# \[APP\]\[Pro\] SolarEdge + Growatt TCP modbus **URL:** \ **Category:** Apps\ **Tags:** app, pv-solar\ **Created:** [March 30, 2021, 10:17am UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487 "2021-03-30T10:17:23Z")\ **Posts on this page:** 20\ **Page:** 73
**Author:** ![KungWaz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kungwaz/32/56612_2.png) [@KungWaz](https://community.homey.app/u/KungWaz)\ **Post date:** [May 9, 2025, 6:34pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1455 "2025-05-09T18:34:46Z")
Ok, so is that also the reason there is only becomes greater than or less than cards? Feels like a “changed” card would be better since you can use the built in logic cards to check if the value becomes higher or lower than a given value when it changes. Will have a look to see if I can find any info regarding the modbus doc and what is available. ---
**Author:** ![Edwin\_Biemond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_biemond/32/72686_2.png) [@Edwin\_Biemond](https://community.homey.app/u/Edwin_Biemond)\ **Post date:** [May 9, 2025, 7:36pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1456 "2025-05-09T19:36:05Z")
are you not seeing “The solar power changed” change trigger? and “Total Yield changed” I guess you can calculate this . or I can do this and reset this value at midnight like I do for solaredge ---
**Author:** ![KungWaz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kungwaz/32/56612_2.png) [@KungWaz](https://community.homey.app/u/KungWaz)\ **Post date:** [May 9, 2025, 8:01pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1457 "2025-05-09T20:01:30Z")
Nope, I only see a lot of becomes greater or less than. Would rather trade all of them to changed cards. Only one changed at the bottom of the list for the battery level. ![SolarEdge + Growatt TCP modbus app version](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/d/0de182e68bc63625bdd64b587db60e2b2f21e872.png) ![Sigenergy when cards 01](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/4/64865772a6aff248dbc2529ebc60b08ac1ee0263.png) ![Sigenergy when cards 02](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/0/008e25225c2318f9c77bf53a46ebfa0e26d0c6d9.png) ![Sigenergy when cards 03](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/c/5cd1107bf6795abc8285790024c82da3e0d229d1.png) ![Sigenergy when cards 04](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/4/c4bfbf7da788fea3f34ce53ccbc9aa19cee71d74.png) ---
**Author:** ![KungWaz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kungwaz/32/56612_2.png) [@KungWaz](https://community.homey.app/u/KungWaz)\ **Post date:** [May 10, 2025, 4:53am UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1458 "2025-05-10T04:53:03Z")
Replying myself here, found some info in [this thread](https://community.home-assistant.io/t/sig-energy-system-integration/760448/76) over at the HA community. Seems that Sigenergy is working on something, but I guess time will tell unless I get a response from them. ---
**Author:** ![Willem\_Jan\_Bakker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_jan_bakker/32/8153_2.png) [@Willem\_Jan\_Bakker](https://community.homey.app/u/Willem_Jan_Bakker)\ **Post date:** [May 11, 2025, 9:09am UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1459 "2025-05-11T09:09:07Z")
Since yesterday i have some strange behaviour on my Solaredge intervers. I have a flow which changes the Export limit to 0 if the timber price is below 0, and back to 17250 if it is above 0 again. Since yesterday the Active Power Limit is also set, and on 100%.. so now only the battery is charged and no more export. tried to change is back to 0 with a flow, but it automatically changes back.. I’m not sure but have the idea that this is since the latest update.. Experimental 3.0.196 By the way, doe anyone know if i should set the power Control on RRCR or CosPhi? ---
**Author:** ![Ria\_Banis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ria_banis/32/7966_2.png) [@Ria\_Banis](https://community.homey.app/u/Ria_Banis)\ **Post date:** [May 11, 2025, 9:13am UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1460 "2025-05-11T09:13:55Z")
I have this flow but solar panels did not stop: > **[Shared Flow | Homey](https://homey.app/en-us/flow/7xzD_q/)** ![IMG_8846](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/d/9ddbb176327ae53b016424a79fa056feb28c90ba.png) The SolarEdge app itself stopped the panels to soon and now not at all. ---
**Author:** ![Edwin\_Biemond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_biemond/32/72686_2.png) [@Edwin\_Biemond](https://community.homey.app/u/Edwin_Biemond)\ **Post date:** [May 11, 2025, 10:12am UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1461 "2025-05-11T10:12:56Z")
need to test it but I think export or production limit changes the active limit all the time to honor the export value. this is done by the inverter there is no change on solaredge for a few years. I think active limit was the last change. so what do you want to achieve here. no export but still charging to the max? and back to the default. ( disable limit mode and max self consumption should be ok for that ) ---
**Author:** ![Edwin\_Biemond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_biemond/32/72686_2.png) [@Edwin\_Biemond](https://community.homey.app/u/Edwin_Biemond)\ **Post date:** [May 11, 2025, 10:14am UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1462 "2025-05-11T10:14:05Z")
I believe you cannot do both , handle by solaredge and by you. solaredge will revert your changes. ---
**Author:** ![Bulletcather](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bulletcather/32/13738_2.png) [@Bulletcather](https://community.homey.app/u/Bulletcather)\ **Post date:** [May 11, 2025, 10:36am UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1463 "2025-05-11T10:36:18Z")
Indeed, it seems that the following function no longer works. active power limited to 0 ---
**Author:** ![Edwin\_Biemond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_biemond/32/72686_2.png) [@Edwin\_Biemond](https://community.homey.app/u/Edwin_Biemond)\ **Post date:** [May 11, 2025, 11:29am UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1464 "2025-05-11T11:29:20Z")
does this work for you [[APP][Pro] SolarEdge + Growatt TCP modbus - #1450 by Jelmertje](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1450) ---
**Author:** ![Willem\_Jan\_Bakker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_jan_bakker/32/8153_2.png) [@Willem\_Jan\_Bakker](https://community.homey.app/u/Willem_Jan_Bakker)\ **Post date:** [May 11, 2025, 12:03pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1465 "2025-05-11T12:03:50Z")
![Scherm­afbeelding 2025-05-11 om 13.58.44](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/1/1127420c53d2b2feac5e3676cafca647b856d8b6.png) The idea was when i set export to 0 that all the power used AND battery charge is done bij solar. but as you can see on the pictures only the battery is charged, and the power use is taken from the net.. I have let Solaredge set my firmware back to 4.17.46 because the newer firmware’s don’t work with homey anymore. ---
**Author:** ![Bulletcather](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bulletcather/32/13738_2.png) [@Bulletcather](https://community.homey.app/u/Bulletcather)\ **Post date:** [May 11, 2025, 1:01pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1466 "2025-05-11T13:01:27Z")
Where can i find the power control menu? ---
**Author:** ![Willem\_Jan\_Bakker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_jan_bakker/32/8153_2.png) [@Willem\_Jan\_Bakker](https://community.homey.app/u/Willem_Jan_Bakker)\ **Post date:** [May 11, 2025, 2:24pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1467 "2025-05-11T14:24:54Z")
With Solaredge Go Remote acces to you inverter.. ---
**Author:** ![Bulletcather](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bulletcather/32/13738_2.png) [@Bulletcather](https://community.homey.app/u/Bulletcather)\ **Post date:** [May 11, 2025, 2:43pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1468 "2025-05-11T14:43:52Z")
I can not use this app. This is only for professionals ---
**Author:** ![Willem\_Jan\_Bakker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_jan_bakker/32/8153_2.png) [@Willem\_Jan\_Bakker](https://community.homey.app/u/Willem_Jan_Bakker)\ **Post date:** [May 11, 2025, 2:50pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1469 "2025-05-11T14:50:11Z")
Then the setapp and connect direct to the inverter. (scan the QR on the side of the inverter) ---
**Author:** ![Bulletcather](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bulletcather/32/13738_2.png) [@Bulletcather](https://community.homey.app/u/Bulletcather)\ **Post date:** [May 11, 2025, 3:17pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1470 "2025-05-11T15:17:58Z")
I have interveter with screen. Qrcode does not work ---
**Author:** ![Edwin\_Biemond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_biemond/32/72686_2.png) [@Edwin\_Biemond](https://community.homey.app/u/Edwin_Biemond)\ **Post date:** [May 11, 2025, 3:19pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1471 "2025-05-11T15:19:30Z")
let me check it also, got latest firmware with 2 inverters and 2 batteries. I expect set export limit to 0 and max self consumption should work. ( or maybe set charging to 1500w with remote control and a fixed charging). ---
**Author:** ![Edwin\_Biemond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_biemond/32/72686_2.png) [@Edwin\_Biemond](https://community.homey.app/u/Edwin_Biemond)\ **Post date:** [May 11, 2025, 3:20pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1472 "2025-05-11T15:20:30Z")
can you check this [https://knowledge-center.solaredge.com/sites/kc/files/application\_note\_power\_control\_configuration.pdf](https://knowledge-center.solaredge.com/sites/kc/files/application_note_power_control_configuration.pdf) or 1st post > [@\[APP\]\[Pro\] SolarEdge + Growatt TCP modbus](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487): > > Purpose The difference of this app and the already existing solar panels app is that this app reads the data directly from the inverter. The solaredge api and others are mostly limited to 300 calls/ day, so you get only updates every 10-15 minutes. The modbus app receives data every few seconds. If you have the Solaredge energy monitor installed you can maximize your self-consumption and limit your exported power by using it. You can make flows based on your generated solar power, exported p… ---
**Author:** ![Bulletcather](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bulletcather/32/13738_2.png) [@Bulletcather](https://community.homey.app/u/Bulletcather)\ **Post date:** [May 11, 2025, 3:32pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1473 "2025-05-11T15:32:04Z")
thanks for the information. i have been using the app for years to my satisfaction. the function has also worked in the past but not anymore. i do not know since when it stopped working because i have not used the function for a year of 2 ---
**Author:** ![Edwin\_Biemond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_biemond/32/72686_2.png) [@Edwin\_Biemond](https://community.homey.app/u/Edwin_Biemond)\ **Post date:** [May 11, 2025, 3:36pm UTC](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487/1474 "2025-05-11T15:36:50Z")
I think it has something to do with the new dynamic prices app feature plus new firmware upgrade. else disable that part in the app and make a solaredge support call to fix it from their side. if default values on power control does not work. [Previous page](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487.md?page=72) [Next page](https://community.homey.app/t/app-pro-solaredge-growatt-tcp-modbus/45487.md?page=74)