# \[APP\]\[Pro\] Sigenergy - Home energy powered by AI **URL:** \ **Category:** Apps\ **Tags:** app, energy, homey-pro, pv-solar\ **Created:** [October 10, 2025, 8:54am UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965 "2025-10-10T08:54:19Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [November 10, 2025, 5:57pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/21 "2025-11-10T17:57:54Z")
> [@Hass](#): > > Would it be possible to add an option to display the EV charger or not, and have the garage closed if no charger exists? I use a third party wallbox (Zaptec) so it will always be 0 usage and a bit confusing for family members when our car is actually charging. I have made a mental note, and will think of how to implement something > [@elflord](#): > > I have been able to add the inverter but I cannot find the IP addresses for the batteries to be able to add those Yes, the SigenStor stack has a single IP address. It is also stated in the first post of this thread. > [@Pieter\_S](#): > > My installer did eneble the Modbus TCP, so what does below means? What should I do? Have you followed the guide that is displayed in the app when you are about to add a device? It states pretty clearly what is required to add a device. > [@Gerben\_Plantinga](#): > > how can I get rid of the empty battery notifications? I believe you need to address this with Homey. For a home battery, which the battery device is classified as, perhaps they should exclude the default battery notification logic? ---
**Author:** ![Pieter\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pieter_s/32/120806_2.png) [@Pieter\_S](https://community.homey.app/u/Pieter_S)\ **Post date:** [November 11, 2025, 7:45pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/22 "2025-11-11T19:45:15Z")
> [@Richard\_B](#): > > Have you followed the guide that is displayed in the app when you are about to add a device? It states pretty clearly what is required to add a device. Hi Richard, I followed the guide exactly but then it shows this error message. But I will double check with my installer if they really enabled the modbus TCP as they said. ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [November 12, 2025, 7:42am UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/23 "2025-11-12T07:42:30Z")
Yeah, strangely enough, it is not possible to see if Modbus is enabled as a normal user. We can find SigenStor’s IP address, though. Furthermore, ensure that your Homey can communicate with your SigenStor within your local network. Sometimes, users are unaware that the communication occurs over the local network. If you have segmented networks and your Homey is on a different network from the Sigen devices, this will not work. ---
**Author:** ![qawsedrf57](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/qawsedrf57/32/123371_2.png) [@qawsedrf57](https://community.homey.app/u/qawsedrf57)\ **Post date:** [November 12, 2025, 6:04pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/24 "2025-11-12T18:04:46Z")
My sigenenergy battery is placed today, i also think my modbus is not active yet. How can the guy who did the instalation open the modbus port? ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 13, 2025, 4:11pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/25 "2025-11-13T16:11:52Z")
> [@qawsedrf57](#): > > How can the guy who did the instalation open the modbus port? That’s what you hired him for? He should know imho. ---
**Author:** ![qawsedrf57](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/qawsedrf57/32/123371_2.png) [@qawsedrf57](https://community.homey.app/u/qawsedrf57)\ **Post date:** [November 15, 2025, 8:47pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/26 "2025-11-15T20:47:59Z")
I got the battery added to my homey, thanks so far. A quick question, is it posible to use the baterry as a sort of p1 device to monitor my usage? In the sigenergy app from the device self i get a nice graph of my flows of the energy i wan’t to have something like that on my dashboard if posible. Ore do i need to run a calculation in a flow to feed a virtual device so i can get the insight from that device? ---
**Author:** ![qawsedrf57](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/qawsedrf57/32/123371_2.png) [@qawsedrf57](https://community.homey.app/u/qawsedrf57)\ **Post date:** [November 16, 2025, 8:02pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/27 "2025-11-16T20:02:14Z")
I i try to place a widget on a dashboard it say’s i need a plant device, i do have a batery the sigenstor. What us the diference with a plant device? ![Screenshot_20251116_210030_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/1/114e648646184c5b034cd564aad0cf2b6aa3e9cf.jpeg) ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [November 16, 2025, 9:16pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/28 "2025-11-16T21:16:35Z")
> [@qawsedrf57](#): > > A quick question, is it posible to use the baterry as a sort of p1 device to monitor my usage Absolutely, I assume you have an energy meter connected to your battery. Then add an energy device to your Homey from the Sigenergy app. > [@qawsedrf57](#): > > I i try to place a widget on a dashboard it say’s i need a plant device, i do have a batery the sigenstor Just add the plant device from the SigEnergy app. The plant is there since this is what Sigenergy calls it, the idea is that a plant can contain more than one inverter/battery. ---
**Author:** ![qawsedrf57](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/qawsedrf57/32/123371_2.png) [@qawsedrf57](https://community.homey.app/u/qawsedrf57)\ **Post date:** [November 17, 2025, 1:11pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/29 "2025-11-17T13:11:50Z")
thanks for the response i have i working! ---
**Author:** ![Andreas\_Jonsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreas_jonsson/32/121579_2.png) [@Andreas\_Jonsson](https://community.homey.app/u/Andreas_Jonsson)\ **Post date:** [November 18, 2025, 6:53am UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/30 "2025-11-18T06:53:09Z")
Hi, I’m a rookie at this and can’t get it to work, what i’m i doing wrong? ![IMG_6303](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/7/2700a978b2ef710c3d4a2a9ab05831045dbfc475.png) ---
**Author:** ![Andreas\_Jonsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreas_jonsson/32/121579_2.png) [@Andreas\_Jonsson](https://community.homey.app/u/Andreas_Jonsson)\ **Post date:** [November 18, 2025, 6:54am UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/31 "2025-11-18T06:54:06Z")
![IMG_17011](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/b/0b31a72f0e81c871b9a4d387673b8e292122ec4f.jpeg) ---
**Author:** ![Andreas\_Jonsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreas_jonsson/32/121579_2.png) [@Andreas\_Jonsson](https://community.homey.app/u/Andreas_Jonsson)\ **Post date:** [November 18, 2025, 6:54am UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/32 "2025-11-18T06:54:46Z")
![IMG_6302](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/e/7e86cafbb5e66f082562ea17063e2b4c9a15163a.png) ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [November 18, 2025, 7:17am UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/33 "2025-11-18T07:17:59Z")
This is what I have. `Modbus RTU Slave` vs your `Modbus RTU Host`. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/b/5b8d5f10c031e7d4c1352849478939536112e2b9.png) ---
**Author:** ![Pieter\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pieter_s/32/120806_2.png) [@Pieter\_S](https://community.homey.app/u/Pieter_S)\ **Post date:** [November 22, 2025, 9:08pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/35 "2025-11-22T21:08:19Z")
> [@Richard\_B](#): > > Furthermore, ensure that your Homey can communicate with your SigenStor within your local network. Sometimes, users are unaware that the communication occurs over the local network. If you have segmented networks and your Homey is on a different network from the Sigen devices, this will not work. Does it matter that my Homey is on wifi and my battery connected via ethernet cable? ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 22, 2025, 11:19pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/36 "2025-11-22T23:19:39Z")
> [@Pieter\_S](#): > > Does it matter that my Homey is on wifi and my battery connected via ethernet cable? No. But, make sure both are on the same subnet / vLAN. “Measuring is knowing” is a Dutch saying: With a [Net Scan app](https://community.homey.app/t/app-pro-netscan-version-2-0-6-test-version-2-0-8/47454) “TCP port” device you can check if Homey can reach the inverter port 502. Very easy to set up. Example: ![Screenshot_20251123_002326_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/b/3bd93ce8cfb82dfe53f6e17cdc8c01315655a233.jpeg) ![Screenshot_20251123_002303_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/3/535f2221879500a0c264b92d3878aba0fb73b8cb.jpeg) ---
**Author:** ![qawsedrf57](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/qawsedrf57/32/123371_2.png) [@qawsedrf57](https://community.homey.app/u/qawsedrf57)\ **Post date:** [December 1, 2025, 1:18pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/37 "2025-12-01T13:18:01Z")
is it posible to make a status indicator for the battery with a percentage in numbers so i can see how much there is left in the battery? now i have the green bar but it is hard to how much is left. ---
**Author:** ![Pieter\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pieter_s/32/120806_2.png) [@Pieter\_S](https://community.homey.app/u/Pieter_S)\ **Post date:** [December 2, 2025, 7:37pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/38 "2025-12-02T19:37:46Z")
Thank you for your help @Peter_Kawa and @Richard_B , I finally managed to connect my battery, although it turned out that my installer didn’t have the Modbus settings correct… I also wanted to connect my Sigen EV AC Charger and as mentioned in the start post I contacted Sigenergy via a ticket. They explained that when the Sigenstore’s Modbus is enabled, the EVAC’s modbus is automatically also enabled. However, since the default Modbus address for the EVAC is 1, which is the same as for the Sigenstor, I couldn’t connect. So Sigenergy changed it for me to 2, and now I can also find the EVAC charger. However, there is still an issue, see screenshots below: ![WhatsApp Image 2025-12-02 at 20.26.09](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/a/8ab4db936974c9f70b17ee4d68058adb7b5f9a57.jpeg) ![WhatsApp Image 2025-12-02 at 20.26.24](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/a/8ada841a914bbded19a912869d6116486b26526a.jpeg) Does somebody maybe know what the issue is and how it can be solved? Thank a lot again! ---
**Author:** ![rstroot](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rstroot/32/25166_2.png) [@rstroot](https://community.homey.app/u/rstroot)\ **Post date:** [December 4, 2025, 8:47pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/39 "2025-12-04T20:47:52Z")
Hello Richard, I installed the Sigen Stor and connected solar Panels, but I have the same problem as @Pieter_S and @Andreas_Jonsson I made sure that my Modbus TCP is enabled: ![Modbus Settings](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/3/e3a20bc1068b7084a6d1a457b813f4263819961a.jpeg) ![Modbus enable](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/4/241f762a8f97bc98952a44b03027e6be53fcb2d1.jpeg) Then I tested it via Netstat: ![Netstat Settings](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/f/3f82d4b0c8fba24896039c5d9f2970788e1f594d.jpeg) ![Modbus Test](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/9/d96e3e2aa52b05944f7fa3242925990d2e76c3de.jpeg) But when adding the device as Sigen Plant (or any other option) ![Add Device](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/1/51a3ac88bf79eb92d8fde9dabf7fa2c815b5ea75.jpeg) ![Add Device Settings](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/b/2bc0547018f8ddd920d54bc4af6d7b96d1fb3ab6.jpeg) I get the following error: ![Error](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/d/add73d4ff06c30b7b3db41376be1fbd59a85e29f.jpeg) I also tested it using the SolarEdge + Growatt TCP modbus app and that works! I really would prefer to use your app as it is dedicated to Sigen, so please help me understand why it is not working? ---
**Author:** ![Dunker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dunker/32/77765_2.png) [@Dunker](https://community.homey.app/u/Dunker)\ **Post date:** [December 17, 2025, 6:57am UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/40 "2025-12-17T06:57:25Z")
Hi Cant figure out whats wrong with these settings with the sigen ,. the installer has enabled modbus according to this picture , but cant connect with the sigenergy app ? When setting up the Sigenergy app in homey , choosing “system” as install . I can ping the device without any problem , is on the same vlan, using wired cable. Error: connection to modbus server closed is the error im getting . ? ![modbus.jpg](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/0/c0d508dcd1bfa8a528cbe37ad630898ccb1f2d06.jpeg) ---
**Author:** ![rstroot](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rstroot/32/25166_2.png) [@rstroot](https://community.homey.app/u/rstroot)\ **Post date:** [December 18, 2025, 9:55pm UTC](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965/41 "2025-12-18T21:55:13Z")
I also don’t get it working, so any help in how to debug this or to get it working would be really appreciated [Previous page](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965.md?page=1) [Next page](https://community.homey.app/t/app-pro-sigenergy-home-energy-powered-by-ai/143965.md?page=3)