# \[APP\]\[Pro\] Philips Hue Zigbee (Without the bridge)
**URL:** https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734
**Category:** Apps
**Tags:** app, zigbee
**Created:** [May 12, 2020, 11:53am UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734 "2020-05-12T11:53:46Z")
**Posts on this page:** 20
**Page:** 22
### Author:  [@TheFops](https://community.homey.app/u/TheFops)
#### Post date: [February 21, 2021, 2:52pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/449 "2021-02-21T14:52:36Z")
Yes I know how to install using CLI.
Should I install the master branch?
---
### Author:  [@HuisCHovens](https://community.homey.app/u/HuisCHovens)
#### Post date: [February 21, 2021, 3:01pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/450 "2021-02-21T15:01:23Z")
I have for the v5 test version.
Comes the possibility to press the dimmer switch several times on the app ?
Hue essential you can set that. Like the aqara switchen And is the new hue dimmer switch supported ?
---
### Author:  [@johan\_bendz](https://community.homey.app/u/johan_bendz)
#### Post date: [February 21, 2021, 3:09pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/451 "2021-02-21T15:09:52Z")
The sdk3 branch is for firmware 5. Thanks!
---
### Author:  [@johan\_bendz](https://community.homey.app/u/johan_bendz)
#### Post date: [February 21, 2021, 3:11pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/452 "2021-02-21T15:11:53Z")
Hi, the new dimmer switch is under develoment.
The old dimmer switch supports on/off, dim up / hold dim up, dim down / hold dim down and release a dim button.
The device itself does not send ”pressed two times” or anything else like this so I have no way to know if you pressed one time and then one time again or double tapped. You can however create that check in a flow if you want, use a variable and some logics,
---
### Author:  [@HuisCHovens](https://community.homey.app/u/HuisCHovens)
#### Post date: [February 21, 2021, 3:23pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/453 "2021-02-21T15:23:21Z")
Nice we wait for it.
Hue essentieel Android app on the phone can even push the trick three times on a button you want i have my 3 lights on the power on button. I would like to see the homey too but for now i stick to hue essentieel with multiple clicks or the Aqara switch.
---
### Author:  [@TheFops](https://community.homey.app/u/TheFops)
#### Post date: [February 21, 2021, 4:25pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/454 "2021-02-21T16:25:12Z")
Ok installed the latest version but I still get the same error.
---
### Author:  [@johan\_bendz](https://community.homey.app/u/johan_bendz)
#### Post date: [February 21, 2021, 4:37pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/455 "2021-02-21T16:37:55Z")
OK, did you remove the device and pair it again? If so, send a crash report.
---
### Author:  [@TheFops](https://community.homey.app/u/TheFops)
#### Post date: [February 21, 2021, 4:56pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/456 "2021-02-21T16:56:54Z")
Thanks, didn’t know I had to repair them. I tried one light, now it seems to work. Thanks for your help. I will repair all my lights and repair my flows now.
---
### Author:  [@johan\_bendz](https://community.homey.app/u/johan_bendz)
#### Post date: [February 21, 2021, 5:28pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/457 "2021-02-21T17:28:30Z")
Thanks for the feedback, I will make the change to the app store in next update.
---
### Author:  [@Martin\_Tschanun](https://community.homey.app/u/Martin_Tschanun)
#### Post date: [February 21, 2021, 6:58pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/458 "2021-02-21T18:58:03Z")
Hi @johan_bendz i tried v.2.0.28 today but 3 of my motion sensor weren t working anymore (Temp and lux was reporting but no motion anymore) i also tried to remove and add in .28 but still the same fault. So i downgraded to .26 again and still the same fault, then i tried to do a ptp but still the same fault after i removed and readded the motion sensors again they are now working. All my motion sensor have already the newest FW i upgraded it via hue bridge before i connected them to homey.
---
### Author:  [@johan\_bendz](https://community.homey.app/u/johan_bendz)
#### Post date: [February 21, 2021, 7:19pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/459 "2021-02-21T19:19:31Z")
Thanks @Martin_Tschanun, for this valuable feedback. 👍 I have received several feedbacks since my post regarding the firmware and it is now obvious that this is not the reason for the problems. 🤔
Sadly this means re-pair is the only solution I can offer right now. Happy that did the trick for you!
---
### Author:  [@johan\_bendz](https://community.homey.app/u/johan_bendz)
#### Post date: [February 26, 2021, 1:48pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/460 "2021-02-26T13:48:20Z")
😍 **Philips Hue Zigbee now supports more than 100 kind of devices and counting!** 😍
Now working on adding support for the new Dimmer Switch and some extra light devices/models.
(and as always fixing bugs as we find them 🧐 )
---
### Author:  [@jeremypsl](https://community.homey.app/u/jeremypsl)
#### Post date: [March 1, 2021, 7:15am UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/461 "2021-03-01T07:15:59Z")
Is it possible to control the state after powerloss ?
---
### Author:  [@Taos\_Artwork](https://community.homey.app/u/Taos_Artwork)
#### Post date: [March 1, 2021, 1:24pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/462 "2021-03-01T13:24:00Z")
Hi @johan_bendz Unfortunately I still can’t connect these lamps with the Homey Hue Zigbee App. Can you tell me which ones they are within the app? Especially then the Philips Hue White ambiance recessed bathroom spotlight.
When I add them, they still show up as a Zigbee device and I can only turn them on and off. No other control or change of colour temperature possible.
Thanks in advance!
---
### Author:  [@johan\_bendz](https://community.homey.app/u/johan_bendz)
#### Post date: [March 1, 2021, 1:27pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/463 "2021-03-01T13:27:12Z")
> [@jeremypsl](#):
>
> Is it possible to control the state after powerloss ?
Not at the moment, I have working code for it but some devices crashed when I released it to App Store Test so I rolled back. Will try again later and test better before rolling out
.
---
### Author:  [@rvdeijk](https://community.homey.app/u/rvdeijk)
#### Post date: [March 1, 2021, 4:56pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/464 "2021-03-01T16:56:50Z")
Is it this light? [https://www.philips-hue.com/en-gb/p/hue-white-ambiance-milliskin-recessed-spotlight/5041148P7](https://www.philips-hue.com/en-gb/p/hue-white-ambiance-milliskin-recessed-spotlight/5041148P7)
If not, provide an url for @johan_bendz then he can together with the info you already provided add the light to an existing device if already available in the app, otherwise it will be added to the app.
Are you btw on Homey V5? If not I would suggest to upgrade to V5 and try to add the light once more. New devices will also be added to V5, for V4 you have to wait much longer (or maybe it won’t be added anymore for V4, since V5 is official released)
Edit:
@Taos_Artwork I do see two recessed lights in the app for V5:
---
### Author:  [@jeremypsl](https://community.homey.app/u/jeremypsl)
#### Post date: [March 1, 2021, 5:00pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/465 "2021-03-01T17:00:11Z")
Thanks for your work.
---
### Author:  [@Taos\_Artwork](https://community.homey.app/u/Taos_Artwork)
#### Post date: [March 1, 2021, 6:12pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/466 "2021-03-01T18:12:39Z")
Hello,
This is not the right lamp, neither are the two you suggest below. I have already made the request several times, with the weburl, with the image from Homey, everything complete.
I think it still hasn’t been added or I just can’t find which one it is. I have already tried every lamp that even slightly resembles it in the App.
My Homey runs on V5, since before the official release …
This is the set I have got:
[https://www.philips-hue.com/nl-be/p/hue-white-ambiance-adore-bathroom-inbouwdownlight/3417611P6](https://www.philips-hue.com/nl-be/p/hue-white-ambiance-adore-bathroom-inbouwdownlight/3417611P6)
---
### Author:  [@johan\_bendz](https://community.homey.app/u/johan_bendz)
#### Post date: [March 1, 2021, 7:52pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/467 "2021-03-01T19:52:34Z")
Hi @Taos_Artwork, you are correct. I have them on my todo list. Will add with next release.
---
### Author:  [@Taos\_Artwork](https://community.homey.app/u/Taos_Artwork)
#### Post date: [March 1, 2021, 7:58pm UTC](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734/468 "2021-03-01T19:58:43Z")
Thanks!!
[Previous page](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734.md?page=21)
[Next page](https://community.homey.app/t/app-pro-philips-hue-zigbee-without-the-bridge/29734.md?page=23)