# \[App\]\[Pro\] Satel Integra alarmsystem integration

**URL:** <https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654>\
**Category:** Apps\
**Tags:** app\
**Created:** [October 28, 2020, 7:48pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654 "2020-10-28T19:48:16Z")\
**Posts on this page:** 4\
**Page:** 6

<div class="post-metadata">

**Author:** ![autormali](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/autormali/32/174413_2.png) [@autormali](https://community.homey.app/u/autormali)\
**Post date:** [September 18, 2026, 1:44pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/103 "2026-09-18T13:44:03Z")

</div>

Tests results below. Have not noticed any bugs.

 ![arm modes testl](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/e/8e1404258bff92909101b5436d88d37355699fcd.png)

---

<div class="post-metadata">

**Author:** ![autormali](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/autormali/32/174413_2.png) [@autormali](https://community.homey.app/u/autormali)\
**Post date:** [September 18, 2026, 2:29pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/104 "2026-09-18T14:29:33Z")

</div>

I would correct text terms. Ged rid of from cards words “Day” and “Night” as in fact you can use this modes any time. And accordingly correct capabilities:

 ![Zrzut ekranu 2026-09-18 161317](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/3/33a0029f543d4dcdb3b7fc115a3feec55f4cd1a3.png)

This will reflect the names of the mobile app modes and ensure their consistency, thereby avoiding user confusion.

 ![share_6746294295251066160](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/0/b06de48c3d64e705fefeeffd19790ecf93a087ec.png)

---

<div class="post-metadata">

**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\
**Post date:** [September 18, 2026, 4:35pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/105 "2026-09-18T16:35:45Z")

</div>

Thanks you for testing and your feedback.

I will adjust the text in a new release this weekend and publish it to live.

If there are more features you like to add let me know I check what is possible.

---

<div class="post-metadata">

**Author:** ![autormali](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/autormali/32/174413_2.png) [@autormali](https://community.homey.app/u/autormali)\
**Post date:** [September 25, 2026, 7:52pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/106 "2026-09-25T19:52:15Z")

</div>

> [@Fac3](#):
>
> I just write to let the community know, finally issue has been found. If we turn off some of the power outputs of the Integra main board, this issue disappears. In the mean time the same “blinking” issue appeared at a new installation too. At first site we turned off the second power output, at the second site we need to disable the third power output, at both sites issue disappeared since then. Probably it’s a to date existing Integra Firmware issue.

Thank you very much for the tip. I had to disable the fourth power output (which was left unloaded) to eliminate the issue of the alarm contacts “flickering.” To be able to reset/acknowledge control panel fault alarms, it was necessary to install 2.2 kΩ resistors on each of the main unloaded power outputs (in my case, the third and fourth one).

[Previous page](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654.md?page=5)