# \[APP\]\[Pro\] Toon P1 - Reuse your Toon meteradapter (P1) with Homey

**URL:** <https://community.homey.app/t/app-pro-toon-p1-reuse-your-toon-meteradapter-p1-with-homey/161527>\
**Category:** Apps\
**Created:** [October 30, 2026, 2:09am UTC](https://community.homey.app/t/app-pro-toon-p1-reuse-your-toon-meteradapter-p1-with-homey/161527 "2026-10-30T02:09:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wisefire](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wisefire/32/180787_2.png) [@Wisefire](https://community.homey.app/u/Wisefire)\
**Post date:** [October 30, 2026, 2:09am UTC](https://community.homey.app/t/app-pro-toon-p1-reuse-your-toon-meteradapter-p1-with-homey/161527/1 "2026-10-30T02:09:07Z")

</div>

Eneco’s Toon is being discontinued in 2027. That leaves a lot of Toon **meteradapters** (the Quby/Eneco box on the smart meter’s P1 port, Quby 6500-1400-6000, Z-Wave) without a purpose. They’re perfectly good P1 readers, and I’d rather see them reused with Homey than thrown away.

I’ve built a Homey app for it, **Toon P1** (test version): [Toon P1 | Homey](https://homey.app/a/nl.wisefire.eneco-meteradapter/test/)

Status:

- ✅ Pairs with Homey (after “Remove any node” in Developer Tools to free it from the old Toon network)
- ✅ **Gas** reading works and matches the meter exactly
- ❌ **Electricity** (used, returned, current power): the adapter **does** send the values, but **Homey’s Z-Wave parser discards them** before any app receives them

**The technical bit (for Athom):** the adapter reports through the Meter Table Monitor command class (0x3D), `METER_TBL_CURRENT_DATA_REPORT`. Homey parses the header but always returns an empty variant group (`"vg": []`), even though the raw frame in Homey’s own Z-Wave log contains the readings. For example, endpoint 6 sends `… 60 00 11 d1 35 67 00 00 02 40`, which is 1167.669 kWh and 0.576 kW. Apps can’t work around this: the Z-Wave log needs the `homey.system` scope, which apps, HomeyScript and Web API clients don’t get.

Bug report with full details and a byte-by-byte breakdown: [https://github.com/athombv/homey-apps-sdk-issues/issues/484](https://github.com/athombv/homey-apps-sdk-issues/issues/484)

**Other meteradapter versions:**

- **Older Prodrive adapter** (label “Eneco - Meteradapter”, PN 6599-1500-xxxx, also known as “ED2.0 Meter Adapter”, from the Toon 1 era). Different Z-Wave manufacturer ID (0x0128) and, as far as known, no standard Meter command class, so the app doesn’t recognise it yet and even gas may not work.
- **Engie version** (Quby EN00, sold with Engie’s Toon/“Boxx”, Z-Wave IDs 0x0130 / 0x0002 / 0x0001). Probably the same hardware as the supported one. The app should recognise it, but it’s untested: please report whether gas shows up.

If you have one of these, I’d love your help: pair it with Homey, open Developer Tools → Z-Wave, and post its manufacturer ID, product type ID, product ID and the label on the device.

**How you can help:**

- Have a Toon meteradapter and a Homey? Reply with your Homey model and software version, and whether you’d wanna use this app. The more owners reply, the more likely Athom prioritises it.
- **Athom:** a fix to the 0x3D variant group parsing (or at least filling `vg (Raw)`) is all that’s needed. The app already decodes the values, so electricity would start working immediately, without an app update.

Tested on Homey Pro (Early 2019), software 13.5.3, with a Kaifa MA105 (DSMR 5) smart meter.