# \[APP\]\[Pro\] HomeKit Controller - for a better Homey **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [November 13, 2023, 2:48pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520 "2023-11-13T14:48:49Z")\ **Posts on this page:** 20\ **Page:** 8
**Author:** ![The\_cure\_Bob](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/the_cure_bob/32/80551_2.png) [@The\_cure\_Bob](https://community.homey.app/u/The_cure_Bob)\ **Post date:** [February 21, 2024, 8:44pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/148 "2024-02-21T20:44:58Z")
Bonjour Nicolas, Oui j’ai réussi a l’intégrer ( même 2). J’ai pris la version test, ensuite j’ai intégré le fp2 sur homey, qui ne voulait pas. J’ai donc supprimé le fp2 dans l’App aqara et je l’ai de nouveau remis sur l’App, et j’ai pu ensuite l’intégrer dans homekit. C’est laborieux quand même Yann ---
**Author:** ![Nicolas\_Coquet](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nicolas_coquet/32/78589_2.png) [@Nicolas\_Coquet](https://community.homey.app/u/Nicolas_Coquet)\ **Post date:** [February 21, 2024, 8:51pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/149 "2024-02-21T20:51:27Z")
Bonsoir, Merci pour la reponse rapide ! J’avais compris que je devais le supprimer uniquement de Home assistant mais pas de l’app Aqara ! Je vais essayer 🙂 ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [February 21, 2024, 10:01pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/150 "2024-02-21T22:01:02Z")
@The_cure_Bob @Nicolas_Coquet If you could please keep the conversation in English as much as possible, then more people will be able to participate and help you. If you would rather not or can’t communicate in English then please check out Non-English boards/categories: [Français (French)](https://community.homey.app/c/franc3a7ais) ---
**Author:** ![Simon\_Horowitz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/simon_horowitz/32/79427_2.png) [@Simon\_Horowitz](https://community.homey.app/u/Simon_Horowitz)\ **Post date:** [February 23, 2024, 6:28pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/151 "2024-02-23T18:28:06Z")
I have an iDevices wall switch, which I’ve removed from the Home App but I’m getting this error (photo attached). Please advise ![photo_2024-02-23_13-26-56](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/a/facc263653c586d34ebcae54cacc3bfcb962e5a7.jpeg) ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [February 23, 2024, 6:50pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/152 "2024-02-23T18:50:16Z")
Can you start a new fresh browser session with homay and try pair again your device (or did you already refried). Please enter ok once after pin and wait… If fails again please pm me the log. Goto app settings and copy ---
**Author:** ![Simon\_Horowitz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/simon_horowitz/32/79427_2.png) [@Simon\_Horowitz](https://community.homey.app/u/Simon_Horowitz)\ **Post date:** [February 23, 2024, 7:03pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/153 "2024-02-23T19:03:28Z")
Hi Martin, I am brand new to this community, I don’t see how to PM. I did do what you suggested I try, and still got the same results, where should i send you the log? ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [February 23, 2024, 7:15pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/154 "2024-02-23T19:15:52Z")
Click on my name and message ---
**Author:** ![Simon\_Horowitz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/simon_horowitz/32/79427_2.png) [@Simon\_Horowitz](https://community.homey.app/u/Simon_Horowitz)\ **Post date:** [February 23, 2024, 7:29pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/155 "2024-02-23T19:29:32Z")
I’m suspecting that I still need permission to PM other members, because I don’t have such an option. Sorry for the extra trouble, if you can email me i’d reply with the log, or if there is no private network info in the log, I can post it here as well. ---
**Author:** ![Dennis\_van\_Dinter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dennis_van_dinter/32/28180_2.png) [@Dennis\_van\_Dinter](https://community.homey.app/u/Dennis_van_Dinter)\ **Post date:** [February 24, 2024, 9:07am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/156 "2024-02-24T09:07:32Z")
Hi all, I never worked with Homekit and I don’t know anything about. That brings me to the question. Can I install an Aqara FP2 with this app without actually owning a Homekit? Or is a Homekit not a separate device, but more a way of integration in the Apple system? EDIT: apparently no need for a Homekit controller. ---
**Author:** ![Gar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gar/32/34193_2.png) [@Gar](https://community.homey.app/u/Gar)\ **Post date:** [February 29, 2024, 4:31pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/157 "2024-02-29T16:31:26Z")
Hello, Perhaps strange question… but were to find the pincode. (first time installing FP2) ---
**Author:** ![The\_cure\_Bob](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/the_cure_bob/32/80551_2.png) [@The\_cure\_Bob](https://community.homey.app/u/The_cure_Bob)\ **Post date:** [February 29, 2024, 4:45pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/158 "2024-02-29T16:45:26Z")
Hello, Simple on your device😀 ---
**Author:** ![Simon777](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/simon777/32/78190_2.png) [@Simon777](https://community.homey.app/u/Simon777)\ **Post date:** [March 11, 2024, 6:01pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/159 "2024-03-11T18:01:56Z")
Hello Martin The last couple of updates fixed the problem with my Velux blinds/windows. The percentage is now correct. If I may come with a small request. I would like to be able to press the blinds/window button and it then toggles the blinds on/off or 0/100% Thank you ---
**Author:** ![Troy\_Helphrey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/troy_helphrey/32/78979_2.png) [@Troy\_Helphrey](https://community.homey.app/u/Troy_Helphrey)\ **Post date:** [March 12, 2024, 6:35pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/160 "2024-03-12T18:35:23Z")
Hi Martin, I figured out I can add a Roku streamer (4800X) to Homey using your **Homekit Controller** app. After I add it, I can see commands (Rewind, FastForward, Next, Previous, Up, Down, Left, Right, Select, Back, Exit, Pause and Info) and if I scroll to select one of these, it does that function on the Roku, which is great. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/4/74198a7696aff98a7b02401fd8b4e298b4d3971a.jpeg) When I try to create a flow, I get these: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/7/972da7b24f18e7fe04d51b29b429569a26995a4a.png) WHEN - Capabilities (Device State, State media) which are on/off and play, paused, etc. AND - Capabilities, Capability options or Capability number.I have a question I hope you can help with THEN - Device Properties, Properties options, Property numbers. I played around with the THEN card and don’t have the correct **Properties options** or **Property numbers** I’m hoping you have more developer knowledge to give me a mapping of the Capabilities, options, numbers and the Device Properties, options and numbers that will allow me to “control” the Roku Thanks in advance. Troy ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [March 12, 2024, 7:15pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/161 "2024-03-12T19:15:29Z")
> [@Troy\_Helphrey](#): > > THEN - Device Properties, Properties options, Property numbers. > > I played around with the THEN card and don’t have the correct **Properties options** or **Property numbers** > > I’m hoping you have more developer knowledge to give me a mapping of the Capabilities, options, numbers and the Device Properties, options and numbers that will allow me to “control” the Roku Can you click the Device Properties in the THEN card and post screenshot? If there is an option **Remote key** select that and click Properties options, post a screen shot as well, Property Number can be used for capabilities that have no options but use a number, like dim or so. ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [March 12, 2024, 7:22pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/162 "2024-03-12T19:22:00Z")
If still issue, can you install test version 1.2.4 > **[HomeKit Controller](https://homey.app/en-us/app/com.verbem.Hhomekiy/HomeKit-Controller/)** > > Homekit Controller for a better Homey then goto device settings and scroll to below field and select all/copy the contents of JSON and PM it to me, this way i can create a virtual device like yours and check its behaviour/definitions. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/4/b412df0bdb60c59379d4c0ba84cd495ceb09c6d2.png) ---
**Author:** ![Troy\_Helphrey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/troy_helphrey/32/78979_2.png) [@Troy\_Helphrey](https://community.homey.app/u/Troy_Helphrey)\ **Post date:** [March 12, 2024, 8:48pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/163 "2024-03-12T20:48:42Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/7/87a8d1b60bd048e22d5ab2e1cf54fc2ed735fb75.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/f/6fa28e4f48497f9d938955217951e18079cfe05c.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/7/a7626fa9cbec521c8f0391d8e582e3861546fe30.png) I played around with this and selected **Remote key** for **Device Properties** and **Down** for the **Property options** and then tried 0, 1, 2, 3 for the **Property number** , but it always reported: **Value X is not valid** X=value I tried. I also tried selecting **Down** for the **Property options** and **null** for **Property number** since the card says **Properties option** **or** value **Property number** and got error: **Value 5 is not valid** If I can figure out what the valid Property numbers are, I might be able to get it to work. Back in Oct, I submitted a request to Roku to develop a Homey App for Roku, but they seemed to think I was requesting an app on their platform which they call channel even though I tried to explain it and said they could work with the Homey developers. ---
**Author:** ![Dd3](https://avatars.discourse-cdn.com/v4/letter/d/9de053/32.png) [@Dd3](https://community.homey.app/u/Dd3)\ **Post date:** [March 13, 2024, 5:01pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/164 "2024-03-13T17:01:02Z")
I had what I thought was a great idea to use this controller to connect Hubitat to homey Hubitat can publish its devices to HomeKit so using this app I connected a few simple devices that Hubitat happily controls (a motion sensor and and a couple of power switches that have lights attached to them in remote places hence wanting to keep Hubitat as the aggregator of connections) but whilst the devices are added to homey they are not identified correctly and do not work. I have an fp2 presence sensor and that works fine so the controller app is Running ok. In the attached picture the hallway and the two lights are devices connected to the Hubitat ![IMG_0648](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/d/8d1bedcc356c10d680da9b73d2fbec1640f885a2.jpeg) ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [March 13, 2024, 5:22pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/165 "2024-03-13T17:22:29Z")
Install the latest test version. Then go to the habitat device settings. Scroll to the field JSON and select all and PM me the contents of that field. So i can reproduce whats going on in my environment. ---
**Author:** ![mariner82](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mariner82/32/8117_2.png) [@mariner82](https://community.homey.app/u/mariner82)\ **Post date:** [March 29, 2024, 1:07pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/166 "2024-03-29T13:07:08Z")
Hi Martin, Loving this app, I have it working on the FP2 no problems at all. I’ve also added my LightWaveRF gateway, however when I try to use any of the devices that have been added from the gateway I get an error, I also don’t seem to be able to add all the devices in the LightWaveRF app. I suspect that as the devices have either two sockets or multiple switches it only shows part of the device, so one of the two sockets, or one of the 3 or 4 switches. I’ve attached a screenshot of the error I get, I’ve looked in the logs and don’t see anything happening I also don’t see where I can specify the Listener Happy to supply any information or try any suggestions ![IMG_5451](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/a/faf23aece35ec8efc0867766f3ec68d86b2aa73a.jpeg) Edit: each of the LightWaveRF devices have the ability to recognise multiple presses and within the LightWaveRF app perform tasks, under the advanced section for each device I see 30 labels however putting a name to a label does nothing to resolve the above screenshot error. ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [March 29, 2024, 5:43pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/167 "2024-03-29T17:43:58Z")
If you do not already, can you check with latest test version? [Previous page](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520.md?page=7) [Next page](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520.md?page=9)