# \[APP\]\[PRO\] Nibe MyUplink **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [December 16, 2023, 8:40pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096 "2023-12-16T20:40:44Z")\ **Posts on this page:** 20\ **Page:** 6
**Author:** ![Jan\_Penning](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jan_penning/32/71173_2.png) [@Jan\_Penning](https://community.homey.app/u/Jan_Penning)\ **Post date:** [January 21, 2024, 11:36am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/101 "2024-01-21T11:36:17Z")
Hi Gal, logs have been sent. I received a code. Do you need that code? ---
**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\ **Post date:** [January 21, 2024, 11:48am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/102 "2024-01-21T11:48:43Z")
No need, I got your logs. I will check, thank you. ---
**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\ **Post date:** [January 22, 2024, 12:15am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/103 "2024-01-22T00:15:24Z")
@Jan_Penning - I inspected your logs. The communication with your pump works very good, I can see the datapoints reaching the app as expected. Please do the following: 1. Try to remove your device and add it again 2. After you added the device send me logs. In the comment, write that this was taken right after adding the device. 3. Wait for a few hours, or until you are sure one of the datapoints have changed (although you do not see the change on the app). If you wait for a few hours, I am pretty sure the outside-temperature will need to change, so it’s a good example 4. After you waited for a few hours, send me logs once again. Tell me which datapoint you expected to change but was not changed in the app Thank you for assisting in solving this ---
**Author:** ![Jan\_Penning](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jan_penning/32/71173_2.png) [@Jan\_Penning](https://community.homey.app/u/Jan_Penning)\ **Post date:** [January 22, 2024, 8:10am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/104 "2024-01-22T08:10:07Z")
Hi Gal, Thanks for all the time you are investing in this! I just removed and then re-added the device and sent you the logs. Later today, I shall send you the logs once again. For now, I did not change the selection of the data points but kept the default ones. Perhaps this can have an effect as well. Kind regards, Jan ---
**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\ **Post date:** [January 22, 2024, 11:03am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/105 "2024-01-22T11:03:19Z")
@Gal_Carmeli I have the same issue as reported by @Jan_Penning if it helps. ---
**Author:** ![Jacob\_Lantz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jacob_lantz/32/78924_2.png) [@Jacob\_Lantz](https://community.homey.app/u/Jacob_Lantz)\ **Post date:** [January 22, 2024, 11:19am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/106 "2024-01-22T11:19:05Z")
I still have the same issue to. I realized that myuplink iOS app also stops reporting updates after connecting homey app to API. Can it be a rate limit issue? ---
**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\ **Post date:** [January 22, 2024, 12:44pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/107 "2024-01-22T12:44:14Z")
Whoever has the issue of capabilities not refreshing - please send logs. Its best if you can sent logs, wait a few hours (for the datapoints to be refreshed) and send again. Mention in your logs whether its the first or the second. As for supporting F-series (VVM320 for example) - it’s tough. They do not support the API properly. I am working on it, but it will take time. ---
**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\ **Post date:** [January 22, 2024, 12:52pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/108 "2024-01-22T12:52:04Z")
The limit issue is interesting… From what I have seen with @Jan_Penning case, the service did not refuse to provide the data. If it has been a rate limit, I would expect to get somekind of a refusal… @Jacob_Lantz , @hyper - can you please send me logs? Put a sentence describing the problem on the comments of the logs. ---
**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\ **Post date:** [January 22, 2024, 5:00pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/109 "2024-01-22T17:00:26Z")
First logs sent. Will send again in a couple of hours. ---
**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\ **Post date:** [January 22, 2024, 6:30pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/110 "2024-01-22T18:30:07Z")
All, I have found the bug in the capabilities which are not updated. A stupid bug… I must remember never to code when I am tired 🤣 I fixed the bug, I am testing it right now. I will commit my changes tonight or early morning tomorrow. I hope Homey will approve my commit fast so you can all have it. Thank you all very much for reporting this and assisting in debugging! I apologize for taking your time on it 🙂 @hyper @Jan_Penning @Jacob_Lantz ---
**Author:** ![Jan\_Penning](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jan_penning/32/71173_2.png) [@Jan\_Penning](https://community.homey.app/u/Jan_Penning)\ **Post date:** [January 22, 2024, 6:39pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/111 "2024-01-22T18:39:18Z")
No worries Gal! Happy to help you out, great that you found the bug. Looking forward to the new version! ---
**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\ **Post date:** [January 22, 2024, 8:15pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/112 "2024-01-22T20:15:51Z")
Awesome thanks! Another thing, a feature request. 🙂 I’ve used a When card to trigger when my hot water temp drops below a certain threshold. Would it be possible to add a _When Datapoint is above/below Datapoint value”_ trigger? ---
**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\ **Post date:** [January 22, 2024, 8:33pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/113 "2024-01-22T20:33:11Z")
@hyper - you already have this feature 🙂 Choose the flow card “When changes its value\>” Connected it to a logic AND card " is less than On the first , select “Datapoint Value” Here’s an example on how I did it with “Outdoor temperature is less that 20”: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/f/0f3d7fcb5834d9b35c4a243f6ec6dcd56373122f.png) Will this work for you? ---
**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\ **Post date:** [January 22, 2024, 9:24pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/114 "2024-01-22T21:24:03Z")
The version with the bugfix is submitted, and was approved immediately by Homey. You should all get the fixed version: 1.1.2 If you see anymore issues, please let me know. Thanks again, everyone! ---
**Author:** ![Jacob\_Lantz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jacob_lantz/32/78924_2.png) [@Jacob\_Lantz](https://community.homey.app/u/Jacob_Lantz)\ **Post date:** [January 23, 2024, 8:05pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/115 "2024-01-23T20:05:48Z")
Great work! Updates like a champ now. ---
**Author:** ![Jacob\_Lantz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jacob_lantz/32/78924_2.png) [@Jacob\_Lantz](https://community.homey.app/u/Jacob_Lantz)\ **Post date:** [January 25, 2024, 8:18am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/116 "2024-01-25T08:18:27Z")
Nope i celebrated to soon. It did work fine when I tried it on 1.1.2 but day after I woke up to 1.1.3 and myuplink was brooken again. To get myuplink app running I completely need to disconnect the connection from my heater to my uplink and reconnect it. But when I connect the homey app it reads values one time then freezes up the connection completely (both to homey app and my uplink app). ---
**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\ **Post date:** [January 25, 2024, 8:35am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/117 "2024-01-25T08:35:11Z")
@Jacob_Lantz - can you please send diagnostic report? Please describe the issue on the comments of your report ---
**Author:** ![Carl\_Udden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/carl_udden/32/82207_2.png) [@Carl\_Udden](https://community.homey.app/u/Carl_Udden)\ **Post date:** [January 25, 2024, 9:52am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/118 "2024-01-25T09:52:15Z")
I have exactly the same problem. ---
**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\ **Post date:** [January 25, 2024, 7:31pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/119 "2024-01-25T19:31:27Z")
Yeah. kind of. Now it triggers every time the value changes, not only when it drops below a certain value. You’re right it it doable, I just need to keep state myself instead using some sort of “hot water is low” boolean to avoid certain parts of the flow from executing everytime the value updates. 🙂 ---
**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\ **Post date:** [January 25, 2024, 7:34pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/120 "2024-01-25T19:34:02Z")
This is the flow I used before 🙂 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/0/d01148bb04b867afd03b5f17b0e124e9c313de3c.jpeg) [Previous page](https://community.homey.app/t/app-pro-nibe-myuplink/98096.md?page=5) [Next page](https://community.homey.app/t/app-pro-nibe-myuplink/98096.md?page=7)