# \[APP\]\[Pro\] Homewizard 🧙‍♂️ **URL:** \ **Category:** Apps\ **Tags:** app, official, homey-pro\ **Created:** [October 14, 2019, 2:25pm UTC](https://community.homey.app/t/app-pro-homewizard/19267 "2019-10-14T14:25:58Z")\ **Posts on this page:** 20\ **Page:** 38
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 9, 2023, 2:47pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/749 "2023-01-09T14:47:22Z")
Hit diagnostic again. Btw you are 100% sure that meter was negative before? You’re were not mistaken by the W value on the lower end right? Maybe check the insights webpage and show me the graph where it was negative on that value. [https://insights.homey.app/](https://insights.homey.app/) Then select your P1 meter and share the graph of your “Totaal verbruik KWH” ---
**Author:** ![J333beee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/j333beee/32/67816_2.png) [@J333beee](https://community.homey.app/u/J333beee)\ **Post date:** [January 9, 2023, 3:49pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/750 "2023-01-09T15:49:51Z")
Yes 100% it was negative. After summer I had even more than -1000 kWh because of the PV system. I’m looking for screendumps from that time, but not sure if I made those. I deleted the meter and added it again, so it looks like my graphs are not there anymore… Found one! ![screen5](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/5/15670114e490429a98b3bb519d709316d996223c.jpeg) ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 9, 2023, 4:07pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/751 "2023-01-09T16:07:04Z")
Ok so there is the -742,55 kwh Totaal Verbruik kwh I wanted to see to be sure it does go negative. All the other T1 and T2 will be positive. Still no error in the diagnostic. Let me see if I can get a test version which should handle the new output better related to the new firmware as I am lost now why it doesnt update. ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 10, 2023, 10:14am UTC](https://community.homey.app/t/app-pro-homewizard/19267/752 "2023-01-10T10:14:31Z")
Beta / Test version 3.1.0 - New P1 features firmware (Peak/Normal & Dag Nacht tarief) - Bugfix for Total Usage KWH / Totaal verbruik KWH - Tariff changed trigger card added (untested) > **[HomeWizard](https://homey.app/nl-nl/app/com.homewizard/HomeWizard/test/)** > > Helps you understand and save ---
**Author:** ![J33bee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/j33bee/32/67778_2.png) [@J33bee](https://community.homey.app/u/J33bee)\ **Post date:** [January 10, 2023, 10:18am UTC](https://community.homey.app/t/app-pro-homewizard/19267/753 "2023-01-10T10:18:48Z")
Bingo! ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/9/695f3af013b69888dc0bcf6893d964f305cd0f08.jpeg) ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 10, 2023, 1:18pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/754 "2023-01-10T13:18:44Z")
So in short an unfortunate side affect of code I implemented for Sweden Energy P1 dongles kicked in for Netherlands as well. Which didnt subtract the T2 from imported energy (sweden has no T2). This has been fixed now. ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [January 10, 2023, 5:13pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/755 "2023-01-10T17:13:55Z")
Does anyone know where to find what the latest firmware version for the P1 is,.preferably incl a changelog? ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 10, 2023, 5:49pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/756 "2023-01-10T17:49:20Z")
No exact versioning but this is currently the reference documentation I know about: [https://homewizard-energy-api.readthedocs.io/getting-started.html](https://homewizard-energy-api.readthedocs.io/getting-started.html) ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 12, 2023, 7:49am UTC](https://community.homey.app/t/app-pro-homewizard/19267/757 "2023-01-12T07:49:45Z")
Beta/test v3.1.1 - Trigger fix for Peak/OffPeak Energy ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [January 15, 2023, 10:57pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/758 "2023-01-15T22:57:58Z")
Don’t know if you follow other topics, @Jeroen_Tebbens; I think it should have been mentioned here… There’s another thread about the HomeWizard app not displaying current values: > [@Homewizard p1 geen gasstanden meer sinds 2 dagen](https://community.homey.app/t/homewizard-p1-geen-gasstanden-meer-sinds-2-dagen/75136): > > Sinds 13 Januari 0:00 uur geen uitlezing van gas meer. Via de Homewizard app op de telefoon nog steeds wel. Is er iets veranderd in de App? ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 16, 2023, 6:18am UTC](https://community.homey.app/t/app-pro-homewizard/19267/759 "2023-01-16T06:18:44Z")
I dont follow all topics if I am not the started (not getting notifications if my name is not listed). ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 16, 2023, 10:35am UTC](https://community.homey.app/t/app-pro-homewizard/19267/760 "2023-01-16T10:35:47Z")
@Pieter_Pessers thx for your paypal donation 😃 ---
**Author:** ![Pieter\_Pessers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pieter_pessers/32/8848_2.png) [@Pieter\_Pessers](https://community.homey.app/u/Pieter_Pessers)\ **Post date:** [January 16, 2023, 10:52am UTC](https://community.homey.app/t/app-pro-homewizard/19267/761 "2023-01-16T10:52:12Z")
Your welcome. ---
**Author:** ![Gerrit\_Ekelmans](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerrit_ekelmans/32/8452_2.png) [@Gerrit\_Ekelmans](https://community.homey.app/u/Gerrit_Ekelmans)\ **Post date:** [January 16, 2023, 9:39pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/762 "2023-01-16T21:39:29Z")
Hello Henk I update tonight from version 3.02 to version 4.14 I deleted the p1 from the app, pressed 15 seconds till the light is white, and install a new p1 , press till the light gets blue and connect the wifi. Then it update itself. ---
**Author:** ![Arjanvde](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arjanvde/32/68508_2.png) [@Arjanvde](https://community.homey.app/u/Arjanvde)\ **Post date:** [January 18, 2023, 8:44am UTC](https://community.homey.app/t/app-pro-homewizard/19267/763 "2023-01-18T08:44:35Z")
Hi @Jeroen_Tebbens, Could you add active\_voltage\_l1\_v, active\_voltage\_l2\_v and active\_voltage\_l3\_v? This would be helpful to debug why my solar system might (partially) shuts down this summer and to so if any voltage dips are existing during the day. Many thanks. ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 18, 2023, 11:35am UTC](https://community.homey.app/t/app-pro-homewizard/19267/764 "2023-01-18T11:35:34Z")
Do you have it in your API output then? I got a Phase 1 myself but there is no voltage info atm. ---
**Author:** ![Arjanvde](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arjanvde/32/68508_2.png) [@Arjanvde](https://community.homey.app/u/Arjanvde)\ **Post date:** [January 18, 2023, 12:03pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/765 "2023-01-18T12:03:55Z")
Hi Jeroen, in the app I see currently the fase 1 Amperage, hence the question. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/5/65a49ff3b551f3c99017751ec429b5c3b1914520.jpeg) Below the API data as well: wifi\_ssid:“Unifi” wifi\_strength:100 smr\_version:50 meter\_model:“ISKRA 2M550T-1013” unique\_id": "00112233445566778899AABBCCDDEEFF active\_tariff:2 total\_power\_import\_kwh:1376.108 total\_power\_import\_t1\_kwh:801.591 total\_power\_import\_t2\_kwh:574.517 total\_power\_export\_kwh:454.253 total\_power\_export\_t1\_kwh:128.604 total\_power\_export\_t2\_kwh:325.649 active\_power\_w:-493 active\_power\_l1\_w:-243 active\_power\_l2\_w:-88 active\_power\_l3\_w:-161 active\_voltage\_l1\_v:228.3 active\_voltage\_l2\_v:230.6 active\_voltage\_l3\_v:228.8 active\_current\_l1\_a:-1.064 active\_current\_l2\_a:-0.382 active\_current\_l3\_a:-0.704 voltage\_sag\_l1\_count:5 voltage\_sag\_l2\_count:4 voltage\_sag\_l3\_count:4 voltage\_swell\_l1\_count:3 voltage\_swell\_l2\_count:2 voltage\_swell\_l3\_count:3 any\_power\_fail\_count:6 long\_power\_fail\_count:3 total\_gas\_m3:2432.778 gas\_timestamp:230118130505 gas\_unique\_id:“XYB” external:[{“unique\_id”:“XYYYYN” type:“gas\_meter” timestamp:230118130505 value:2432.778 unit:“m3”}]} ---
**Author:** ![Jeroen\_Tebbens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_tebbens/32/62246_2.png) [@Jeroen\_Tebbens](https://community.homey.app/u/Jeroen_Tebbens)\ **Post date:** [January 18, 2023, 12:43pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/766 "2023-01-18T12:43:06Z")
Funny how Phase1 doesn’t have voltage at all. Not sure when I can find time to implement but I’ll put in the enhencement list. | | | | --- | --- | | wifi\_ssid | stardust-iot | | wifi\_strength | 100 | | smr\_version | 42 | | meter\_model | Kaifa AIFA-METER | | unique\_id | 4530303039313030303133303237353134 | | active\_tariff | 2 | | total\_power\_import\_kwh | 23168.67 | | total\_power\_import\_t1\_kwh | 12506.378 | | total\_power\_import\_t2\_kwh | 10662.292 | | total\_power\_export\_kwh | 18561.023 | | total\_power\_export\_t1\_kwh | 5891.187 | | total\_power\_export\_t2\_kwh | 12669.836 | | active\_power\_w | -1336 | | active\_power\_l1\_w | -1336 | | active\_current\_l1\_a | 6 | | voltage\_sag\_l1\_count | 1 | | voltage\_swell\_l1\_count | 0 | | any\_power\_fail\_count | 14 | | long\_power\_fail\_count | 10 | | total\_gas\_m3 | 5109.576 | | gas\_timestamp | 230118130000 | | gas\_unique\_id | 4730303332353631323237383833393135 | | external | | | 0 | | | unique\_id | 4730303332353631323237383833393135 | | type | gas\_meter | | timestamp | 230118130000 | | value | 5109.576 | | unit | m3 | ---
**Author:** ![Zowieke](https://avatars.discourse-cdn.com/v4/letter/z/f17d59/32.png) [@Zowieke](https://community.homey.app/u/Zowieke)\ **Post date:** [January 18, 2023, 4:56pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/767 "2023-01-18T16:56:48Z")
Hi, Since version 3.1.1 of the app it seems the “T1 and T2 teruglevering” are not read anymore from the P1 meter. “T1 and T2 gebruik” as well as “gasmeter” are read correctly. Also the new data, like “tarief actief”, “huidig amp fase 1”, etc are all empty. Not sure what these are for if not read from the meter. P1 meter connected to WiFi with static ip. All data available in Homewizard app without issues. API is enabled. Firmware 3.02 (not recently updated). Only in Homey not all data available. What is wrong with the current version? And how can i rollback to the previous? Kind regards, Zowieke ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [January 18, 2023, 5:35pm UTC](https://community.homey.app/t/app-pro-homewizard/19267/768 "2023-01-18T17:35:56Z")
These new values become active with the new P1 firmware v4.x, which currently rolled out by Homewizard. [Previous page](https://community.homey.app/t/app-pro-homewizard/19267.md?page=37) [Next page](https://community.homey.app/t/app-pro-homewizard/19267.md?page=39)