# \[APP\]\[Pro\] Misol and Ecowitt (Release 0.2.34, Test 0.2.35 ) **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [May 5, 2021, 12:34am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076 "2021-05-05T00:34:21Z")\ **Posts on this page:** 20\ **Page:** 32
**Author:** ![Hsd1965](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hsd1965/32/30160_2.png) [@Hsd1965](https://community.homey.app/u/Hsd1965)\ **Post date:** [May 27, 2026, 2:50pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/635 "2026-05-27T14:50:37Z")
As a workaround you could just trigger a logic check if the solar power becomes greater than 600 every minute. ---
**Author:** ![B3rt](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/b3rt/32/9435_2.png) [@B3rt](https://community.homey.app/u/B3rt)\ **Post date:** [May 27, 2026, 7:54pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/636 "2026-05-27T19:54:09Z")
work around is fine, but looking for a good solution, a native trigger was best solution. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [May 27, 2026, 7:56pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/637 "2026-05-27T19:56:21Z")
Working on it now, should be in test soon. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [May 28, 2026, 11:40am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/638 "2026-05-28T11:40:11Z")
Test version is in the store. ---
**Author:** ![Lasse\_dk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lasse_dk/32/166506_2.png) [@Lasse\_dk](https://community.homey.app/u/Lasse_dk)\ **Post date:** [June 8, 2026, 8:35am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/640 "2026-06-08T08:35:07Z")
Hi @Adrian_Rockall Is there any compability with the pool thermometer WN36? [WN36 Pool Thermometer](https://shop.ecowitt.com/products/wn36?variant=42363921629346) ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [June 8, 2026, 8:57am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/641 "2026-06-08T08:57:34Z")
It looks like it should be possible. If you have one already connected to a gateway, could you open the app settings and send the Detected log using the Send Log button. ---
**Author:** ![Willem59](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem59/32/16860_2.png) [@Willem59](https://community.homey.app/u/Willem59)\ **Post date:** [June 14, 2026, 2:25pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/642 "2026-06-14T14:25:11Z")
Hi Adrian (or someone who has an idea), I have an Ecowitt 2000 hub, a Wittboy WS and a seperate moister/temp sensor. All works fine till now. I try to add a few WH51 soil-moisture sensors, but that does not work. The Soil sensora are vivsible in the Ecowitt app, so they are is paired to the Ecowitt hub. In Homey 2023 I ckick on “new device”, klick on ""Misol and Ecowitt"app and choose the soil moisture sensor and than the searching never stops. Nothing happens. What could I do wrong? Dit I miss something? Thank, Willem van Oorschot ---
**Author:** ![Willem59](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem59/32/16860_2.png) [@Willem59](https://community.homey.app/u/Willem59)\ **Post date:** [June 14, 2026, 3:23pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/643 "2026-06-14T15:23:03Z")
It seems to have solved itself. I restarted the Ecowitt app and the Homey … and VOILA, they are there. So no help needed anymore. ---
**Author:** ![Clem\_A](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/clem_a/32/81372_2.png) [@Clem\_A](https://community.homey.app/u/Clem_A)\ **Post date:** [July 5, 2026, 8:17am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/644 "2026-07-05T08:17:10Z")
Hi Adrian, I have spent several days troubleshooting this with no success. **Configuration** - Homey Pro (Early 2023) - Homey firmware 13.3.0 - Misol & Ecowitt app 0.2.31 - Ecowitt GW2001 (WittBoy) - Gateway firmware V3.3.2 - Freebox Delta LAN - Static IP addresses **What works** - Ecowitt app receives all weather data correctly. - Homey discovers the gateway every minute. - Homey reads the gateway custom server configuration correctly. - Custom Server: - Protocol = Same as Ecowitt - Homey IP = 192.168.1.28 - Port = 7777 - Path = /données/rapport/ (French localization) - Upload interval = 16 s - Browsing to [http://192.168.1.28:7777/données/rapport/](http://192.168.1.28:7777/donn%C3%A9es/rapport/) returns **“ok”**. **Problem** The gateway is visible in Diagnostics Log but **no Weather Station can ever be paired**. Selecting either **Weather Station** or **Weather Station (WS…)** always ends with: “No new devices found.” Diagnostics repeatedly show: - Gateway discovered - TCP connection established - Gateway settings already match Homey - Connection closed but never any weather report being processed. Could this be a parsing problem or a regression affecting GW2001 on Homey 13.3.0? I can provide the complete Diagnostics Log if needed. merci beaucoup, ps, aidé par ChatGPT… ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [July 5, 2026, 9:47am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/645 "2026-07-05T09:47:43Z")
Yes please open the app settings and select the Detected tab and tap on Send Log. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [July 5, 2026, 1:11pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/646 "2026-07-05T13:11:01Z")
> [@Clem\_A](#): > > - Path = /données/rapport/ (French localization) I think this could be the problem as the app is hard coded to /data/report/ As that is only used by the Homey app it doesn’t need to be localised. ---
**Author:** ![Clem\_A](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/clem_a/32/81372_2.png) [@Clem\_A](https://community.homey.app/u/Clem_A)\ **Post date:** [July 12, 2026, 3:48pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/647 "2026-07-12T15:48:49Z")
\*\*Hi Adrian,\*\*You were absolutely right! The problem was indeed the translated path. After changing **/données/rapport/** back to **/data/report/** , my GW2001 was detected immediately and everything is working perfectly again. Thank you very much for your patience, your support and especially for your talent. It was a very subtle issue (dixit ChatGPT), and without your experience I don’t think I would ever have found it. I hope this will also help other French users if they run into the same problem. Thanks again for your excellent work and for maintaining this great Homey app. **Best regards,** **Clement.** ---
**Author:** ![Marius\_Baran](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marius_baran/32/47854_2.png) [@Marius\_Baran](https://community.homey.app/u/Marius_Baran)\ **Post date:** [July 22, 2026, 6:20pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/648 "2026-07-22T18:20:13Z")
Hi Adrian, I am using your **Misol and Ecowitt app** on my Homey Pro (version 0.2.31). My setup: - Ecowitt HP2564 console - Ecowitt WS90 Wittboy Pro (working perfectly in Homey) - Ecowitt WN36 water temperature sensor (visible in the Ecowitt app and on the HP2564) The WS90 was detected and added successfully, but the WN36 is not available as a device in Homey. Could you please add support for the Ecowitt WN36 water temperature sensor in a future update? I would like to use the water temperature value for Homey flows (for example, monitoring my koi pond temperature and creating notifications). Thank you very much for your great work on this app! Best regards Marius ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [July 22, 2026, 6:49pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/649 "2026-07-22T18:49:03Z")
Can you send the log from the Detected tab on the app settings page. ---
**Author:** ![Marius\_Baran](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marius_baran/32/47854_2.png) [@Marius\_Baran](https://community.homey.app/u/Marius_Baran)\ **Post date:** [July 22, 2026, 7:08pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/650 "2026-07-22T19:08:01Z")
Hallo, Here the Information: 1411f7fc-153c-4328-9262-90118941a8d0 Thank you. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [July 22, 2026, 7:35pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/651 "2026-07-22T19:35:22Z")
Sorry, wrong log. You need to open the app settings page and select the Detected log tab. ---
**Author:** ![Marius\_Baran](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marius_baran/32/47854_2.png) [@Marius\_Baran](https://community.homey.app/u/Marius_Baran)\ **Post date:** [July 22, 2026, 7:57pm UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/652 "2026-07-22T19:57:54Z")
Hello, I have send again. Can you Check or this is correct? Thanks. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [July 23, 2026, 5:01am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/653 "2026-07-23T05:01:49Z")
You should be able to add those using the “Temperature Meter” driver. ---
**Author:** ![Marius\_Baran](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marius_baran/32/47854_2.png) [@Marius\_Baran](https://community.homey.app/u/Marius_Baran)\ **Post date:** [July 23, 2026, 11:28am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/654 "2026-07-23T11:28:54Z")
Its going. Thank you. ---
**Author:** ![Philippe\_GAUMET](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/philippe_gaumet/32/93357_2.png) [@Philippe\_GAUMET](https://community.homey.app/u/Philippe_GAUMET)\ **Post date:** [August 31, 2026, 7:41am UTC](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076/655 "2026-08-31T07:41:12Z")
My homey pro is linked with a GW2000 A weather station, everything is OK Except that the data are sended with UTC timezone. then the daily and weekly counters (rain ) are initialized at 22h00 (in my case in france) I can’t find how to fix that ! [Previous page](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076.md?page=31) [Next page](https://community.homey.app/t/app-pro-misol-and-ecowitt-release-0-2-34-test-0-2-35/47076.md?page=33)