# \[APP\] \[Pro\] Honeywell EvoHome

**URL:** <https://community.homey.app/t/app-pro-honeywell-evohome/71817>\
**Category:** Apps\
**Tags:** app, homey-pro, homey-bridge\
**Created:** [November 7, 2022, 9:12am UTC](https://community.homey.app/t/app-pro-honeywell-evohome/71817 "2022-11-07T09:12:11Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Mickel\_Luiten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mickel_luiten/32/12404_2.png) [@Mickel\_Luiten](https://community.homey.app/u/Mickel_Luiten)\
**Post date:** [November 7, 2022, 7:35pm UTC](https://community.homey.app/t/app-pro-honeywell-evohome/71817/3 "2022-11-07T19:35:28Z")

</div>

Version 4.3.1 has some improvements :

- multi locations on thermostat devices.
- multi location for quik actions.
- polling from 3 minutes to 60sec.
- SDK3

For multilocations you can ether do 2 things.

1. log in to [Home | Total Connect Comfort International](https://international.mytotalconnectcomfort.com/Account/Login?ReturnUrl=%2fAccount) with you evohome credentials and add the location, pair your evohome controller with the mac en crc.
2. Share a evohome account with your own evonhome account.

After that add the devices in homey, for the quickactions pair with the new added driver/device(quickaction)

* * *

Because of the wrong implementation of the auth authentication in version 3.1.3 polling time was set to 3 minutes, this is in version 4.0.0 fixed and now polling time for thermostats and quikactions is set back to 10 seconds.

* * *

Upgrade to Homey SDK3

* * *

* * *

**BE AWARE if you upgrading from version 3.1.3. to version 4.x.x**  
\*\* upgrade from version 3.1.2 or lower wil fail, so first upgrade to 3.1.3 then upgrade to 4.0.0 \*\*

- The current thermostat devices will be preserved!
- Some flows will be _ **broken and are removed** _ or moved to the device.
- Some useless tokens are removed

Trigger / token : _Any changing temperature_ is **removed**. Homey’s device driven architecture makes this flow useless,  
Use the device flow trigger and tokens.

Trigger . token : _Mode changed not via Homey_ is **removed**. Becasue of the multilocation implementation, there now way on this card ti tell from which location the quickaction is triggered.  
Use the device flow trigger and tokens.

Actioncard : _Set QuickAction_ is moved to the quikaction device card.

Actioncard : _Set Temporary QuickAction_ is **removed**. This actioncard was on timebased(hour) but in evhomepanel most quickactions is only daily basis (expect the eco/boost mode)

Actioncard : _Set QuickAction manual entry_ is **removed**.  
Becasue of the multilocation implementation, there now way on this card ti tell from which location the quickaction is triggered.  
Use the device flow triggers and tokens.

Actioncard : _Cancel adjustments in all zones_ is **removed**. . Becasue of the multilocation implementation, on all locations the temperature cancel will fire.  
User the cancel temperatur adjustment card on the device.

General setting for username and password is **removed**. Just enter your credentials during pairing,. Or use the repair on one of the device if you e.g. change your evohome credentials

---

_[View the full topic](https://community.homey.app/t/app-pro-honeywell-evohome/71817)._