# \[APP\]\[Pro\] Support for ONVIF compatible cameras (Release 2.0.70, Test 2.0.70) **URL:** \ **Category:** Apps\ **Created:** [April 14, 2020, 4:57pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377 "2020-04-14T16:57:37Z")\ **Posts on this page:** 20\ **Page:** 70
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [April 19, 2024, 12:10pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1396 "2024-04-19T12:10:08Z")
Strange, if it detected the camera, you shouldn’t need to enter the IP or port as that should have been picked up. The ONVIF port certainly won’t be the same as the RTSP port. Also, a lot of cameras have several ONVIF username and password configuration to the normal connection. ---
**Author:** ![Niklas70](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niklas70/32/136814_2.png) [@Niklas70](https://community.homey.app/u/Niklas70)\ **Post date:** [April 19, 2024, 2:19pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1397 "2024-04-19T14:19:05Z")
You know what, I got it working! I changed the settings on the camera from ONVIF Authentication: Enabled to Disabled. And then I didn’t enter any PORT number at all in the box, it was empty from the beginning, so I left it empty. Then it worked! ---
**Author:** ![anthonycam](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/anthonycam/32/79166_2.png) [@anthonycam](https://community.homey.app/u/anthonycam)\ **Post date:** [May 5, 2024, 7:24pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1398 "2024-05-05T19:24:41Z")
How were you able to get the firmware? Do you know which version it is? I am not getting ONVIF events for AI Detection on my RLC-510-WA but I am having trouble getting the beta version out of Reolink. Thanks! ---
**Author:** ![To\_Lou](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/to_lou/32/79159_2.png) [@To\_Lou](https://community.homey.app/u/To_Lou)\ **Post date:** [May 5, 2024, 7:28pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1399 "2024-05-05T19:28:31Z")
I got v3.1.0.2109\_23051513 via link on email. ---
**Author:** ![boldor](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/boldor/32/101931_2.png) [@boldor](https://community.homey.app/u/boldor)\ **Post date:** [May 20, 2024, 5:32pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1400 "2024-05-20T17:32:20Z")
I have downloaded the Onvif app and successfully added this camera: AXIS M2026-LE Mk II Network Camera. It seems that motion detection on this camera is not working with this Onvif app. I see that there are also many settings. Is there a step-by-step guide to ensure that motion detection is not working, or to make it work? ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [May 20, 2024, 7:08pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1401 "2024-05-20T19:08:03Z")
Can you enable the the Diagnostics log in the app settings ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/a/2aa7d98b2c55f2b6845779fc872823722813da25.png) Then trigger motion on the camera and see what is logged. You can send the log if you want me to analyse it. ---
**Author:** ![boldor](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/boldor/32/101931_2.png) [@boldor](https://community.homey.app/u/boldor)\ **Post date:** [May 21, 2024, 6:50am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1402 "2024-05-21T06:50:02Z")
i have sent it to you. thanks ---
**Author:** ![Svein\_Fossaen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/svein_fossaen/32/32464_2.png) [@Svein\_Fossaen](https://community.homey.app/u/Svein_Fossaen)\ **Post date:** [May 22, 2024, 8:00am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1403 "2024-05-22T08:00:22Z")
After a lot of debugging, factory resets etc, it seems like I’ve solved my problem with multiple push notifications on person/vehicle detections using onvif. I saw when person/vehicle alarm was triggered, an “general” motion detection alarm was also triggering at the same time. Adding an IF statement and check “motion alarm” was not triggered, eliminated the dual notifications… Case closed 🙂 ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [May 24, 2024, 2:46pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1404 "2024-05-24T14:46:11Z")
Hi Adrian, Pro 2019 App v2.0.48 I noticed the app was paused or frozen in some way. It happened several times. I’ve no info yet on how many times in how many hours. Here’s the diag _after_ app disable & enable: 9646126f-4248-4069-bd6c-069939db3632 While I could not send it in frozen state: > ![Screenshot_20240524-163609_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/6/26e721868da08257bb198312b284d44c63b29473.jpeg) I also sent you the detailed log, with peter\_kawa as sendername. Tia, and no hurries! ---
**Author:** ![Felix\_Horn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/felix_horn/32/79359_2.png) [@Felix\_Horn](https://community.homey.app/u/Felix_Horn)\ **Post date:** [June 4, 2024, 10:08am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1405 "2024-06-04T10:08:28Z")
Hello, I have a Reolink NVR " RNL8-410 " And a couple of Reolink " RLC-810A ". I can connect them with the Onvif app, and get snapshots from the cameras without problems. but I don’t get any motion detection from the cameras. I have activated the “Motion detection” button for the camera. and it turns white and green. On the last page like a timeline, there it just says " Tamper Alarm Disabled XX Minutes Ago by ONVIF Camera " And " Motion alarm disabled XX Minutes ago by ONVIF Camera " Am I doing something wrong here that I’m missing? Thanks in advance ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [June 4, 2024, 11:47am UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1406 "2024-06-04T11:47:56Z")
Can you open the app settings page, select the Diagnostics Log tab and set the Log Level to Detailed information. Then trigger motion on the camera and it should appear in the Log output. If it does, tap on Send Log and I will check the type of event. If it doesn’t then restart the app and once it has finished starting, send the log. ---
**Author:** ![Felix\_Horn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/felix_horn/32/79359_2.png) [@Felix\_Horn](https://community.homey.app/u/Felix_Horn)\ **Post date:** [June 4, 2024, 12:54pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1407 "2024-06-04T12:54:43Z")
The log has been sent 🙂 Thanks for looking at it. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [June 4, 2024, 5:31pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1408 "2024-06-04T17:31:03Z")
For some reason it is failing to register push events. Could you try changing to pull events in the device advanced settings. ---
**Author:** ![Felix\_Horn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/felix_horn/32/79359_2.png) [@Felix\_Horn](https://community.homey.app/u/Felix_Horn)\ **Post date:** [June 4, 2024, 8:28pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1409 "2024-06-04T20:28:26Z")
I cant change it from " push and pull supported : using push " seems like that’s the only choice i have in notification method 😬 ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [June 4, 2024, 8:52pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1410 "2024-06-04T20:52:43Z")
The setting is Prefer Pull Events: ![1000007240](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/e/8e18268b4b830ca6e85c2171bb503a4044032c12.jpeg) Set that on to use Pull events. ---
**Author:** ![Felix\_Horn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/felix_horn/32/79359_2.png) [@Felix\_Horn](https://community.homey.app/u/Felix_Horn)\ **Post date:** [June 4, 2024, 9:42pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1411 "2024-06-04T21:42:44Z")
I will try that! I will give you an update when im home again 😁 thanks! ---
**Author:** ![Felix\_Horn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/felix_horn/32/79359_2.png) [@Felix\_Horn](https://community.homey.app/u/Felix_Horn)\ **Post date:** [June 9, 2024, 6:40pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1412 "2024-06-09T18:40:14Z")
Hello Adrian! That seems to have done the trick! Not super reliable, but it gives a motion detection notification, thanks alot 🤟 ---
**Author:** ![Frank\_Munter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frank_munter/32/78911_2.png) [@Frank\_Munter](https://community.homey.app/u/Frank_Munter)\ **Post date:** [June 13, 2024, 3:45pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1413 "2024-06-13T15:45:55Z")
So the program finds the Camera with onvif app, the login doesnt work because of username and password. Does someone know, wich username and Password will work though there are none while connecting the device with the Tapo App? ---
**Author:** ![Jethro\_De\_Rooij](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jethro_de_rooij/32/79290_2.png) [@Jethro\_De\_Rooij](https://community.homey.app/u/Jethro_De_Rooij)\ **Post date:** [June 21, 2024, 7:50pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1415 "2024-06-21T19:50:16Z")
Hi would this work with door intercom Dahua DH VTO 2211G P? It has snapshot url, onvif but i don’t get alarms or notifications within Homey. Kind regards Jethro ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [June 21, 2024, 7:59pm UTC](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377/1416 "2024-06-21T19:59:13Z")
I presume you have the doorbell added to Homey with ONVIF, so could you set the diagnostics log option to Detailed Information, restart the app and once it has finished starting, send the log. I will check what is reported. [Previous page](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377.md?page=69) [Next page](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-70-test-2-0-70/28377.md?page=71)