# \[APP\]\[Pro\] SONOFF Zigbee **URL:** \ **Category:** Apps\ **Tags:** app, zigbee, devices\ **Created:** [October 23, 2020, 9:43pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418 "2020-10-23T21:43:09Z")\ **Posts on this page:** 20\ **Page:** 18
**Author:** ![Boechie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/boechie/32/29808_2.png) [@Boechie](https://community.homey.app/u/Boechie)\ **Post date:** [May 15, 2024, 4:22pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/353 "2024-05-15T16:22:20Z")
Repair only works in HP2023, not in HP2019 and before. In that case you’re unlucky… ---
**Author:** ![Marcus\_Bitterling](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcus_bitterling/32/80103_2.png) [@Marcus\_Bitterling](https://community.homey.app/u/Marcus_Bitterling)\ **Post date:** [June 11, 2024, 3:50pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/354 "2024-06-11T15:50:09Z")
Hello, I’m trying to add the Micro USB Smart Adapter [https://sonoff.tech/product/diy-smart-switches/micro/](https://sonoff.tech/product/diy-smart-switches/micro/) I’m trying to add it as eWelink on/off device because normally it should be added through this app. Unfortunately Homey doesn’t recognise it. Is it supported? ---
**Author:** ![johan\_bendz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_bendz/32/10344_2.png) [@johan\_bendz](https://community.homey.app/u/johan_bendz)\ **Post date:** [June 11, 2024, 6:59pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/355 "2024-06-11T18:59:33Z")
> [@Marcus\_Bitterling](#): > > I’m trying to add the Micro USB Smart Adapter > > [SONOFF Micro USB Smart Adaptor - remotely control USB Devices](https://sonoff.tech/product/diy-smart-switches/micro/) > > I’m trying to add it as eWelink on/off device because normally it should be added through this app. Unfortunately Homey doesn’t recognise it. @Marcus_Bitterling, is this not a WiFi device? ---
**Author:** ![Marcus\_Bitterling](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcus_bitterling/32/80103_2.png) [@Marcus\_Bitterling](https://community.homey.app/u/Marcus_Bitterling)\ **Post date:** [June 11, 2024, 7:04pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/356 "2024-06-11T19:04:04Z")
Hi Johan, You’re probably right! So I need to find a suitable Homey app. Perhaps it’s tuya compatible. Thanks for your help. ---
**Author:** ![Rick\_znd](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rick_znd/32/79245_2.png) [@Rick\_znd](https://community.homey.app/u/Rick_znd)\ **Post date:** [June 15, 2024, 4:47pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/357 "2024-06-15T16:47:02Z")
This version is wifi. I’m looking for a solution too to adopt The zigbee version ---
**Author:** ![Yustmenl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/yustmenl/32/10659_2.png) [@Yustmenl](https://community.homey.app/u/Yustmenl)\ **Post date:** [August 4, 2024, 7:04pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/358 "2024-08-04T19:04:17Z")
Is the mmWave sensor planned for the app? > **[SNZB-06P - SONOFF Official](https://sonoff.tech/product/gateway-and-sensors/snzb-06p/)** > > SNZB-06P is a Zigbee Human Presence Sensor that can detect movement or stationary person. It automatically turns on the lights when you approach and keeps the lights on until you leave. The built-in light detector ensures that the lights are only... Maybe a Nice alternative for the Aqara sensor. ---
**Author:** ![Yestond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/yestond/32/9807_2.png) [@Yestond](https://community.homey.app/u/Yestond)\ **Post date:** [August 5, 2024, 10:50am UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/359 "2024-08-05T10:50:05Z")
@Yustmenl It is supported in this app: > **[Sonoff](https://homey.app/en-dk/app/se.styrahem.sonoff.zigbee/Sonoff/)** > > Brings Your Home To Life ---
**Author:** ![edbe](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edbe/32/79104_2.png) [@edbe](https://community.homey.app/u/edbe)\ **Post date:** [August 13, 2024, 1:08pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/360 "2024-08-13T13:08:46Z")
no support available? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/a/bad07a461b5695d8308053a98c44d5799bce220f.jpeg) ---
**Author:** ![Nisse\_Hellgren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nisse_hellgren/32/86036_2.png) [@Nisse\_Hellgren](https://community.homey.app/u/Nisse_Hellgren)\ **Post date:** [August 15, 2024, 11:07am UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/361 "2024-08-15T11:07:50Z")
I have got a problem adding new Sonoff devices. Earlier I had 4 SNZB-02 Temp/humidity sensors and 1 SNZB-02D Temp/humidity sensor added to my HP23. Then I bought 3 SNZB-02P devices. I could add 1 of these, but when I tried pairing and adding the second and third, they were timed out. I restarted the app and Homey but I was not able to add. Then I removed the first one and tried to readd it, but that was not possible, I also removed the SNZB-02D and was not able to readd this one either. I removed av Aqara temp/hum sensor and could succesfully readd it. I added a new Aeotec extender which was also succesfully connected. In my system I have 26 zigbee router devices and 25 zigbee enddevices so I thought they would take care of the connections, but they did not. Unfortunately I do not know how to see the connections between enddevices and routers like it is for z-wave devices. I have tried all kinds of alternatives, that is to my knowledge, and can not figure out what is the problem. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [August 15, 2024, 4:53pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/362 "2024-08-15T16:53:43Z")
@Nisse_Hellgren Do you use Matter over Thread devices as well? If yes, consider making choices: zigbee & Matter over WiFi, or just zigbee, or just Matter over Thread… > [@Unable to pair Nanoleaf Matter Essentials A19 bulbs](https://community.homey.app/t/unable-to-pair-nanoleaf-matter-essentials-a19-bulbs/113816/14): > > Zigbee and Thread are handled by the same chip inside Homey. Others that use the same chip (like the SkyConnect dongle from Home Assistant) advice against using both protocols on the same chip at the same time, due to instability issues. ---
**Author:** ![Nisse\_Hellgren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nisse_hellgren/32/86036_2.png) [@Nisse\_Hellgren](https://community.homey.app/u/Nisse_Hellgren)\ **Post date:** [August 16, 2024, 9:23am UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/363 "2024-08-16T09:23:45Z")
I just use Zigbee and Z-wave devices in my HP23 system. WiFi devices were to unstable and slow in HP23 so I chose another solution for these - mostly cameras and other devices. Some of these devices only work on 2.4 GHz but as I understand it Zigbee channel 11 and WiFi 2.4 GHz communication should not interfere so they block each other - or? ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [August 16, 2024, 2:17pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/364 "2024-08-16T14:17:53Z")
Fix Wifi 2.4GHz channel preferably to ch. 1, 6 or 11 When set to ch. 1, zigbee channel should be 16 or up. When set to ch. 11, zigbee channel should be 20 or down, you get the picture. > ![Screenshot_20210413-165254_Chrome~01](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/9/29f6698638a638a6c12d8e2167f46b2960c6e466.jpeg) Note: your close neighbour’s 2.4GHz wifi can interfere as well! You can check this with a tool like this [https://play.google.com/store/apps/details?id=abdelrahman.wifianalyzerpro](https://play.google.com/store/apps/details?id=abdelrahman.wifianalyzerpro) ---
**Author:** ![Nisse\_Hellgren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nisse_hellgren/32/86036_2.png) [@Nisse\_Hellgren](https://community.homey.app/u/Nisse_Hellgren)\ **Post date:** [August 16, 2024, 3:55pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/365 "2024-08-16T15:55:26Z")
For those devices only running on wifi 2.4 GHz the channel is set to 11. Zigbee is set to channel 11 meaning that wifi and zigbee are on each side of the 2.4 GHz frequency range. Which can be clearly noticed in the graph - at least as I read it. But now I have to inform that I successfully added all Sonoff temperature/humidity sensors to Smartthing Hub after resetting the sonoff devices. This measure was NOT successful in the case of HP23. So still I wonder what went wrong with HP23? ---
**Author:** ![ThomasJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thomasj/32/111608_2.png) [@ThomasJ](https://community.homey.app/u/ThomasJ)\ **Post date:** [August 20, 2024, 7:26pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/366 "2024-08-20T19:26:09Z")
Anyone know when SONOFF Zigbee Door/Window Sensor SNZB-04P and SONOFF Zigbee Motion Sensor SNZB-03P will be supported? ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [August 21, 2024, 5:00am UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/367 "2024-08-21T05:00:33Z")
> [@Nisse\_Hellgren](#): > > So still I wonder what went wrong with HP23? Homey’s Zigbee just isn’t great. ---
**Author:** ![Nisse\_Hellgren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nisse_hellgren/32/86036_2.png) [@Nisse\_Hellgren](https://community.homey.app/u/Nisse_Hellgren)\ **Post date:** [August 22, 2024, 8:33am UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/369 "2024-08-22T08:33:20Z")
Yes, you´re right. Probably I expected to much of HP23. Fortunately I could use my Smartthings hub where all my cameras goes as well. These couldn’t be handle of HP23 anyway. Now I wondwer if building up a Home Assistent system would be a better idea? ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [August 22, 2024, 9:17am UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/370 "2024-08-22T09:17:48Z")
> [@Nisse\_Hellgren](#): > > Now I wondwer if building up a Home Assistent system would be a better idea? Home Assistant only has more complete Zigbee support, support for streaming video (cameras), better/faster device support, customisable dashboards, the ability to run on your own hardware, debug logging, free and easy local backups, and no cloud dependencies. Other than that, Homey is better. ---
**Author:** ![Nisse\_Hellgren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nisse_hellgren/32/86036_2.png) [@Nisse\_Hellgren](https://community.homey.app/u/Nisse_Hellgren)\ **Post date:** [August 22, 2024, 9:43am UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/371 "2024-08-22T09:43:37Z")
Thanks a lot. While looking carefully to see if I can find all the benefits of working with HP23, I think I will try out Home Assistent. ---
**Author:** ![JvdMeulen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jvdmeulen/32/71049_2.png) [@JvdMeulen](https://community.homey.app/u/JvdMeulen)\ **Post date:** [September 7, 2024, 2:55pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/372 "2024-09-07T14:55:06Z")
> [@robertklep](#): > > Home Assistant only has more complete Zigbee support Is zigbee2mqtt not enough? Or can’t you run that without HA? ---
**Author:** ![JvdMeulen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jvdmeulen/32/71049_2.png) [@JvdMeulen](https://community.homey.app/u/JvdMeulen)\ **Post date:** [September 7, 2024, 2:58pm UTC](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/373 "2024-09-07T14:58:13Z")
I hope very soon, but i’m affraid Johan is very busy atm [Previous page](https://community.homey.app/t/app-pro-sonoff-zigbee/36418.md?page=17) [Next page](https://community.homey.app/t/app-pro-sonoff-zigbee/36418.md?page=19)