# \[APP\]\[PRO\] Nibe MyUplink

**URL:** <https://community.homey.app/t/app-pro-nibe-myuplink/98096>\
**Category:** Apps\
**Tags:** app, homey-pro\
**Created:** [December 16, 2023, 8:40pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096 "2023-12-16T20:40:44Z")\
**Posts on this page:** 20\
**Page:** 19

<div class="post-metadata">

**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\
**Post date:** [December 15, 2024, 9:27am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/364 "2024-12-15T09:27:48Z")

</div>

@Joost_de_Baaij - glad to hear you managed to connect your device.  
As for power, go to device settings, and make sure the “Datapoint name for power usage” is holding the name of the datapoint that measures power consumption on your device.

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/e/0e1249988259854861161f99bbfe8ab6ace61416.png)

---

<div class="post-metadata">

**Author:** ![Joost\_de\_Baaij](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joost_de_baaij/32/114526_2.png) [@Joost\_de\_Baaij](https://community.homey.app/u/Joost_de_Baaij)\
**Post date:** [December 15, 2024, 10:54am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/365 "2024-12-15T10:54:17Z")

</div>

Thanks, this was already named right, I think. It says ‘direct used power’

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/3/d38d1f1425e53501f13490e1e073ded9f8aaf28a.png)

---

<div class="post-metadata">

**Author:** ![Joost\_de\_Baaij](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joost_de_baaij/32/114526_2.png) [@Joost\_de\_Baaij](https://community.homey.app/u/Joost_de_Baaij)\
**Post date:** [December 15, 2024, 11:00am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/366 "2024-12-15T11:00:31Z")

</div>

In addition: other information is available, but ‘Power’ (“Vermogen”) not

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/5/35890700e067edefbec53bc98e65d3c4cd42644b.png)

---

<div class="post-metadata">

**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\
**Post date:** [December 15, 2024, 11:09am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/367 "2024-12-15T11:09:06Z")

</div>

You can add any datapoint you want to see by copying from “Datapoint names” to the “Datapoint name for capability xxx”:

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/e/7e8f8247fa8901ffbf0f502b83b261c02182ccb8.png)

---

<div class="post-metadata">

**Author:** ![Farside](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/farside/32/124754_2.png) [@Farside](https://community.homey.app/u/Farside)\
**Post date:** [January 9, 2025, 10:22pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/368 "2025-01-09T22:22:45Z")

</div>

> [@Goran\_Persson](#):
>
> ersion heater is currently using, unfortunattly the myuplink only show heater on or off. I complained to the myuplink team about this and they putted it on a future feature list. Beside this the F730 has no power meassure capability’s, except the BE1,2 & 3 as I understand. There is things missing after the merge to myuplink. B

Indeed, after the migration to Nibe’s MyUplink there’s no direct way to see the consumed power. I have **NIBE F750** CU 3x400V heatpump and trying to figure this out not for the first day.  
What I found out, if you go Main menu → 3. Info → 3.1 Service info → Heat meter, then you can see some of the parameters, through which technically it would be possible to calculate the power meter. While the [original documentation](https://www.nibe.eu/assets/documents/19551/331467-4.pdf) doesn’t mention this, assuming this is something that came with the new firmware and software updates.

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/d/0dc5ddfa31c9e40815a7fbe32ee602973648c97e.jpeg)

In ideal case, I’d like to achieve the slice of data with categories separation:

- **Total** Heat pump’s consumed energy in kWh;
- Energy consumed on **Heating** in kWh
  - which can be split into two subcategories as well, Int. add. heat, and separately Compressor only)

- Energy consumed on **Hot water** in kWh
  - which can be split into two subcategories as well, Int. add. heat, and separately Compressor

---

<div class="post-metadata">

**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\
**Post date:** [January 18, 2025, 5:51am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/369 "2025-01-18T05:51:06Z")

</div>

I think ideally with homey energy you’d really like them as separate devices right. 1 for hot water, 1 for heating, 1 for pool heating etc.

And the energy split across these devices depending on the mode of operation.

Actually, the only thing preventing to do this today @Gal_Carmeli would be to only map instantaneous power when it is in a specific mode right?

Energy already comes on separate data points so it would only need a setting like “only attribute power for mode x” or similar.

---

<div class="post-metadata">

**Author:** ![Wouter2](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouter2/32/79512_2.png) [@Wouter2](https://community.homey.app/u/Wouter2)\
**Post date:** [January 21, 2025, 2:34pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/370 "2025-01-21T14:34:15Z")

</div>

Hi Gal,

Haven’t talked to you in a while. Hope you’re doing well?

If you still have the time and desire to further expand the Nibe App, I have a request. The energy tab in the Homey app has recently been significantly adjusted. You can now also add large energy consumers to this overview. However, I don’t see the Nibe heat pump. This is despite the fact that I have indicated in your Nibe app that it should not be excluded from “Energy”. Is this something you can make?

greeting,  
Wouter

---

<div class="post-metadata">

**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\
**Post date:** [January 26, 2025, 9:38am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/371 "2025-01-26T09:38:03Z")

</div>

Hi guys, where do I see this Energy tab on the Homey app?  
Do I need to install the Beta version of the app? I was trying to avoid it since I prefer allowing Athom to finish their implementation before I integrate to it.

@hyper - is your post also refer to the revamped energy tab?

---

<div class="post-metadata">

**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\
**Post date:** [January 26, 2025, 7:42pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/372 "2025-01-26T19:42:41Z")

</div>

Hi @Gal_Carmeli ,

Yes, exactly. The screenshot attached is looking at top consumers (toppförbrukare in Swedish). Right now it says Nibe S-1155 (my device name), but ideally I’d like to see how much went to heating and hot water respectively.

To do that however I’d need a device that maps power and energy only to a device AND mode, not just the device.

It kinda makes sense when you think about it. Since a heat pump has multiple functions in one, eg heating, hot water, cooling, pool heating etc…

 ![IMG_9663](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/f/af024527cccdb23e6fd9d5877b0e56916be4681f.png)

Ps. Yes, beta version of the app and OS 12.0+ I believe.  
Ds.

---

<div class="post-metadata">

**Author:** ![Wouter2](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouter2/32/79512_2.png) [@Wouter2](https://community.homey.app/u/Wouter2)\
**Post date:** [February 3, 2025, 3:08pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/373 "2025-02-03T15:08:08Z")

</div>

Hi Gal, it is indeed about the energy tab which is visible in the beta version of the app. I don’t see the Nibe S-1155 at all. In any case, the picture of Hyper, with the top consumers, still shows the Nibe. I don’t see the Nibe in the overview at all. greetings W

---

<div class="post-metadata">

**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\
**Post date:** [February 3, 2025, 3:30pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/374 "2025-02-03T15:30:03Z")

</div>

Hey @Wouter2

That’s because I used power by the hour to create a secondary device for energy 🙂

---

<div class="post-metadata">

**Author:** ![Luuk\_Busschers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/luuk_busschers/32/120779_2.png) [@Luuk\_Busschers](https://community.homey.app/u/Luuk_Busschers)\
**Post date:** [February 6, 2025, 10:23am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/375 "2025-02-06T10:23:46Z")

</div>

Hi All,

Great to see such an active community, and @Gal_Carmeli what a great work this app!

I have done some reading here but couldn’t find a solution for which I am searching, maybe it is already somewhere in this topic but couldn’t find is.

I have a dynamic energy contract and like to use the energy when it is cheap. My idea is to set the heat temperature high when the energy is cheap and make is somewhat lower when the energy is expensive.

Currently my system (VVM320) is in the luxe mode which means the temperature is between 53 and 58 degrees.

I think there are two possibilities:

1. Change the temperature (range) depending on the energy price, question on this one is which parameter should I change to make this succesfull?

2. Change the mode, so set a normal mode when the price is high and the luxe mode when the price is low. Question on this one, should I then set the Temporary in Luxe datapoint? Because it is temporary, i’d like to have it in luxe until i set it back to the normal mode.

Or are there any other suggestions for me which are more easy or better?

Many thanks in advance for the answers.

---

<div class="post-metadata">

**Author:** ![Ivo\_Bekkers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ivo_bekkers/32/81318_2.png) [@Ivo\_Bekkers](https://community.homey.app/u/Ivo_Bekkers)\
**Post date:** [February 10, 2025, 5:29pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/376 "2025-02-10T17:29:32Z")

</div>

I have the same issue, can’t find the actual power. In a other app (Nibe S-series) it automatically works but can’t see it in the energie

---

<div class="post-metadata">

**Author:** ![Gal\_Carmeli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gal_carmeli/32/80553_2.png) [@Gal\_Carmeli](https://community.homey.app/u/Gal_Carmeli)\
**Post date:** [February 27, 2025, 10:55am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/377 "2025-02-27T10:55:52Z")

</div>

All - Sorry for my late response - I have been busy with some personal issues lately.

@hyper @Wouter2 @Ivo_Bekkers and others who are interested in the new energy tab -  
I did a bit of a research, and I understand how to add the Nibe devices to the energy tab. Unfortunately, it’s not a trivial implementation, and it will take me some time to implement this (my availability during this period is not very high).  
I hope i can get to it soon, but I can not commit on any ETA.  
I will update this forum once its implemented.

---

<div class="post-metadata">

**Author:** ![To\_Lou](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/to_lou/32/79159_2.png) [@To\_Lou](https://community.homey.app/u/To_Lou)\
**Post date:** [July 29, 2025, 8:45am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/378 "2025-07-29T08:45:00Z")

</div>

In order to update and find potentially added Data point names, do I have to remove heat pump device and reinstall it from scratch?

What happens to existing flows and dependencies, do I have to reconfige them also?

---

<div class="post-metadata">

**Author:** ![To\_Lou](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/to_lou/32/79159_2.png) [@To\_Lou](https://community.homey.app/u/To_Lou)\
**Post date:** [July 29, 2025, 1:07pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/379 "2025-07-29T13:07:35Z")

</div>

> [@Krisstenswe](#):
>
> However, the second data point “status:”, parameter id 50095, behaves as described in the JSON file, ie;  
> “value”: “15000”, “text”: “starts”,  
> “value”: “15001”, “text”: “runs”,  
> “value”: “15003”, “text”: “off”,  
> “value”: “15004”, “text”: “hot water”,  
> “value”: “15005”, “text”: “heating”,  
> and so on…

Would be great to have yet another ‘Datapoint text’ tag available besides Datapoint value to be able to read the clear text of the datapoint as well.

Proper field to use would be ‘strVal’, I think.

```auto
"category": "F370 CU 3x400V",
    "parameterId": "50005",
    "parameterName": "In­creased venti­lation",
    "parameterUnit": "",
    "writable": true,
    "timestamp": "2025-07-04T20:13:44+00:00",
    "value": 0,
    "strVal": "off",
    "smartHomeCategories": [
      "sh-ventBoost"
    ],
    "minValue": null,
    "maxValue": null,
    "stepValue": 1,
    "enumValues": [
      {
        "value": "0",
        "text": "off",
        "icon": ""
      },
      {
        "value": "1",
        "text": "on",
        "icon": ""
      }
    ],
```

Thx

---

<div class="post-metadata">

**Author:** ![Krisstenswe](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krisstenswe/32/13447_2.png) [@Krisstenswe](https://community.homey.app/u/Krisstenswe)\
**Post date:** [July 30, 2025, 2:16pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/380 "2025-07-30T14:16:26Z")

</div>

I also think this would have been good and have suggested this to Gal in a previous post and got the reply;

> [@Gal\_Carmeli](#):
>
> I guess the main problem of this is the fact that I need all my datapoints to be numeric. I have many places in which you can numerically work on a datapoint capability (for example, a condition saying if the value is larger than X), and therefore - I can not put any text to these capabilities values in case of a pre-defined value.

---

<div class="post-metadata">

**Author:** ![To\_Lou](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/to_lou/32/79159_2.png) [@To\_Lou](https://community.homey.app/u/To_Lou)\
**Post date:** [August 12, 2025, 12:17pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/381 "2025-08-12T12:17:38Z")

</div>

Really missing the 3.3 Menu items for my F370  
in the listed data points, could it be added? Specifically the status datapoint should hold addition/heater power if activated.  
It’s there on the Myuplink website.

 ![Screenshot_20250812_141002_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/0/e05eda966be3d25b2d53378f005aad4cb62ffcbc.jpeg)  
 ![Screenshot_20250812_135856_Chrome](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/5/e5dc3f5348f10d9f31bde138da0916a486c82fd2.jpeg)

---

<div class="post-metadata">

**Author:** ![Maik\_van\_Rens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/maik_van_rens/32/120764_2.png) [@Maik\_van\_Rens](https://community.homey.app/u/Maik_van_Rens)\
**Post date:** [October 3, 2025, 9:26am UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/382 "2025-10-03T09:26:16Z")

</div>

![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/0/b061f58f9c6332d735654e7edde421947cb08e47.png)

Can the value for actual power usage be multiplied by 1000 in order to get the power in Watt?

---

<div class="post-metadata">

**Author:** ![Pantera\_Ruber](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pantera_ruber/32/7091_2.png) [@Pantera\_Ruber](https://community.homey.app/u/Pantera_Ruber)\
**Post date:** [October 3, 2025, 6:44pm UTC](https://community.homey.app/t/app-pro-nibe-myuplink/98096/383 "2025-10-03T18:44:07Z")

</div>

Does anyone know how to get the defrosting state of a S2125?

The reason I am asking is that I would like to open room thermostats that are closed (and vice versa) when defrosting so that heat is used in the best way.

Thanks to the LK app I can do this with my LK Arcs.

[Previous page](https://community.homey.app/t/app-pro-nibe-myuplink/98096.md?page=18)

[Next page](https://community.homey.app/t/app-pro-nibe-myuplink/98096.md?page=20)