# \[APP\]\[Pro\] myIO - Heating, lighting and blinds from your myIO controller

**URL:** <https://community.homey.app/t/app-pro-myio-heating-lighting-and-blinds-from-your-myio-controller/162241>\
**Category:** Apps\
**Created:** [November 14, 2026, 8:35pm UTC](https://community.homey.app/t/app-pro-myio-heating-lighting-and-blinds-from-your-myio-controller/162241 "2026-11-14T20:35:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![szuperp](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/szuperp/32/47661_2.png) [@szuperp](https://community.homey.app/u/szuperp)\
**Post date:** [November 14, 2026, 8:35pm UTC](https://community.homey.app/t/app-pro-myio-heating-lighting-and-blinds-from-your-myio-controller/162241/1 "2026-11-14T20:35:08Z")

</div>

Hi all,

This is the support topic for the **myIO** app: [myIO | Homey](https://homey.app/a/com.myioserver.integration/)

### What is myIO?

myIO is a central home controller, developed in Hungary by myIO Smart Home Zrt. It sits on a DIN rail in the distribution cabinet and runs heating and cooling, lighting, blinds, gates and energy in one system. It works on its own, without the internet or a cloud: the timers, the automations and the heating control run on the controller. Homey is an extra on top, not a requirement.  
More: [myIO – The home that grows with you.](https://myio.hu/en/)

### What the app does

You install it on your Homey Pro (on the same network as myIO), enter the address of your myIO and a user, then pick which devices to bring over:

- on/off outputs and dimmable lamps
- RGB lights (colour LED strips)
- thermostats, one per heating or cooling zone
- blinds (up / stop / down)
- temperature and humidity sensors, and on V4 the universal sensors
- the energy meter

In Homey Flows they work together with your other devices: if Homey’s weather app reports wind, for example, it can pull up the awning wired to myIO. There is also a Flow card for sending any myIO command.

It works with every myIO: V3, V4 GIGA and V4 Opta.

### Good to know

- Homey sees only what its myIO user has rights to. It is worth creating a separate user for Homey on myIO.
- A blind is a lockout pair on myIO (UP direction first); its name in Homey is the common part of the two output names.
- An RGB light is a myIO group whose name starts with “RGB”, with channels whose names start with R, G and B.

### Support

Questions, bug reports and ideas: here in this topic, or through [Contact · myIO](https://myio.hu/en/contact).  
For a problem, please write the app version, your myIO model and firmware version, and what you expected to happen.