# \[App\]\[Pro\] Satel Integra alarmsystem integration **URL:** \ **Category:** Apps\ **Tags:** app\ **Created:** [October 28, 2020, 7:48pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654 "2020-10-28T19:48:16Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\ **Post date:** [January 7, 2022, 9:34am UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/42 "2022-01-07T09:34:24Z")
Version 3.8.0 will be soon live ( in test now [Satel Integra Alarm App voor Homey | Homey](https://homey.app/nl-nl/app/com.satelintegra/Satel-Integra-Alarm/test/)) App is migrated to SDK3, also no delays seen anymore. Tested on on Integra 128 with 65+ zones connected. Special thank to [https://pro-alarm.nl/](https://pro-alarm.nl/) to make this possible. ---
**Author:** ![Not2Fast](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/not2fast/32/1239_2.png) [@Not2Fast](https://community.homey.app/u/Not2Fast)\ **Post date:** [May 24, 2022, 2:50pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/43 "2022-05-24T14:50:42Z")
Hi Mickel, Just to be sure… 🙂 I’m using your app version 3.8.1 with Homey on a Integra 32 panel and it works great! Until now used for arming and disarming with different flows. You mention that not all output can be controlled through Homey, but I’ve bought some smoke detectors and was wondering if it is possible to use the Satel siren as output, like If smoke detected then Satel → Siren on (I’m using module ETHM-1 (V1.07) (Not Plus!)) ---
**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\ **Post date:** [May 24, 2022, 3:31pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/44 "2022-05-24T15:31:34Z")
Hi, and thanks. I assume the smokedetectors are connected with homey and not directly to the satel panel? It doesn’t matter which ETHM-1 module is used! It depends on the outputfunction of the output. If your using outputfunction 1:burglary , these are not allowed to control directly thru homey. But if you e.g. using outputfunction 25:make/break these can control thru homey. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/e/ee1ccd836365838a1ce79da99cd3dc61d8c72cd1.png) Maybe you can install a second “special” fire siren and program this as 25:make/break If you want to use the internal siren from satel (thats progammed as 1:burglary or 2:fire/burglary or 3:fire) you need to be creative but should be possible with some programming in satel Never tryed it here. There are many outputfunctions in satel! And i did not test them all with homey if they can be controlled , so just try is my suggestion 🙂 ---
**Author:** ![Not2Fast](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/not2fast/32/1239_2.png) [@Not2Fast](https://community.homey.app/u/Not2Fast)\ **Post date:** [May 24, 2022, 3:51pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/45 "2022-05-24T15:51:03Z")
Hi Mickel, Thanks for your prompt message! And correct, Zigbee detectors connected to Homey. OK good to know that outputfunction 1 is not allowed, then I check with GuardX for the other options! Thanks, /Arno ---
**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\ **Post date:** [July 11, 2022, 7:00pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/46 "2022-07-11T19:00:27Z")
HI, Version 3.9.3 is Live. Added Satel Integra 256(plus) panel. ---
**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\ **Post date:** [July 20, 2022, 9:36am UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/47 "2022-07-20T09:36:01Z")
To all : Version 4.0.0 is test [Satel Integra Alarm App voor Homey | Homey](https://homey.app/nl-nl/app/com.satelintegra/Satel-Integra-Alarm/test/) and soon will be live. Changenotes : - Code Cleanup / improvement. - Added temperature readings for (wireless) zones @avd88 The temperature reading can be turn on/off per device, just go to the device settings and turn “temperature” ON. Only turn this option ON on the zones that support this!!! ---
**Author:** ![Remco\_Vermaire](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/remco_vermaire/32/30144_2.png) [@Remco\_Vermaire](https://community.homey.app/u/Remco_Vermaire)\ **Post date:** [December 7, 2022, 8:48pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/48 "2022-12-07T20:48:47Z")
Is it possible to enable the satel alarm from homey without an input delay (ingangsvertraging), so that the alarm comes on immediately and not, say, after 30 seconds? Due to this delay, certain flows do not run smoothly (e.g. Eufy cameras go from absent to home to absent mode). ---
**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\ **Post date:** [December 7, 2022, 9:29pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/49 "2022-12-07T21:29:31Z")
@Remco_Vermaire ,. Don’t know. If it’s possible you need to solve it in the satel panel… e.g when output x goes ON then arm the system with no delay. Pair the output in homey and use that for arm/disarm. Or .: Program a (virtual) output in satel that is ON when the system is armed and off when the system is disarmed,. Use this output status in your eufy flows L ---
**Author:** ![Remco\_Vermaire](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/remco_vermaire/32/30144_2.png) [@Remco\_Vermaire](https://community.homey.app/u/Remco_Vermaire)\ **Post date:** [December 7, 2022, 10:17pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/50 "2022-12-07T22:17:12Z")
Thanks for the tips. Met vriendelijke groet, Remco Vermaire ---
**Author:** ![zuur](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zuur/32/12284_2.png) [@zuur](https://community.homey.app/u/zuur)\ **Post date:** [March 14, 2023, 10:41pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/51 "2023-03-14T22:41:24Z")
Hi there, I have some problems with the app. I always used the old one from dirk but the new one from you seems more advanced. I deleted the old one and installed yours. When i arm the panel everything works fine. The user have only arm rights not disarming. But when i arm the panel at homey the logging tells me it goes on / off / on. I.have some logics on arming and disarming the panel from the old app. And you can understand this will make a lot of iritation on the famaly here at home. Lights off/ on / off Same for heating installation and a lot more. Have make a debugging rapport and send it to you ending on Diagnose rapport 8445095d90 Can you tell me what to do to solve this? ![Screenshot_20230314_234058_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/c/8cdef82ba85bcc6764717136f3480eb3483b1391.jpeg) ---
**Author:** ![Steven\_Bareman](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/steven_bareman/32/31404_2.png) [@Steven\_Bareman](https://community.homey.app/u/Steven_Bareman)\ **Post date:** [March 15, 2023, 11:34am UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/52 "2023-03-15T11:34:13Z")
I have the same problem, solved this with a logic that delays switching to avoid flashing lights and more 😉 ---
**Author:** ![zuur](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zuur/32/12284_2.png) [@zuur](https://community.homey.app/u/zuur)\ **Post date:** [March 15, 2023, 12:05pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/53 "2023-03-15T12:05:24Z")
Was thinking about that to but i have some issues with that. Can you share how you delayed the logic? Or did you just only delayed the writing of it? Is this how you did it? If system is arming then → delay 30 sec → write logic “not home” ---
**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\ **Post date:** [March 15, 2023, 4:29pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/54 "2023-03-15T16:29:22Z")
Some explanation how it works. When a flow arm the system, the app send the arm command to satel panel. But the satel.panel isn’t armed yet because of the entry/exit delay that is programmed in the panel…do to polling the app(homey) gets the unarm status back untill the satel is really armed after entry/exit delay is finished. That is the reason…can’t fixed that unfortunately. A delay or a extra control step should work. Or make a variable 1 or 0… When system is armed set variable to 1 and when unarmed set it to 0. Second flow, when variable is 1,delay 2 sec And system is armed do … I think this should work not tested ---
**Author:** ![Steven\_Bareman](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/steven_bareman/32/31404_2.png) [@Steven\_Bareman](https://community.homey.app/u/Steven_Bareman)\ **Post date:** [March 15, 2023, 5:17pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/55 "2023-03-15T17:17:02Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/5/d59674307401df3a9415b35c9cfdba11ec4cecc0.jpeg) This solution works great! ---
**Author:** ![zuur](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zuur/32/12284_2.png) [@zuur](https://community.homey.app/u/zuur)\ **Post date:** [March 15, 2023, 6:05pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/56 "2023-03-15T18:05:23Z")
Thanks! that did the job didn’t know the chronograph app. @Mickel_Luiten thanks for the clear explanation. This trick working correct now! ---
**Author:** ![radu](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/radu/32/130145_2.png) [@radu](https://community.homey.app/u/radu)\ **Post date:** [April 9, 2023, 8:53pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/57 "2023-04-09T20:53:45Z")
Hi everyone. This might be a little off-topic but I would really appreciate some advice. When it comes to Homey integration, would there be any advantages for working with the Integra 256 Plus versus the Integra 128-WRL? If it’s exactly the same from the Homey integration point-of-view, are there any notable differences/advantages for one or the other? I am aware the WRL has integrated wifi, but I am planning to add the tcp-ip module and a wifi module anyway, so anything apart from that? Many thanks in advance! ---
**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\ **Post date:** [April 9, 2023, 10:02pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/58 "2023-04-09T22:02:14Z")
Please read the specs on satel.eu between the 256 and 128 wel there is a huge difference. The 128wrl has internal (GMS)GPRS and abax(2).module(for wireless zones) buildin but no TCP/IP. Also 128 zones. Vs 256 zones. So of you don’t use (GMS) GPRS and/or ABAX it’s a waste of money to buy a 128wrl. But panels(with a TCP/IP module ) are supported by the app for homey ---
**Author:** ![radu](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/radu/32/130145_2.png) [@radu](https://community.homey.app/u/radu)\ **Post date:** [April 12, 2023, 8:14pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/59 "2023-04-12T20:14:15Z")
Thanks for the answer, it is inline with what I expected. Either way, even if I go with the 256plus I would still purchase the extra modules so I can have abax2, gsm and tcp/ip. Another question now: is there a way to trigger a gsm event (make a call, send an sms, etc) from homey, maybe using the “output state and control device”? ---
**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\ **Post date:** [April 13, 2023, 5:41am UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/60 "2023-04-13T05:41:58Z")
> [@radu](#): > > Thanks for the answer, it is inline with what I expected. Either way, even if I go with the 256plus I would still purchase the extra modules so I can have abax2, gsm and tcp/ip. Great, For the inergrating with HomeyPro you need the tcp-ip module all all modules are extra for your needs > [@radu](#): > > Another question now: is there a way to trigger a gsm event (make a call, send an sms, etc) from homey, maybe using the “output state and control device”? In both direction should be possible thru a output… Either way make a flow when output is switched to do something in Homey, or mkae a flow to switch the output and do sometihing in the satel(with some logic in the satel) ---
**Author:** ![Arjan\_Neet](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arjan_neet/32/17808_2.png) [@Arjan\_Neet](https://community.homey.app/u/Arjan_Neet)\ **Post date:** [June 9, 2023, 6:41pm UTC](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654/61 "2023-06-09T18:41:05Z")
I just set virtual outputs inside the Satel, disarmed, armed home and armed away, these virtual outputs I use inside homey to activate flows, works perfectly. [Previous page](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654.md?page=2) [Next page](https://community.homey.app/t/app-pro-satel-integra-alarmsystem-integration/36654.md?page=4)