# \[APP\]\[Pro\]Linked Switches **URL:** \ **Category:** Apps\ **Created:** [August 18, 2026, 12:51am UTC](https://community.homey.app/t/app-pro-linked-switches/158431 "2026-08-18T00:51:09Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![Gabriel\_Pedrosa\_Mach](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gabriel_pedrosa_mach/32/176567_2.png) [@Gabriel\_Pedrosa\_Mach](https://community.homey.app/u/Gabriel_Pedrosa_Mach)\ **Post date:** [August 18, 2026, 12:51am UTC](https://community.homey.app/t/app-pro-linked-switches/158431/1 "2026-08-18T00:51:09Z")
**Linked Switches** Keep switches in sync — no flows needed This app lets you group 2 to 10 ON/OFF devices so they always stay in the same state, no matter which one triggers the change. Perfect for three-way switch setups where multiple physical switches control the same light or group of lights. **How it works:** the app creates a virtual device that links your switches together. This virtual device appears in your device list and acts as the group controller — you don’t need to interact with it directly, but it must stay paired for the sync to work. **Two drivers** - **Linked Switch Group** — a closed sync group where all devices mirror each other. One device must be marked as Primary — it is controlled first, with the others following with a small delay to reduce simultaneous commands on your Zigbee network. Typically this is the switch wired directly to the load. - **Switch Master** — one master switch controls 2 to 9 subdevices. The master can override the slaves, but each slave keeps individual control. When all slaves reach the same state, the master syncs back automatically. **No flows required** — synchronization is handled automatically by the app as soon as any device in the group is toggled, physically or via Homey. **Install:** [Homey App Store](https://homey.app/a/gpm.linked.switches) **Source:** [GitHub](https://github.com/gpmachado/gpm.linked.switches)