# \[APP\]\[PRO\] Plugwise2Py - Monitor and Control Plugwise Circles without Stretch **URL:** \ **Category:** Apps\ **Tags:** app, zigbee\ **Created:** [March 15, 2019, 10:32pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635 "2019-03-15T22:32:05Z")\ **Posts on this page:** 15\ **Page:** 2
**Author:** ![Andyh747](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andyh747/32/56728_2.png) [@Andyh747](https://community.homey.app/u/Andyh747)\ **Post date:** [August 28, 2022, 10:02am UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/21 "2022-08-28T10:02:23Z")
> [@Gruijter](#): > > Pw2py keeps logs on the rpi. But im not sure if you can use that. If you cannot backup the data while connected to the stretch consider the data to be lost. That’s a shame as I lost access to the data when Plugwise pulled the server. However I understand the Circles store around 2-3 years of data. It’s a real pity I can’t get access to this data for backup. There’s no way to access the data through the Stretch, as far as I know, as all data was stored on the Plugwise server until it was pulled. If anyone else knows a way to backup the historic data stored on the Circles please advise as this would be extremely useful. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [October 14, 2022, 6:46am UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/22 "2022-10-14T06:46:23Z")
Just in case you are wondering, I will definitely upgrade this app to be compatible with SDK3 and the new Homey Pro. I have many circles that I use myself. They are the core of my own home automation. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [October 15, 2022, 8:32pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/23 "2022-10-15T20:32:15Z")
New version 4.0.1 is ready for testing: [Plugwise2py App for Homey | Homey](https://homey.app/a/com.gruijter.plugwise2py/test) - Rewrite to SDK3. - Migrate to compose. - Multiple small improvements. - MQTT upgrade v4.3.7 This will ensure the compatibility with future Homey versions. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [December 17, 2022, 12:46pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/24 "2022-12-17T12:46:17Z")
@dcj Many thanks for your kind donation. Much appreciated! 🥰 ---
**Author:** ![Jan\_Siderius](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jan_siderius/32/71011_2.png) [@Jan\_Siderius](https://community.homey.app/u/Jan_Siderius)\ **Post date:** [August 12, 2023, 4:44pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/25 "2023-08-12T16:44:15Z")
After 2 weeks i can’t get it working. I filled in my circle mas adresses , let it run for a few hours, i don’t see circles in the web page. 2023-08-12 15:35:22,484 - pw-logger - DEBUG - PARS 01 EVAL 1 2023-08-12 15:35:22,484 - pw-logger - DEBUG - PARS 01 2023-08-12 15:35:22,484 - pw-logger - DEBUG - PARS 01 EVAL 1 2023-08-12 15:35:22,484 - pw-logger - DEBUG - PARS 050D6F00029C28DC 2023-08-12 15:35:22,484 - pw-logger - DEBUG - PARS 050D6F00029C28DC EVAL 36 4069190721349852 2023-08-12 15:35:22,484 - pw-logger - DEBUG - PARS 0805 2023-08-12 15:35:22,484 - pw-logger - DEBUG - PARS 0805 EVAL 2053 2023-08-12 15:35:22,485 - pw-logger - DEBUG - PARS FF 2023-08-12 15:35:22,485 - pw-logger - DEBUG - PARS FF EVAL 255 2023-08-12 15:35:22,485 - pw-logger - DEBUG - \ This what i get in the logging. All the circles are working in Source and also with a Stretch 3.0 ---
**Author:** ![GJ\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gj_b/32/80077_2.png) [@GJ\_B](https://community.homey.app/u/GJ_B)\ **Post date:** [January 3, 2024, 7:58pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/26 "2024-01-03T19:58:21Z")
I’d like to do a final attempt to add my plugwise circles into Homey pro 2023 via the pw2py app and a raspberry PI with plugwise dongle. Raspberry Pi 3 Model B Rev 1.2 Operating system 20231012~bullseye (64 bit) I followed all instructions to set up the pw2py on raspberry , including the config files. No errors reported. I set the parameters in the app on Homey (IP, mqtt port 1883). Testing MQTT connection gives positive result. Issues: the link to browser seems to work, but circles are not available (empty screen). An error occurs: niet beveiligd. The app on homey gives an error in the logfiler: [ERROR: Url error: [Errno 111] connection refused. Do you have any suggestions to fix this? Coffee or beer can be arranged 🙂 ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [January 4, 2024, 10:09am UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/27 "2024-01-04T10:09:17Z")
> [@GJ\_B](#): > > An error occurs: niet beveiligd. Is that caused by an encryption setting maybe? Look at your TLS configuration. ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [March 18, 2024, 2:23pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/28 "2024-03-18T14:23:57Z")
f56c6ebe-e421-4336-83ec-1b589f71816b crashing again short after restarting app SOLVED, resetting the Pi solved the crashing. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [September 28, 2024, 9:32am UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/29 "2024-09-28T09:32:18Z")
new version 4.1.0 is ready for testing: [Plugwise2py App for Homey | Homey](https://homey.app/a/com.gruijter.plugwise2py/test/) - Capability flows compatibility \>=fw12.2.0. - MQTT upgrade to v4.3.8 ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [April 2, 2025, 2:38pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/30 "2025-04-02T14:38:07Z")
Used it for a long time without problems but did some stupid things so I have to re-install the raspberry-pi. Doing so, I encounter problems, first with 32bit OS getting the message that OS64 is expected, then with OS64, when docker is installed, the next is shown: ```auto Server: Docker Engine - Community Engine: Version: 28.0.4 API version: 1.48 (minimum version 1.24) Go version: go1.23.7 Git commit: 6430e49 Built: Tue Mar 25 15:07:18 2025 OS/Arch: linux/arm64 Experimental: false containerd: Version: 1.7.27 GitCommit: 05044ec0a9a75232cad458027ca83437aae3f4da runc: Version: 1.2.5 GitCommit: v1.2.5-0-g59923ef docker-init: Version: 0.19.0 GitCommit: de40ad0 ================================================================================ To run Docker as a non-privileged user, consider setting up the Docker daemon in rootless mode for your user: dockerd-rootless-setuptool.sh install Visit https://docs.docker.com/go/rootless/ to learn about rootless mode. To run the Docker daemon as a fully privileged service, but granting non-root users access, refer to https://docs.docker.com/go/daemon-access/ WARNING: Access to the remote API on a privileged Docker daemon is equivalent to root access on the host. Refer to the 'Docker daemon attack surface' documentation for details: https://docs.docker.com/go/attack-surface/ ================================================================================ -bash: Executing: command not found -bash: syntax error near unexpected token `newline' ``` Is this alarming? Ignoring this, After the install is finished and Docker is restarted, the Circles data is collected, so far so good, but after that, nothing happens, all my Circles can be seen via the webbrowser but the Circles cannot be switched via the webbrowser. @Gruijter Please advise what to do. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [April 2, 2025, 2:51pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/31 "2025-04-02T14:51:57Z")
Better use the full rpi image I created. The docker image itself doesnt seem to be working anymore 😬 ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [April 2, 2025, 3:27pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/32 "2025-04-02T15:27:02Z")
The full rpi image is also using OS32, same expecting OS64. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [April 2, 2025, 4:32pm UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/33 "2025-04-02T16:32:06Z")
Yes, but is is a os32 version that works with the embedded docker image. ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [April 3, 2025, 8:43am UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/34 "2025-04-03T08:43:53Z")
YES! That’s the solution, thanks very much. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [September 26, 2026, 10:41am UTC](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635/35 "2026-09-26T10:41:52Z")
Version 4.2.0 is ready for testing: > **[Plugwise2py | Homey](https://homey.app/en-us/app/com.gruijter.plugwise2py/Plugwise2py/test/)** > > Monitor and control Plugwise Circles via Plugwise2py - Add evcharger\_charging capability - Added more translations - Stability improvements - MQTT upgrade to v5.16.0 - Homey compatibility \>=12.9.0 When setting a socket to ‘ev Charger’ the on/off capability will be replaced by a evcharger\_charging capability. [Previous page](https://community.homey.app/t/app-pro-plugwise2py-monitor-and-control-plugwise-circles-without-stretch/10635.md?page=1)