# \[APP\]\[Pro\] Raspberry Pi - Monitor and control your RPi **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [August 19, 2024, 10:38am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652 "2024-08-19T10:38:19Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Pieter\_Pessers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pieter_pessers/32/8848_2.png) [@Pieter\_Pessers](https://community.homey.app/u/Pieter_Pessers)\ **Post date:** [August 25, 2024, 7:59pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/21 "2024-08-25T19:59:08Z")
Graag gedaan. Verdient. ---
**Author:** ![Geim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/geim/32/113356_2.png) [@Geim](https://community.homey.app/u/Geim)\ **Post date:** [August 26, 2024, 1:50pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/22 "2024-08-26T13:50:12Z")
> [@Gruijter](#): > > If you want to trigger on any state change, simply trigger on both cards (in an advanced flow Thanks, I will. It’s just because on Shelly it is possible that I asked: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/c/ecf82376430c42ec196ffb96b46f7fe385bcdb59.png) ---
**Author:** ![Undertaker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/undertaker/32/53278_2.png) [@Undertaker](https://community.homey.app/u/Undertaker)\ **Post date:** [August 26, 2024, 2:22pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/23 "2024-08-26T14:22:54Z")
You can also reach Raspis with Home Assistant installed. All you need to do is install the “Terminal and SSH” add-on in HA. During configuration, you only need to assign port 22 and a password. ![Screenshot_20240826-155808_Chrome](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/5/b5b7fdecd6fbe723fc183a09af265697d7e62228.jpeg) ![Screenshot_20240826-160436_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/c/6c170c05890d25b202bfe6f6ad63797653f2e6fc.jpeg) ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [August 26, 2024, 2:35pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/24 "2024-08-26T14:35:06Z")
> [@Undertaker](#): > > with Home Assistant installed. Nice. What OS is being used then? Is that a dedicated HA OS? ---
**Author:** ![Undertaker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/undertaker/32/53278_2.png) [@Undertaker](https://community.homey.app/u/Undertaker)\ **Post date:** [August 26, 2024, 4:00pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/25 "2024-08-26T16:00:37Z")
![Screenshot_20240826-175922_Chrome](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/8/784c76f1f8aa258ec1123d14e2f7366140a25c34.jpeg) > **[2024.8: Beautiful badges!](https://www.home-assistant.io/blog/2024/08/07/release-20248/)** > > Beautiful new badges for your dashboards, control Home Assistant with a local AI using Ollama, update your Matter device, manage KNX via the UI, goodbye services, hello actions! And much more! ---
**Author:** ![Geim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/geim/32/113356_2.png) [@Geim](https://community.homey.app/u/Geim)\ **Post date:** [August 31, 2024, 8:15am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/26 "2024-08-31T08:15:28Z")
Got my Pi Zero and added it as device, I can read all kind of Pi variables (temperature, CPU etc), but if I try to change the output of a pin, I get an error: Can’t set pin value, not an output. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/d/6d9ff7583d7f976d49cae07ae1631206e728c17e.png) I also tried to trigger an event whent a GPIO gets high, but no effect as well. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/5/55851afc9f241baf4feb060685d8a3988fba4e48.png) Am I missing/forgetting something? edit: Also with GPIO 22, 21 and other, I had some confusion with the GPIO pin numbers. edit2: I ssh’d into my Pi and changed an input into an output: “pinctrl set 16 op” and now it’s working. Inputs are working as well one of my breadboard cabe had a bad connector ☹ edit3: No need to SSH into my Pi, can do it in a flow as well: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/3/b351ad17d0b1d663eb4412921d3b7c266eff16aa.png) ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [August 31, 2024, 10:00am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/27 "2024-08-31T10:00:18Z")
> [@Geim](#): > > Can’t set pin value, not an output That means that pin is not configured as an output. You can use this command to set pin29 to output: **raspi-gpio set 29 op** More info on gpio can be found here: [Quick Start: Raspberry Pi GPIO Terminal Interface - Embedded Computing Design](https://embeddedcomputing.com/technology/processing/interface-io/quick-start-raspberry-pi-gpio-terminal-interface) ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [August 31, 2024, 10:32am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/28 "2024-08-31T10:32:43Z")
@Geim (assuming it was you), many thx for your donation! 🥰🥳 ---
**Author:** ![Geim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/geim/32/113356_2.png) [@Geim](https://community.homey.app/u/Geim)\ **Post date:** [August 31, 2024, 11:01am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/29 "2024-08-31T11:01:40Z")
You’re most welcome and thanks for the support. ---
**Author:** ![cbeerse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cbeerse/32/34307_2.png) [@cbeerse](https://community.homey.app/u/cbeerse)\ **Post date:** [September 11, 2024, 8:35pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/30 "2024-09-11T20:35:21Z")
As a long time unix and linux system administrator I do welcome this idea. However 1 thing should relative fast be updated: The password for the ssh-user should NOT be stored anywhere. Since ssh is used, it is better to use a key-exchange with public and private keys. Once the key-access is in place I might even use it. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [September 30, 2024, 12:50pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/31 "2024-09-30T12:50:44Z")
v1.0.2 is ready for testing: [Raspberry Pi App for Homey | Homey](https://homey.app/a/com.gruijter.rpi/test/) - Added Polish language support. Many thx to Hubert Ryglowski for translating! ---
**Author:** ![Geim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/geim/32/113356_2.png) [@Geim](https://community.homey.app/u/Geim)\ **Post date:** [October 16, 2024, 9:50am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/32 "2024-10-16T09:50:19Z")
I get this quite often: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/4/a42e32b85a4b16f394030486073871d0553353b8.png) And if i click on it: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/5/c5e2d367a19ebe391dabc8286b1e6ae1782359c1.png) When I restart the app manually it works again. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [October 16, 2024, 10:59am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/33 "2024-10-16T10:59:00Z")
Bad connection, or your rpi is too busy. Especially if it is a rpi0 you need to increase the poll time. ---
**Author:** ![Geim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/geim/32/113356_2.png) [@Geim](https://community.homey.app/u/Geim)\ **Post date:** [October 16, 2024, 11:02am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/34 "2024-10-16T11:02:55Z")
> [@Gruijter](#): > > need to increase the poll time This one you mean? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/4/940433d6a6b4e07a93648e87f1b0c76b31f7993e.png) ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [October 16, 2024, 11:13am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/35 "2024-10-16T11:13:13Z")
Both actually. Set GPIO poll to 5 secs. Or disable completely (0) if you do not use GPIO states in Homey. Set other poll to e.g. 10 secs. ---
**Author:** ![Geim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/geim/32/113356_2.png) [@Geim](https://community.homey.app/u/Geim)\ **Post date:** [October 16, 2024, 11:21am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/36 "2024-10-16T11:21:11Z")
Top one was already on 10, changed to bottom one to 5. Let’s see what it brings. I do use some IO pins for input (switching on lights by hand). ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/a/4a48913de52ec4b745bdf7e34ef4fb054d7d9606.png) ---
**Author:** ![Geim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/geim/32/113356_2.png) [@Geim](https://community.homey.app/u/Geim)\ **Post date:** [October 19, 2024, 8:59am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/37 "2024-10-19T08:59:29Z")
Nope, still same problem. Too bad. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/1/91489a0df9367d263590bcb68f9a2d762cbcb432.png) No problem pinging the device and after restarting the app, it all works fine again. Maybe the app doesn’t reconnect automatic if the wifi connection is temporary lost? Edit: I restarted the app and the connection was lost within 6 hours. I give up, this isn’t a stable solution (for me). ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [November 9, 2024, 10:32am UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/38 "2024-11-09T10:32:54Z")
New version 1.0.3 is ready for testing: [Raspberry Pi App for Homey | Homey](https://homey.app/a/com.gruijter.rpi/test/) - Added Polish language support. Many thx to Hubert Ryglowski for translating! ---
**Author:** ![Raymond\_Slegers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/raymond_slegers/32/48883_2.png) [@Raymond\_Slegers](https://community.homey.app/u/Raymond_Slegers)\ **Post date:** [January 27, 2025, 1:34pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/39 "2025-01-27T13:34:41Z")
Hi, i am using the app and i noticed that the (wired) network statistics are 0. When i took a look into the source code i saw eth0 is used to get the info, but on my Raspberry Pi the interface is called end0 and i know linux now default create names for the network-interfaces, so can the app be updated to set the network-interface-names in the settings (where also the login-credentials and ip-address are set ? ---
**Author:** ![Friedhofsblond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/friedhofsblond/32/93838_2.png) [@Friedhofsblond](https://community.homey.app/u/Friedhofsblond)\ **Post date:** [April 26, 2025, 1:10pm UTC](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652/40 "2025-04-26T13:10:29Z")
Hello @Gruijter Thank you for your app. I’m currently using it for a: Dell Wyse 5070 4xCPU Debian 12, x64 Model: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz RAM: 15.3 GB / SSD (SATA) Disk Size: 232.2 GB It would be great if you could perhaps build an app for general hardware? I’m still missing the features marked in green. Perhaps you have a bit of time for that sometime? 😉 😊 ![WhatsApp Bild 2025-04-26 um 09.31.36_3e4f53fd](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/5/45cc124355193ea345d2b864e740122ca480b1d4.jpeg) ![WhatsApp Bild 2025-04-26 um 09.31.36_c7f39beb](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/0/006f326086ec5d68ed2047578812ebc86bf2e7e5.jpeg) [Previous page](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652.md?page=1) [Next page](https://community.homey.app/t/app-pro-raspberry-pi-monitor-and-control-your-rpi/114652.md?page=3)