# \[APP\]\[Pro\] Misol and Ecowitt (Release 0.2.34, Test 0.2.35 ) **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [May 5, 2021, 12:34am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076 "2021-05-05T00:34:21Z")\ **Posts on this page:** 11\ **Page:** 33
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [August 31, 2026, 9:37am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/656 "2026-08-31T09:37:46Z")
Maybe the time zone in the gateway is incorrect. You can set this in the Ecowitt smartphone app (I don’t mean the WSView Plus app) as follows: _ **Weather station home screen → 3 dots in the upper right corner → Device settings → Time zone** _ You should also enable the “Auto Daylight Saving Time” feature. ![Bildschirmfoto 2026-08-31 um 11.34.53](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/3/8381c7e7643e96a41bdd87041a116c64f2eadbf2.png) ---
**Author:** ![Michiel\_Reijnen-Smit](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/michiel_reijnen-smit/32/113075_2.png) [@Michiel\_Reijnen-Smit](https://community.homey.app/u/Michiel_Reijnen-Smit)\ **Post date:** [September 15, 2026, 9:58pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/657 "2026-09-15T21:58:55Z")
Hi Adrian, I’m having a problem adding a WittFlow WFC01 to the Misol and Ecowitt Homey app. My setup: - Ecowitt GW2000 - 3 × WittFlow WFC01 - Homey - Misol and Ecowitt app v0.2.33 All three WFC01 devices are correctly paired with the GW2000 and are visible under: GW2000 → IOT Devices In Homey, I can select: **Misol and Ecowitt → WittFlow WFC01** However, when I try to add the WFC01, it fails with this error: **Cannot read properties of undefined (reading “command”)** I have tried turning the water timers on/off while Homey is searching, but this makes no difference. The GW2000 and the other Ecowitt devices are working correctly with Homey. Could you please check whether there is a problem with the WFC01 driver/device pairing in the current version? I can provide screenshots or logs if needed. Thanks! M Reijnen-Smith ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 15, 2026, 11:34pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/658 "2026-09-15T23:34:03Z")
I have published a new version. Let me know if it still fails. ---
**Author:** ![Stefan\_Doring](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stefan_doring/32/115932_2.png) [@Stefan\_Doring](https://community.homey.app/u/Stefan_Doring)\ **Post date:** [September 17, 2026, 10:14am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/659 "2026-09-17T10:14:30Z")
Hi @Adrian_Rockall Since version 0.2.34, I’ve been getting “rain” error messages. I set up the current rain event (is it raining: yes/no) as a trigger to close the roller shutter when a window is open (an AND condition). Now the shutter keeps going down, even though it isn’t raining. Several times a day. I can see in the app that the rain status was updated at that moment—but it hadn’t been raining beforehand; it hadn’t rained for hours. The value updates without an actual rain event, yet it still triggers the action. Is this a bug, or do I need to change my flow? Edit: For a few weeks, I had a similar problem with “wind.” (In May above) The awning retracts when the wind exceeds a certain level. I encountered “fake wind” issues here as well and had to extensively reconfigure the flow. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 17, 2026, 11:20am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/660 "2026-09-17T11:20:16Z")
In the time line do you see events fot it started raining? ![1000018792](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/0/906daf3b229e9e8b785abab1678f0e1c673195b2.jpeg) ---
**Author:** ![Stefan\_Doring](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stefan_doring/32/115932_2.png) [@Stefan\_Doring](https://community.homey.app/u/Stefan_Doring)\ **Post date:** [September 17, 2026, 11:33am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/661 "2026-09-17T11:33:19Z")
Yes. But there was no rain. The sun ist shining. ![1000070578](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/6/761b7c1da6dd1a820cd6d713a2266d79b7aff482.jpeg) ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 17, 2026, 3:51pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/662 "2026-09-17T15:51:08Z")
So, either the sensor is sending the data that way or I have a decoding bug. I am going to add some extra logging to capture the actual data from the device so we can check what is being sent. I will let you know when a test version is ready. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 19, 2026, 1:01pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/663 "2026-09-19T13:01:08Z")
I have published a new test version that logs all the data received from the gateway. You will need to turn the logging option on in the app settings. Then as soon as you see a false rain started report, go back to the log page and send the log. ---
**Author:** ![Austriacus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/austriacus/32/75331_2.png) [@Austriacus](https://community.homey.app/u/Austriacus)\ **Post date:** [September 20, 2026, 3:50pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/664 "2026-09-20T15:50:26Z")
Hello Can anybody confirm **GW2001: WS90+Gateway 2000** is working with homey? Thank you Peter ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [September 20, 2026, 5:58pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/665 "2026-09-20T17:58:51Z")
Yes, that’s one of the setups I have. ---
**Author:** ![Michiel\_Reijnen-Smit](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/michiel_reijnen-smit/32/113075_2.png) [@Michiel\_Reijnen-Smit](https://community.homey.app/u/Michiel_Reijnen-Smit)\ **Post date:** [September 22, 2026, 10:28am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/666 "2026-09-22T10:28:38Z")
Thanks for the solution, it’s working perfectly now. I do have another question for you, though. Is it possible to add the Ecowitt AC1100 smart plug to the app as well? I want to use it for my irrigation system, but I can’t find it in Homey to create flows for it. Please let me know if this is possible. Also, if I haven’t posted this question in the right place, where should I ask it instead? Kind regards, M. Reijnen-Smith [Previous page](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076.md?page=32)