# \[APP\]\[Pro\] HomeKit Controller - for a better Homey

**URL:** <https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520>\
**Category:** Apps\
**Tags:** app, homey-pro\
**Created:** [November 13, 2023, 2:48pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520 "2023-11-13T14:48:49Z")\
**Posts on this page:** 1\
**Showing post:** 372

<div class="post-metadata">

**Author:** ![Planeet](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/planeet/32/79647_2.png) [@Planeet](https://community.homey.app/u/Planeet)\
**Post date:** [December 15, 2024, 4:03pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/372 "2024-12-15T16:03:12Z")

</div>

I’ve been at it on and off for 2 weeks now, and today I was able to install the Aqara FP2 presence sensor in Homey Pro 2023. This is what worked for me (mainly got it to work from this topic: [Can you connect aqara presence sensor FP2 to homey? - #22 by Greg\_Warren](https://community.homey.app/t/can-you-connect-aqara-presence-sensor-fp2-to-homey/94017/22)). I found that if i tried to pair the device and it was unsuccessfull, it won’t allow a succesfull pairing later from that point on, hence below process:

- remove the sensor from aqara app
- restart the homekit app in hp23
- Greg mentioned he had to turn off mobile internet.
- reinstall the presence sensor to aqara app.
- sensor shows up for pairing through the homekit app.
- enter the correct pin on the back of the device. I mistook a 0 for an 8 😂
- it should now pair with hp23.

Now, first pairing did fail for me, not because of the wrong pin. 2nd try was successfull.

---

_[View the full topic](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520)._