# \[APP\]\[Pro\] myVaillant - Comfort for your home **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro, community-app\ **Created:** [February 17, 2025, 8:49pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895 "2025-02-17T20:49:00Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![Pallieter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pallieter/32/79854_2.png) [@Pallieter](https://community.homey.app/u/Pallieter)\ **Post date:** [February 22, 2025, 10:39am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/41 "2025-02-22T10:39:03Z")
Fixed the bug of temperature jumping back after a few seconds in homey in version 1.6.1 šŸ˜‰ ---
**Author:** ![Dracoignis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dracoignis/32/17161_2.png) [@Dracoignis](https://community.homey.app/u/Dracoignis)\ **Post date:** [February 22, 2025, 11:19am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/42 "2025-02-22T11:19:18Z")
This morning v1.3.3 crashed a lot, i found that it always happened after enable the logging and restarting. After clean install and not enabling the logging it wouldt crash anymore. Just tested version 1.5.2, i cant set the heating mode anymore trough the device. Yesterday on version(v1.2.?) it worked. flowcard was available and didnt work either. When i do this the zone goes from orange to black, but after 3 secconds its back in orange. So o guess that its the same problem with the temperature and it wil be fixed with your version 1.6. Reading Outsidetemperature by adding a nonexisting heatpump works. Edit: just found out that on v1.3.3 when i deactivate my heating on the thermostat itself, i can reactivate by using the card ā€œannuleer handmatig ingestelde temperatuurā€ ---
**Author:** ![semolex](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/semolex/32/124504_2.png) [@semolex](https://community.homey.app/u/semolex)\ **Post date:** [February 23, 2025, 6:51am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/43 "2025-02-23T06:51:46Z")
During the test I noticed following issue: ![IMG_5453](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/4/b4d534221563b6ed0599a50b07dd242df6a5000a.jpeg) ---
**Author:** ![Pallieter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pallieter/32/79854_2.png) [@Pallieter](https://community.homey.app/u/Pallieter)\ **Post date:** [February 23, 2025, 7:26am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/44 "2025-02-23T07:26:07Z")
Must be some endless loop, memory usage is normal. CPU should be every minute a small spike of 10% usage. I this still happening? Could you send a homey diagogstic support (app \> settings \> make diagonstic report) ---
**Author:** ![Melvinius](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/melvinius/32/124954_2.png) [@Melvinius](https://community.homey.app/u/Melvinius)\ **Post date:** [February 23, 2025, 9:43am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/45 "2025-02-23T09:43:58Z")
Thanks. How do update to the newest version? When I look in the app store, it shows 1.3.3 as newest version. It doesnā€™t automatically update either. ---
**Author:** ![Pallieter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pallieter/32/79854_2.png) [@Pallieter](https://community.homey.app/u/Pallieter)\ **Post date:** [February 23, 2025, 3:16pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/46 "2025-02-23T15:16:11Z")
The stable version is in review before it is available for everyone. You can install the test version, this will be updated when I upload a new version: > **[myVaillant](https://homey.app/nl-nl/app/com.factory76.vaillant/myVaillant/test/)** > > Mijn huis, mijn comfort ---
**Author:** ![semolex](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/semolex/32/124504_2.png) [@semolex](https://community.homey.app/u/semolex)\ **Post date:** [February 23, 2025, 8:40pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/47 "2025-02-23T20:40:09Z")
I am temporarily disabled app since Homey reloaded few times Will grab a logs if issue persist Thanks! ---
**Author:** ![Dracoignis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dracoignis/32/17161_2.png) [@Dracoignis](https://community.homey.app/u/Dracoignis)\ **Post date:** [February 24, 2025, 10:04am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/48 "2025-02-24T10:04:24Z")
Currently testing v1.6.2. When i make changes in the homey on the device in temperature, the thermostat reacts after 10 secconds. When i change this screen it doesnt reacts. ![IMG_0670](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/2/e2abb810645610c5b49f2b9cc4dbb9c5794a0660.jpeg) I tried the flowcard to change the heatingmode, but i also get no reaction. Currently i solved this in the flow by using ā€œset a temperatureā€ , and ā€œcancel temperatureā€ with a delay of 10 secconds. The jumping back to previous temperature is solved. I also noticed on insights that when i activate one day away on my thermostat that the set temerature stays the same, but i guess thats something in the Vaillant-enviroment. ---
**Author:** ![Paul\_Scholte](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul_scholte/32/16562_2.png) [@Paul\_Scholte](https://community.homey.app/u/Paul_Scholte)\ **Post date:** [February 24, 2025, 2:20pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/49 "2025-02-24T14:20:03Z")
In Dutch we have a saying ā€œ lang gewacht en stil gezwegen, nooit gedacht en toch gekregenā€˜. I am a happy man. Thank you for developing this long-awaited appā€¦ Kind regards, Paul ---
**Author:** ![TimVW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/timvw/32/79069_2.png) [@TimVW](https://community.homey.app/u/TimVW)\ **Post date:** [February 25, 2025, 10:54am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/50 "2025-02-25T10:54:09Z")
I can now see the outside temp. Thanks for that! Is it possible to add the outside temp in the flowcards voor the VR921 so I can use it as an outside temp sensor to activate other flows? regards, Tim ---
**Author:** ![semolex](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/semolex/32/124504_2.png) [@semolex](https://community.homey.app/u/semolex)\ **Post date:** [February 25, 2025, 12:19pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/51 "2025-02-25T12:19:28Z")
How did you enabled it? I do not see any sensors except a humidity. Or it is part of Heat Pump? Sorry for silly questions Currently I am using proxy from HomeAssistant to compare. And it has domestic water as well as my `recoVair` ā€œdomestic ventilation system (duct system)ā€ - though it is not quite correctly shows what I can do with it, but having ability to ā€œboostā€ vent is enough. I can also see a water pressure in the system as well. I think I am using the latest version of an app. Examples: ![Screenshot 2025-02-25 at 14.23.37](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/f/9f86b1b3b0617bbfe13cb17b7198ec54f0b714fc.png) ![Screenshot 2025-02-25 at 14.23.44](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/d/dd30056a2a892b43ceb0b574ab52846751e1e360.png) ![Screenshot 2025-02-25 at 14.23.58](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/b/fb3ab78a3203107b4a73df34dc0b11902cdfb546.png) ---
**Author:** ![Pallieter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pallieter/32/79854_2.png) [@Pallieter](https://community.homey.app/u/Pallieter)\ **Post date:** [February 25, 2025, 5:00pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/52 "2025-02-25T17:00:09Z")
Thanks for your feedback, I think that I know what the issue is. I guess you have a VRC 700 thermostat? Iā€™ve tried to fix this in version 1.6.4, but because I have a different thermostat not able to verify if this change fixes the mode change issue. Also added error feedback to the action cards. The actions cards where always succesfull, also on a failed api call ---
**Author:** ![Pallieter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pallieter/32/79854_2.png) [@Pallieter](https://community.homey.app/u/Pallieter)\ **Post date:** [February 25, 2025, 5:04pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/53 "2025-02-25T17:04:05Z")
He, the outside temp is indeed part of the heat-pump. Will rename this to a more generic term, because I see it also works with other types of heating source than heat pumps. But for now you could add youā€™re setup as a heatpump. The domestic water options and water pressure are also available in the ā€˜heatpumpā€™ device. For domestic water it is not yet possible to set the mode, but setting a the temperature is possible The recoVair/duct system is not added yet. Will focus first on getting all heating functions working šŸ™‚ ---
**Author:** ![Pallieter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pallieter/32/79854_2.png) [@Pallieter](https://community.homey.app/u/Pallieter)\ **Post date:** [February 25, 2025, 5:07pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/54 "2025-02-25T17:07:19Z")
Will add flow cards for the outside temp ---
**Author:** ![semolex](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/semolex/32/124504_2.png) [@semolex](https://community.homey.app/u/semolex)\ **Post date:** [February 25, 2025, 5:15pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/55 "2025-02-25T17:15:59Z")
I have outside temp as part of VRC720 and Domestic water as well I think this data should be available from API. I am not using heat pump BTW, just a condenser gas boiler I can share any response if needed šŸ™‚ ---
**Author:** ![Dracoignis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dracoignis/32/17161_2.png) [@Dracoignis](https://community.homey.app/u/Dracoignis)\ **Post date:** [February 25, 2025, 6:03pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/56 "2025-02-25T18:03:36Z")
Yes, i have the vrc700. Ill try your latest version as soon as i can and keep you informed. ---
**Author:** ![semolex](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/semolex/32/124504_2.png) [@semolex](https://community.homey.app/u/semolex)\ **Post date:** [February 25, 2025, 9:58pm UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/57 "2025-02-25T21:58:09Z")
![IMG_5529](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/0/6041ade3b3966b33a1cc7d53e52ec1161a4942d3.jpeg) Got a new entity, thanks! I cannot set a domestic water temp anywhere, will enable logs Edit: d0840902-ade5-4d88-aef3-94dbbddce931 ---
**Author:** ![sschot](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sschot/32/116924_2.png) [@sschot](https://community.homey.app/u/sschot)\ **Post date:** [February 26, 2025, 12:07am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/58 "2025-02-26T00:07:39Z")
![2025-02-26_01h05_47](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/7/475100fd2277938f7f83bd19701f6d9278482125.jpeg) When I use the cart ā€œStel warm water in opā€¦ā€ the minimum setting is 35 degrees Celcius. Is this the ā€œtapwaterā€ or the ā€œCV waterā€ temperature? When it is CV water, why it is not possible to set below 35? Of course the thing I like to create is a manual setup for the ā€œstookcurveā€ ![Screenshot (26 feb 2025 01 08 14)](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/9/4958062bd2c1044a7885ba0291a9777acb17ed5a.png) Of course the most convenient solution is to ā€œset the outside temperatureā€ and Vaillant just start to use the build in ā€œstookcurveā€ ---
**Author:** ![Pallieter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pallieter/32/79854_2.png) [@Pallieter](https://community.homey.app/u/Pallieter)\ **Post date:** [February 26, 2025, 8:14am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/59 "2025-02-26T08:14:34Z")
This is currently only possible trough flow actions cards. Not sure if you want to change the hot water temperature in the Homey UI? It is not something you often want to change on demand right? ---
**Author:** ![Pallieter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pallieter/32/79854_2.png) [@Pallieter](https://community.homey.app/u/Pallieter)\ **Post date:** [February 26, 2025, 8:17am UTC](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895/60 "2025-02-26T08:17:53Z")
The ā€œwarm waterā€/ā€œhot waterā€ setting is for tap/domestic hot water. The Central Heating temp is not yet possible in a flow card. Was looking in to this. I have to add a new device type for that, because 1 heating system can supply more than 1 heating circuit. So there is a one to many relation. Will take some more time to implement this šŸ™‚ [Previous page](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895.md?page=2) [Next page](https://community.homey.app/t/app-pro-myvaillant-comfort-for-your-home/130895.md?page=4)