# \[APP\]\[Pro\] MCOHome - Adds support for MCOHome Z-wave devices **URL:** \ **Category:** Apps\ **Tags:** app, z-wave, community-app\ **Created:** [August 22, 2018, 8:31pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159 "2018-08-22T20:31:56Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![tibor](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tibor/32/12939_2.png) [@tibor](https://community.homey.app/u/tibor)\ **Post date:** [July 2, 2019, 3:55pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/41 "2019-07-02T15:55:46Z")
> [@](#): > > > [@Lukas](#): > > > > if there is plan to integrate and add support of MH8 thermostats. > > I’ll check if I can get access to one of the MH8 thermostats. If so, I will add support for it. @TedTolboom: any news? ---
**Author:** ![MiteZZ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mitezz/32/11373_2.png) [@MiteZZ](https://community.homey.app/u/MiteZZ)\ **Post date:** [October 24, 2019, 11:11am UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/42 "2019-10-24T11:11:48Z")
Dear developer, will the 9 in 1 meter ( MCOHome A8-9) be added in the future? It comes with a bundle of handy tools that I want to use. thanks in advance! > **[US $265.0 |MCOHOME 9 in1 Multi sensor A8 9 Z Wave enbaled sensor ingebouwde...](https://nl.aliexpress.com/item/32999239306.html?spm=2114.48010108.06001.21.7e407ea3jUZOxd&gps-id=pcJustForYou&scm=1007.13562.130102.0&scm_id=1007.13562.130102.0&scm-url=1007.13562.130102.0&pvid=c66da383-0916-4965-87a7-8abd9c7ac86e)** > > Smarter Shopping, Better Living! Aliexpress.com ---
**Author:** ![Rockhoppers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rockhoppers/32/3994_2.png) [@Rockhoppers](https://community.homey.app/u/Rockhoppers)\ **Post date:** [April 13, 2020, 4:23pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/43 "2020-04-13T16:23:39Z")
Been playing with Homey again and trying to add some MCO Home 4 load Zwave plus switches. The exclusion and then inclusion process goes well with the units flashing four times to signal comms and registration, but then the install appears to time out and it flashes a message up too fast to read and then says the install failed, almost like it times out. Earler today i added a two button switch, but can;t even do that now. Failed installs pop up as unknown but reachable nodes in the developer page, which i then have to uninstall and try again. Am i missing something @TedTolboom ---
**Author:** ![Rockhoppers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rockhoppers/32/3994_2.png) [@Rockhoppers](https://community.homey.app/u/Rockhoppers)\ **Post date:** [April 15, 2020, 3:44pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/44 "2020-04-15T15:44:02Z")
Update, appears to be happening with some other devices too, so maybe not isolated to the MCO units. Maybe a Homey issue. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 3, 2020, 4:15pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/45 "2020-05-03T16:15:25Z")
Hello @TedTolboom! after today’s updates 1.3.1 and 1.3.2 my MCO Home MH7 thermostats are no longer accessible. Restarting the app could not solve the problem. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/7/87de2ca6cfe5213b9bb76ceb0898b02453e5af55.jpeg) ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [May 3, 2020, 4:49pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/46 "2020-05-03T16:49:02Z")
Hi @DirkG apologies for the inconvenience; with the update to 1.3.x, an error was made in the MH7 driver that should not have been made. Can you indicate what the error message is? Can you restart your Homey? That should solve the non-availability of your thermostats. If not, please send me a diagnostics log from the app. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 3, 2020, 5:40pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/47 "2020-05-03T17:40:55Z")
Hi @TedTolboom, thank you so much for that super quick feedback! No, I can’t specify the error, sorry. The devices were just unreachable. A Homey restart seems to have solved the problem, now I have full access to the devices again. What was the reason to update the app to version 1.3.1? Thanks again for your support! 👍🏼 ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [May 3, 2020, 7:00pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/48 "2020-05-03T19:00:06Z")
> [@DirkG](#): > > A Homey restart seems to have solved the problem, now I have full access to the devices again. > > What was the reason to update the app to version 1.3.1? Thanks for the feedback and once more appologies for the inconvenience caused. Version 1.3 started with two pull requests from @Automate_Asia and @Dijker, but also includes a significant code restructuring to make the app full compatible with the current app store, Homey v4 (Node.JS v12) and make it easier to maintain: Github’s summary: **9,034 changed files** with **614,395 additions** and **3,010 deletions**. Albeit a bit influenced by adding ESLint node\_modules; but all drivers / devices have been touched. Formal (readable) change log: > [@TedTolboom](#): > > v1.3.2 > > - Add additional productTypeID’s for Switch 3 - Plus, thanks @Automate_Asia > - Fix issue with Shutter panel, thanks @Dijker > - Updated app to new app store requirements (incl. icon) > - Update Homey meshdriver to 1.3.22 > - Removed mobile interface (Homey v1.x) and bumped app requirement to 4.x ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 4, 2020, 6:09am UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/49 "2020-05-04T06:09:53Z")
Thanks a lot! ---
**Author:** ![robkoetsier](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robkoetsier/32/16515_2.png) [@robkoetsier](https://community.homey.app/u/robkoetsier)\ **Post date:** [May 4, 2020, 1:21pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/50 "2020-05-04T13:21:19Z")
Hi , thanks for all the great work. But since the last update my MH7 thermostat doesn’t work anymore. It is reachable but when i change the temperature --\> “value” argument must not be a number == is the error that i get, restarted the app first, after that Homey but still the same result ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 4, 2020, 1:50pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/51 "2020-05-04T13:50:46Z")
I can confirm that error. Yesterday I didn’t try to change the temperature. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/a/ca66728fd81354a7905c9e478f7b7932b0b5917e.jpeg) I sent you a diagnostic report: 241a2366-a1c8-4b0b-9040-9f9dd036c30f ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [May 4, 2020, 3:15pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/52 "2020-05-04T15:15:28Z")
> [@robkoetsier](#): > > But since the last update my MH7 thermostat doesn’t work anymore. It is reachable but when i change the temperature → “value” argument must not be a number > [@DirkG](#): > > I can confirm that error. Yesterday I didn’t try to change the temperature. Thanks for reporting. Should be corrected with version 1.3.3, which I just uploaded to the app store: Can you support me to: 1. install version 1.3.3: [MCOHome App for Homey | Homey](https://homey.app/a/com.mcohome/test/) 2. restart your Homey afterwards 3. verify and confirm that the issue has been resolved? Much appreciated! ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 4, 2020, 3:59pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/53 "2020-05-04T15:59:01Z")
Manual setting of temperature and mode is now possible without errors. Many thanks for the fast support! ---
**Author:** ![robkoetsier](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robkoetsier/32/16515_2.png) [@robkoetsier](https://community.homey.app/u/robkoetsier)\ **Post date:** [May 5, 2020, 12:53pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/54 "2020-05-05T12:53:14Z")
Thanks again! I’ll keep you posted as soon as the update came true edit: everything works like a charm again now, many thanks! ---
**Author:** ![Beemandk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/beemandk/32/19304_2.png) [@Beemandk](https://community.homey.app/u/Beemandk)\ **Post date:** [May 10, 2020, 6:02pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/55 "2020-05-10T18:02:42Z")
Hey Ted, sorry to reaching out to you through this tread, but couldn’t find any other way to get in contact with you. You are more then welcome to reply to me through my mail adresse > email address removed, please use PM Im reaching out to you since I found researched and found out that it seems like you are the only one how has ever been able to integrated the Danish company called Logic group in Denmark in homey… The company has come out with a new totally awesome switches called Matrix ZDB5100 with integrated back light and may other nice features. I was wondering if you current app would be compatible with this partical switch and if not, what would it take to have you giving it a shoot of making such an app? Best regards Behrang ---
**Author:** ![Roy\_Hopman](https://avatars.discourse-cdn.com/v4/letter/r/7cd45c/32.png) [@Roy\_Hopman](https://community.homey.app/u/Roy_Hopman)\ **Post date:** [June 11, 2020, 12:48pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/56 "2020-06-11T12:48:08Z")
Hi guys. I have the MCOHome MH7(H) Thermostat mounted in my badroom upstairs connected to homey downstairs. Has worked for couple of months but now it lost connection. \*\* Update \*\* it does update air moisture as well as idle status. it just does not control the temperature. Error message says TRANSMIT\_COMPLETE\_NO ACK. running 1.3.5 ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [June 11, 2020, 2:20pm UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/57 "2020-06-11T14:20:25Z")
Have you ever done “Test” or “Heal” in Developer? Is the thermostat there reachable? ---
**Author:** ![Tangodelta](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tangodelta/32/9471_2.png) [@Tangodelta](https://community.homey.app/u/Tangodelta)\ **Post date:** [June 18, 2020, 8:05am UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/58 "2020-06-18T08:05:20Z")
Any idea how to change from F to C on PM 2.5 display? Shows C in app. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/9/89e6d860717855bbb38b4a1b592df54ad02bf7f0.jpeg) ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [June 18, 2020, 8:50am UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/59 "2020-06-18T08:50:14Z")
It is described in the manual. ---
**Author:** ![Tangodelta](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tangodelta/32/9471_2.png) [@Tangodelta](https://community.homey.app/u/Tangodelta)\ **Post date:** [June 18, 2020, 8:58am UTC](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159/60 "2020-06-18T08:58:30Z")
Well, I can assure you it was the first place I looked, and I would not bother to write a topic. But, still, even after your comment my question is the same, thanks for your expertise! Maybe we have different manuals, in mine and in the online version I do not find a solution to this! [Previous page](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159.md?page=2) [Next page](https://community.homey.app/t/app-pro-mcohome-adds-support-for-mcohome-z-wave-devices/159.md?page=4)