "2024-09-08T08:55:51Z")
Hostname/IP is your gateway ip YouTube Norway have 192.168.1.1 or as me 192.168.68.1. You can use ‘[tplinkdeco.net](http://tplinkdeco.net)’. To find it in the app. You click on the device map. Then you will see a list of your devices tap on that. At the top on next screen you have a little button ‘device info\>’. The password is the same as you login to your tplink account. ---
**Author:** ![DaanV](https://avatars.discourse-cdn.com/v4/letter/d/5daacb/32.png) [@DaanV](https://community.homey.app/u/DaanV)\ **Post date:** [September 8, 2024, 2:09pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/33 "2024-09-08T14:09:29Z")
My Deco X60 works fine with the app. Thank for your work! ---
**Author:** ![TimVW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/timvw/32/79069_2.png) [@TimVW](https://community.homey.app/u/TimVW)\ **Post date:** [September 8, 2024, 3:04pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/34 "2024-09-08T15:04:45Z")
Hope there will be an update soon as I have to reboot the Deco app once a day. Keep up the good work! ---
**Author:** ![MathiasT](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mathiast/32/84876_2.png) [@MathiasT](https://community.homey.app/u/MathiasT)\ **Post date:** [September 8, 2024, 5:38pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/35 "2024-09-08T17:38:59Z")
You can follow the latest some time unstable releases > **[TP-Link Deco](https://homey.app/sv-se/app/net.tornbloms.deco/TP-Link-Deco/)** > > Överlägsen Mesh WiFi, överallt ---
**Author:** ![AndRacer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andracer/32/13887_2.png) [@AndRacer](https://community.homey.app/u/AndRacer)\ **Post date:** [September 8, 2024, 7:12pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/36 "2024-09-08T19:12:27Z")
Deco m9 plus is working ---
**Author:** ![Jim\_Gubbels](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jim_gubbels/32/96244_2.png) [@Jim\_Gubbels](https://community.homey.app/u/Jim_Gubbels)\ **Post date:** [September 9, 2024, 6:18am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/37 "2024-09-09T06:18:06Z")
The app works fine with my 5 Deco X60. Thank for your effort! ---
**Author:** ![D\_J](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/d_j/32/79161_2.png) [@D\_J](https://community.homey.app/u/D_J)\ **Post date:** [September 9, 2024, 8:33am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/38 "2024-09-09T08:33:02Z")
Works fine on my old M5´s ---
**Author:** ![MikeT87](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/miket87/32/113305_2.png) [@MikeT87](https://community.homey.app/u/MikeT87)\ **Post date:** [September 9, 2024, 11:41am UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/39 "2024-09-09T11:41:32Z")
I’ve add all my Deco’s (4pcs) manually. Only the basic/home (x50) one is giving some information. Others give me this screen: (all are X20’s) ![Naamloos](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/7/2783e4afc527aa7be46629ea2d1dd07762662c9e.jpeg) ---
**Author:** ![TimVW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/timvw/32/79069_2.png) [@TimVW](https://community.homey.app/u/TimVW)\ **Post date:** [September 9, 2024, 3:13pm UTC](https://community.homey.app/t/app-pro-tp-link-deco/115521/40 "2024-09-09T15:13:35Z")
ec2cbbd4-31cf-4f2f-a10c-00770cb6b05b Keeps crashing after update v1.1.20 Tim [Previous page](https://community.homey.app/t/app-pro-tp-link-deco/115521.md?page=1) [Next page](https://community.homey.app/t/app-pro-tp-link-deco/115521.md?page=3)