# \[APP\]\[PRO\] Plugwise Smile P1 - Dutch and Belgian Smart Meter Reader **URL:** \ **Category:** Apps\ **Tags:** app\ **Created:** [January 26, 2019, 3:15pm UTC](https://community.homey.app/t/app-pro-plugwise-smile-p1-dutch-and-belgian-smart-meter-reader/8012 "2019-01-26T15:15:22Z")\ **Posts on this page:** 1\ **Showing post:** 77
**Author:** ![Paul\_Kessels](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul_kessels/32/3750_2.png) [@Paul\_Kessels](https://community.homey.app/u/Paul_Kessels)\ **Post date:** [December 2, 2019, 11:02am UTC](https://community.homey.app/t/app-pro-plugwise-smile-p1-dutch-and-belgian-smart-meter-reader/8012/77 "2019-12-02T11:02:30Z")
@Gruijter , the apps works great, thanks. Just a question with regards to the new energy usage feature of Homey. I noticed that the energy usage shown (the total W provided by the Smile P1 in the circle) is an actual usage number, not an aggregated daily (or weekly or monthly) total. Since devices like refrigerators turn on and off every few hours and ovens are only used for cooking, the actual usage isn’t telling a lot. Is there a way to show the total accumulated energy usage instead? I found this ( @Frans_Keeman ) in another thread, not sure if that helps: > [@Homey firmware v3.0.0 (exp)](https://community.homey.app/t/homey-firmware-v3-0-0-exp/19278/72): > > The smart meter is the benext p1 meter. No idea if this is already updated to 3.0 i found this: Smart meters If you are the developer of an app that adds support for smart meters (e.g. a P1 meter for The Netherlands), you should make sure that you set the cumulative flag in the device’s energy object. Also make sure that you are not providing negative measure\_power values to the setCapabilityValue method. so i think its not updated yet? PS: and the gas usage is not shown in the Athom Energy screen, is that correct? --- _[View the full topic](https://community.homey.app/t/app-pro-plugwise-smile-p1-dutch-and-belgian-smart-meter-reader/8012)._