# \[APP\]\[Pro\] myAudi - Connect your Audi EV or PHEV **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [May 30, 2026, 2:51pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543 "2026-05-30T14:51:07Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [May 30, 2026, 2:51pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/1 "2026-05-30T14:51:07Z")
* * * **Control and monitor your Audi directly from Homey. Flows, automations, live data — all without lifting a finger.** * * * ## What is this app? **myAudi** connects your Audi electric or plug-in hybrid vehicle to Homey via the official Cariad API (the same backend used by the myAudi app). No cloud subscription beyond your existing myAudi account is required. The app runs entirely **locally on Homey Pro** — no additional cloud services, no extra fees. * * * ## Supported vehicles | Driver | Examples | | --- | --- | | 🔋 **Audi – Electric (BEV)** | Q4 e-tron, Q6 e-tron, Q8 e-tron, e-tron 55, A6 e-tron | | ⚡ **Audi – Hybrid (PHEV)** | Q7 TFSI e, Q5 TFSI e, A6 TFSI e, A8 TFSI e | Tested on both the **WCAR** (2024+ models) and **MBB\_ODP** (older e-tron, Q7/Q8) platforms. Available features depend on your vehicle model and connected services package. * * * ## What can it do? ### 📊 Monitor - Battery level (SOC %), range, charging state, plug status - Fuel level & total range (PHEV) - Electric range, charge power, charge rate - Outside & battery temperature - Location, is home (geofencing), is moving - Lock status, inspection due, odometer - Charging profile, charge target, battery care mode ### 🎮 Control (remote commands, auto-detected per vehicle) - Start / stop pre-climatisation - Start / stop ventilation - Window heating - Flash headlights / Flash & Honk - Start / stop charging - Set charge target (50–100 %) - Set climatisation temperature - Lock / Unlock _(S-PIN required)_ - Force refresh ### 🔁 Flows - **Triggers:** charging started/stopped, plug connected/disconnected, car arrived/left home, battery below threshold, climatisation started/stopped, range changed, API error, and many more - **Conditions:** battery below X %, range below X km, charge target is X %, is charging/climatising/home/moving - **Actions:** all remote commands above, plus set update interval * * * ## Smart features **Adaptive polling** — When your car is sleeping the poll interval slows down automatically (up to 90 min) to protect your 12V battery. It speeds back up as soon as fresh data arrives. **Debug Log** — A built-in live log tab in app settings lets you diagnose issues without needing the Homey CLI. **API Helper** — Test your credentials and inspect raw API data directly from the Homey app settings. **Battery & Range Indicator tags** — Two hidden string capabilities (`SOC: 80%` and `160km SOC: 80%`) are available as flow tags for use in widgets and advanced flows. * * * ## Setup 1. Install **myAudi** from the Homey App Store 2. Add a device — select **Audi – Electric** or **Audi – Hybrid / PHEV** 3. Enter your myAudi email and password 4. Enter your 4-digit **S-PIN** (required for lock/unlock — leave empty if not needed) 5. Done — the app auto-detects all features supported by your vehicle * * * ## Requirements - Homey Pro (local platform only) - Homey firmware ≥ 12.4.5 - myAudi account with active connected services subscription * * * ## Links - 🔗 [GitHub](https://github.com/andiwirz/com.audi.etron) - 🐛 [Report an issue](https://github.com/andiwirz/com.audi.etron/issues) - 🍺[Buy me a beer](https://www.paypal.com/paypalme/AndiWirz) ## Installation > **[myAudi | Homey](https://homey.app/de-ch/app/com.audi.etron/myAudi/test/)** > > Audi Elektro- oder Hybridfahrzeug mit Homey verbinden * * * ## Looking for testers! If you have an Audi that isn’t listed above, I’d love to hear from you. Share the output of the **API Helper** tab (credentials are not included) and I’ll check what can be supported. _Based on [com.vag.core](https://github.com/martijnpoppen/com.vag.core) by martijnpoppen — thank you for the foundation!_ ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [May 30, 2026, 3:22pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/2 "2026-05-30T15:22:52Z")
Congrats on the release. I was a bit surprised to see a separate app emerge from my work, mainly because I would have been happy to discuss a transfer if you’d reached out. Since I’d already deprecated the apps and hidden them from the App Store, that could have been a straightforward conversation. → [MyAudi | Homey](https://homey.app/en-us/app/de.myaudi.mobile.assistant/MyAudi/) Of course, the code is open source and you’re free to build on it. I guess I would have appreciated a heads-up beforehand, especially given how closely the project is related to the original work. That said, I appreciate the credit to `com.vag.core` and the mention in the announcement. It’s good to see the project continuing for Audi EV users, and I wish you success with it. PS: if you think transfer is a good idea, let me know and i’ll transfer repo and app to you ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [May 30, 2026, 7:51pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/3 "2026-05-30T19:51:57Z")
Hi martijnpoppen, Thank you for reaching out — and for your kind words You’re absolutely right, and I apologise for not getting in touch beforehand. That was an oversight on my part. I should have reached out before writing this post, especially given how directly the project builds on your work. I’m glad you’ve taken it well. Regarding the transfer: thank you for the generous offer. I’d prefer to keep it as my own project **for now (I might come back to you on the offer)** — I wanted to start small and fully concentrate on Audi EVs, and honestly, taking over an app with a large existing installation base and active drivers feels like too much responsibility at this stage. It’s part of the learning experience for me. Thanks again for the gracious response — and for building the foundation that made this possible. Andi ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 5:33pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/4 "2026-05-31T17:33:22Z")
more than glad to start testing, as my audi stopped communicating with @martijnpoppen 's version as of 2 days ago… install and adding the car went smooth. all data visible, so connection being made. actions is more difficult: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/3/93bd3240e35a134f270fb742de59e62966cc9e32.jpeg) Also not able to turn on the horn and lights yet. First steps important, as I can read out the status of the battery again! thanks! ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [May 31, 2026, 5:53pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/5 "2026-05-31T17:53:28Z")
**Thanks for testing — great to hear the data is coming through smoothly.** The _“Missing Capability Listener”_ issue is already fixed for the next release. It was caused by the V3 climatisation button being registered after the initial listener setup. To fine‑tune support for your setup, could you let me know **which car model you’re using** and send me the API data via **PM** from: **App Settings → API Helper → Login and Retrieve API Data → Copy Data** Thank you! ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 5:58pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/6 "2026-05-31T17:58:04Z")
will do. one note: I am missing the tag, battery target ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 6:03pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/7 "2026-05-31T18:03:10Z")
and @martijnpoppen again, thanks for your version up to now, as it enabled me to pre temp my car, set the battery according to my agenda schedule and a couple of others, used it a lot and very thankfull! ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [May 31, 2026, 6:16pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/8 "2026-05-31T18:16:13Z")
> [@Patrick\_Van\_Deursen](#): > > one note: I am missing the tag, battery target by tag you mean the functionallity to change it in flows or see insights? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/3/a3aa5780b6e91f8f71245193d3dddf4e9ea4fc05.png) ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 6:19pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/9 "2026-05-31T18:19:41Z")
to see what the status is of the target. setting the target i found indeed ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [May 31, 2026, 6:24pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/10 "2026-05-31T18:24:31Z")
Should be here: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/2/42ba2ff63185d5077902de8ce4f000efe1e8995c.png) ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 6:25pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/11 "2026-05-31T18:25:54Z")
in the tags, to use it in my flows 😉 ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [May 31, 2026, 6:33pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/12 "2026-05-31T18:33:39Z")
Please update to version 1.0.32 ([myAudi EV | Homey](https://homey.app/de-ch/app/com.audi.etron/myAudi-EV/test/)) and let me know if it works. ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 6:55pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/13 "2026-05-31T18:55:52Z")
Installed Version 1.033. cant find it here yet. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/1/4103858b70d0bfbe15cb5e37c4d87f42b431e416.png) ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 7:56pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/14 "2026-05-31T19:56:12Z")
aaah, got it. its text, not a number 🙂 ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 8:06pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/15 "2026-05-31T20:06:13Z")
target setting does not run smoothely yet. my audi doesnt accept the setting from the homey app, and whe I set the target to a different number in the audi app, the target doesnt change in the homey app… Maybe you need to convert it to a number iso text? ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [May 31, 2026, 8:19pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/16 "2026-05-31T20:19:40Z")
Internally the charge target is stored as a number — but a **picker** (“80 %”, “90 %”…) looks much nicer than a plain slider, so I kept it as a dropdown. For your use case in **Homey Logic** (“Number is greater than…”), I’ve added a hidden companion capability that mirrors the same value as a plain number. It won’t show up in your device tile, but it will appear as a numeric tag `[[Charge target (number)]]` in flows — so you can do comparisons like `> 80` without any workaround. Please update to **v1.0.37** to get this and a few other flow fixes. * * * One heads-up: the Audi API is unfortunately quite slow — setting the target SOC typically takes **~2 minutes** to be confirmed by the car. The picker may briefly show the old value during that window; this is expected and will correct itself on the next sync. If the command doesn’t seem to go through at all, please **create a diagnostic report** (under settings of my app) — that way I can check for any error messages in the logs. ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [May 31, 2026, 8:22pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/17 "2026-05-31T20:22:12Z")
thanks! will test, and indeed it has become very slow. in the past if in the app I turned on honk and lights, it would go immediately, now it took more than a minute indeed… Will take it into account in my flows. thanks ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [May 31, 2026, 8:47pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/18 "2026-05-31T20:47:20Z")
With the newest version - it works: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/a/8a31a863cfd3b27964362818cb50064117a6b259.png) ---
**Author:** ![Patrick\_Van\_Deursen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_van_deursen/32/56539_2.png) [@Patrick\_Van\_Deursen](https://community.homey.app/u/Patrick_Van_Deursen)\ **Post date:** [June 1, 2026, 7:53pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/19 "2026-06-01T19:53:00Z")
works! thanks 👌 ---
**Author:** ![Andi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andi/32/160466_2.png) [@Andi](https://community.homey.app/u/Andi)\ **Post date:** [June 1, 2026, 9:15pm UTC](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543/20 "2026-06-01T21:15:19Z")
Great! Were you able to test the other functions as well? [Next page](https://community.homey.app/t/app-pro-myaudi-connect-your-audi-ev-or-phev/155543.md?page=2)