# \[APP\]\[Pro\] Onkyo Receiver - Control your sound at home

**URL:** <https://community.homey.app/t/app-pro-onkyo-receiver-control-your-sound-at-home/30554>\
**Category:** Apps\
**Tags:** app, community-app\
**Created:** [May 28, 2020, 8:51pm UTC](https://community.homey.app/t/app-pro-onkyo-receiver-control-your-sound-at-home/30554 "2020-05-28T20:51:53Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\
**Post date:** [May 28, 2020, 8:51pm UTC](https://community.homey.app/t/app-pro-onkyo-receiver-control-your-sound-at-home/30554/1 "2020-05-28T20:51:53Z")

</div>

> **[Onkyo Receiver | Homey](https://homey.app/nl-nl/app/com.onkyo/Onkyo-Receiver/)**
>
> Control your sound at home

**Onkyo/Pioneer receiver app**

Control your Onkyo network-enabled receiver  
Some Pioneer receivers will also work.

Features

**Gerenal settings for**  
\* IPaddress  
\* Port (typical ports used are 60128, 8102 or 23)  
\* Maximum volume settings (Maximum volume that will be send to receiver and slider scaling)  
\* Volumestep (for the + and - on the devicecard(s))  
\* Receiver volumestep (some receivers do 0,5 volume steps instead of normal 1 steps)

Sererate devicecards for main zone, zone2 and zone3 (main zone is mandatory)

**Capabilities on devicecards:**

- On/off
- Mute on/off
- Volumeslider (scaling with the Maximum volume setting)
- Volumeup (with volumestep setting)
- Volumedown (with volumestep setting)
- Input

**Flowtrggers:**

- power on
- power off
- volume change
- Receive custom command (general flow)

**Flowconditions**

- Turned on / off

**Flowactions**

- Turn on
- Turn off
- Toggle on/off
- Set volume to.[Paypal Donatation](https://www.paypal.com/donate?hosted_button_id=4Z6FSAJLMYDNN)
- Mute the volume
- Unmute te volume
- Turn the volume down
- Turn the volume up
- Send custom command (general flow)
- Send RAW EISCP command (general flow)

After install go to the general settings and set the ipPaddress, port, maxvolume, volumestep and receiver volumestep.

Add the device(s), main zone is mandatory.

App using the node-eiscp from [GitHub - tillbaks/node-eiscp: node module to interface with onkyo receivers (eiscp protocol)](https://github.com/tillbaks/node-eiscp).

The syntax is: zone.command=argument.

- Example : main.power=on
- Example : zone2.volume=22

Also possible to send RAW EISCP command like PWR00 for power OFF or PWR01 for power ON  
Check the command list

**Supported Languages:**

- 🇬🇧 English

**Contributions**  
If you appreciate this app, contribute to future development by making a [paypal contribution](https://www.paypal.me/mickelluiten)

[![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/9/2916364caa1239076c12be293d270d5980d9d272.png) ](https://paypal.me/mickelluiten)

**Apps made by @mickelluiten**

- [Satel Integra Alarm](https://homey.app/nl-nl/app/com.satelintegra/Satel-Integra-Alarm/)
- [Daikin ONECTA](https://homey.app/nl-nl/app/climate.onecta.daikin/Daikin-ONECTA/)
- BrandweerRooster

---

_[View the full topic](https://community.homey.app/t/app-pro-onkyo-receiver-control-your-sound-at-home/30554)._