# \[APP\]\[Pro\] Support for ONVIF compatible cameras (Release 2.0.70, Test 2.0.70) **URL:** \ **Category:** Apps\ **Created:** [April 14, 2020, 4:57pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377 "2020-04-14T16:57:37Z")\ **Posts on this page:** 20\ **Page:** 75
**Author:** ![To\_Lou](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/to_lou/32/79159_2.png) [@To\_Lou](https://community.homey.app/u/To_Lou)\ **Post date:** [August 18, 2024, 10:23am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1502 "2024-08-18T10:23:02Z")
Me too, have double notifications triggered on Reolink RLC-510WA. Even if specified only ‘person detection’ trigger. Had for quite some time(not before). Thought you could have a look? Log sent. @Adrian_Rockall ---
**Author:** ![BlackLoontus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/blackloontus/32/82545_2.png) [@BlackLoontus](https://community.homey.app/u/BlackLoontus)\ **Post date:** [September 23, 2024, 9:26pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1505 "2024-09-23T21:26:14Z")
Hi all, I have the app working for my Reolink RLC-830A. My Reolink app has a button that I can press to switch the Spotlight on and off. I was wondering, is it possible to create a flow to achieve that same thing: switching the spotlight on/off? What settings would I have to specify and where? ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 23, 2024, 10:11pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1506 "2024-09-23T22:11:57Z")
Sorry, that’s not currently supported. ---
**Author:** ![Marc\_Straat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marc_straat/32/71941_2.png) [@Marc\_Straat](https://community.homey.app/u/Marc_Straat)\ **Post date:** [September 25, 2024, 2:57pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1507 "2024-09-25T14:57:04Z")
Is there anyone who has motion detection enabled and working. I did already a lot of research but can’t get the trigger working in Homey. Thanks for any help ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 25, 2024, 3:25pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1508 "2024-09-25T15:25:55Z")
I have it working on 3 different camera models here. As there are a few thousand users of the app, I guess there must be others as well 😉 Can you open the app settings page and select the Diagnostic log tab. Then change the Log level to Detailed Information. Trigger motion on the camera and then send the log. Hopefully it will come through, although my email server is under attack at the moment and I’m getting hundreds of messages per minute for failed login attempts. 😭 ---
**Author:** ![Marc\_Straat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marc_straat/32/71941_2.png) [@Marc\_Straat](https://community.homey.app/u/Marc_Straat)\ **Post date:** [September 25, 2024, 5:15pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1509 "2024-09-25T17:15:20Z")
Adrian, I sent you the log just a few minutes ago, I hope it comes trough. Thanks in advance. Br, Marc ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 25, 2024, 5:57pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1510 "2024-09-25T17:57:29Z")
I have a log but it’s pretty empty. I presume you did change the setting to Detailed Information? Have you turned on motion detection in the device? ![Screenshot_20240925_185815_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/1/51e5b6dbd9d9c03a734930c905c00f52620e57f9.jpeg) ---
**Author:** ![Marc\_Straat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marc_straat/32/71941_2.png) [@Marc\_Straat](https://community.homey.app/u/Marc_Straat)\ **Post date:** [September 26, 2024, 11:56am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1511 "2024-09-26T11:56:57Z")
![1000034905](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/d/edfb64d50fa74a0ba9062d3cb7e19e090fbd9ff8.jpeg) That makes sense, I switched it on now and sent the log again. In dutch this page says “Montion Detected” so I thought this went to green the moment motion was detected. Not sure where to change the translation in dutch but it would be beter to name it “Schakel bewegingsdetectie in” ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 26, 2024, 12:21pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1512 "2024-09-26T12:21:11Z")
I will change the Dutch text. The English used to be “Motion Detection” which also confused users, so I changed that but forgot to update the other languages. The new log shows it is enabling pull requests, but I’m not seeing any triggers coming back. Did you move about in front of the camera while logging data? ---
**Author:** ![Marc\_Straat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marc_straat/32/71941_2.png) [@Marc\_Straat](https://community.homey.app/u/Marc_Straat)\ **Post date:** [September 26, 2024, 12:36pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1513 "2024-09-26T12:36:43Z")
Yep I moved arround during logging. Alarmlog from camera says: Humanbody detected 11:40:34 Motion detected11:40:36 Humanbody detected 11:40:41 Motion detected11:40:42 Humanbody detected 11:40:47 Motion detected11:40:48 IP-address of this camera is: 192.168.1.33 ---
**Author:** ![Marc\_Straat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marc_straat/32/71941_2.png) [@Marc\_Straat](https://community.homey.app/u/Marc_Straat)\ **Post date:** [September 27, 2024, 5:45pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1514 "2024-09-27T17:45:04Z")
What is the default listening port for the push server? Is this the port where the triggers should comeback? I scanned the ports on the camera I have found several reachable ports with command nmap -p- with the following services which one should I fill in in the listening port http https rtsp http-alt jamlink trivnet1 unknown Any ideas/suggestions ---
**Author:** ![Asterix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/asterix/32/45768_2.png) [@Asterix](https://community.homey.app/u/Asterix)\ **Post date:** [October 5, 2024, 5:17am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1515 "2024-10-05T05:17:02Z")
Hello Adrian Here are two more cameras for your list that are supported by your app: - Reolink RLC-823A 16X - Reolink Track Mix Wifi All functions of the camera are taken over in Homey, except the camera time, which surprises me. Because the movement triggering time including date is indicated. If you need more information, just get in touch. ![IMG_9532](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/e/9ed589e8a6980447a6e6e8701eb7f05050857c26.jpeg) ![IMG_9533](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/0/304783bfe796bb64373db125997ac76a2eb496e0.jpeg) ---
**Author:** ![Stafsberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stafsberg/32/113077_2.png) [@Stafsberg](https://community.homey.app/u/Stafsberg)\ **Post date:** [October 5, 2024, 6:23am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1516 "2024-10-05T06:23:50Z")
Hello, great app! Im having some issues. Im using a Tapo c310 camera, do you know if anyone have had any luck getting snapshots into the app? Currently it’s detecting motion and giving me notifications about that. The camera uses ONVIF S, so I think it should be possible to get snapshots, but I’m running into issues. The URL I use is: [http://xxx.xxx.x.xxx:2020/onvif/device\_service](http://xxx.xxx.x.xxx:2020/onvif/device_service) (The app didn’t get any URL from the camera, but found this on a guide for link to use with ispy) Channel: -1, ive tried to change this so several other things but no luck ![IMG_0257](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/1/a15b721e0d0b86845e18e837f3d6bf96147dcbeb.png) ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [October 5, 2024, 8:04am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1517 "2024-10-05T08:04:18Z")
> [@Asterix](#): > > except the camera time, which surprises me. Because the movement triggering time including date is indicated. The movement date uses Homey’s time but it’s strange that the camera time is not showing. Maybe you could open the app settings page and select the Diagnostic log tab, then set the log level to Detailed Information. Then restart the app and once it has finished starting up, go to the app setting page and send the log. > [@Stafsberg](#): > > Im using a Tapo c310 camera, do you know if anyone have had any luck getting snapshots I have never found a way to get an image from my Tapo camera, so I don’t think that’s possible. ---
**Author:** ![Asterix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/asterix/32/45768_2.png) [@Asterix](https://community.homey.app/u/Asterix)\ **Post date:** [October 6, 2024, 2:54am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1518 "2024-10-06T02:54:18Z")
Hello Adrian I just sent you the log files. Thank you for your efforts. And one more thing, the app is great 👌 👏 ---
**Author:** ![Cuprani](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cuprani/32/3575_2.png) [@Cuprani](https://community.homey.app/u/Cuprani)\ **Post date:** [October 6, 2024, 9:43pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1519 "2024-10-06T21:43:34Z")
I tried to add a Reolink doorbell camera, but I keep getting ECONNREFUSED error after adding the camera. In the settings I activated RTSP and ONVIF @ port 8000. When searching for a device the camera is immediately visible. After entering the right login, password and port (8000) I can just connect, and it is adding the device in Homey. But after that I just cannot load any image or status details. As soon as I open the details of the device I receive the ECONNREFUSED- error. When opening the LOG file I see multiple errors, but all with the same reason: connect ECONNREFUSED. What can I change to fix this issue? ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [October 6, 2024, 10:55pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1520 "2024-10-06T22:55:53Z")
Make sure http is enabled. ---
**Author:** ![StaX](https://avatars.discourse-cdn.com/v4/letter/s/7ba0ec/32.png) [@StaX](https://community.homey.app/u/StaX)\ **Post date:** [October 7, 2024, 10:25am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1521 "2024-10-07T10:25:52Z")
- Never mind - Solved! ---
**Author:** ![Asterix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/asterix/32/45768_2.png) [@Asterix](https://community.homey.app/u/Asterix)\ **Post date:** [October 15, 2024, 8:06am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1522 "2024-10-15T08:06:54Z")
> [@Asterix](#): > > Hello Adrian > > I just sent you the log files. Did you find out something? ---
**Author:** ![BertusX](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bertusx/32/79590_2.png) [@BertusX](https://community.homey.app/u/BertusX)\ **Post date:** [October 16, 2024, 6:58am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1523 "2024-10-16T06:58:16Z")
Hi Adrian, Reolink Duo 2 Wifi, working and connected through your app. I want to switch on the garden lights when de camera detects movement. So far, the “Motion was detected” triggers multiple times upon each movement. See settings below. What am I doing wrong? ![Schermafbeelding 2024-10-16 084500](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/8/783379828171909572fc22151f98fd55e23d4e89.png) ![Schermafbeelding 2024-10-16 084533](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/6/d6d3c19a3a5fd5367521b4b69506cfa44d6290a9.png) [Previous page](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377.md?page=74) [Next page](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377.md?page=76)