[APP][Pro] Support for ONVIF compatible cameras (2.0.8 & test 2.0.9)

Unfortunately, the new log has no useful information.
In you previous log I could see the MOTIONALRM events and others were coming in:

12:36:47.180: Event data: (192.168.31.208) Device/Trigger/DigitalInput: LogicalState = true
12:36:47.211: Ignoring event type (192.168.31.208) Device/Trigger/DigitalInput: LogicalState = true

12:36:47.326: Event data: (192.168.31.208) VideoSource/MotionAlarm: State = true
12:36:47.354: Ignoring event type (192.168.31.208) VideoSource/MotionAlarm: State = true

12:36:47.477: Event data: (192.168.31.208) RuleEngine/CellMotionDetector/Motion: State = true
12:36:47.504: Ignoring event type (192.168.31.208) RuleEngine/CellMotionDetector/Motion: State = true

The firs two were ignored as the option must have been set to something else. The third one ‘MOTION’ is returning ‘State = true’, but the app would expect ‘IsMotion = true’. So your camera is not conforming to the standard for MOTION. However it is conforming to both ‘MotionAlarm State = true’ and ‘DigitalInput LogicalState = true’, so either of those option should work.

I presume you has turned motion detection back on and walked in front of the camera during the second log?

Hi, I tried several combination but no success : ) . Previously it was matter to add camera and that’s all. I have two cameras with the same result. Can you please share with me the archive, so I can test old ver. ? Thanks for your support.

Any tips how I can install old version ? I don’t know how to execute zip file inside homey storage .

You need to install the app via the CLI.
Instructions are in the developer help https://apps.developer.homey.app/

Could you select the DigitalInput option, enable motion detection, then trigger the camera and send the log again.

Done, log file was sent.

Sorry, the log has captured the startup but not any motion events.
Could you clear the log, then turn on motion detection, move about in front of the camera and then send the log. Unfortunately the log size is limited so it doesn’t consume too much memory, so it can be awkward to capture the right data.

Ok, got the new log and it shows the motion has been detected:
‘Device/Trigger/DigitalInput: LogicalState = true
19:33:4.254: Event Trigger (192.168.31.205):LogicalState = true
19:33:4.271: Updating Motion Image in 0.5seconds’

HI Adrian, logs were sent yesterday.

Odesláno z mého zařízení Galaxy

-------- Původní zpráva --------
Od: Adrian Rockall via Homey Community Forum notifications@athom.discoursemail.com
Komu: petr.stusek@seznam.cz
Předmět: [Homey Community Forum] [Apps] [APP][Pro] Support for ONVIF compatible cameras (2.0.8 & test 2.0.9)

| Adrian_Rockall
September 22 |

  • | - |

Sorry, the log has captured the startup but not any motion events.
Could you clear the log, then turn on motion detection, move about in front of the camera and then send the log. Unfortunately the log size is limited so it doesn’t consume too much memory, so it can be awkward to capture the right data.