# \[APP\]\[Pro\] HomeKit Controller - for a better Homey **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [November 13, 2023, 2:48pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520 "2023-11-13T14:48:49Z")\ **Posts on this page:** 20\ **Page:** 17
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [October 25, 2024, 11:55am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/332 "2024-10-25T11:55:47Z")
Can you pm me the log. NOT the diagnostic report. But go to app settings and copy log from there ---
**Author:** ![FamilyG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/familyg/32/117740_2.png) [@FamilyG](https://community.homey.app/u/FamilyG)\ **Post date:** [October 30, 2024, 10:30am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/333 "2024-10-30T10:30:32Z")
Ikea Dirigera thru HomeKit missing motion/door sensors? Got a Homey and had an idea of using it as a cool automation umbrella over my Ikea Dirigera gateway. Started in the general forum and was asked to ask the question here… Run v1.3.15 wish rocks! and enabled me to use the setup below: Environment: Homey 2016 → Ikea Dirigera → Zigbee things All Ikea Tradfri lamps + control outlets + light drivers and Sonoff humidity/temp sensors appeared and works as expected! Amazed how easy it was 😃 //Challenge Missing all my Vallhorn + Tradfri motion and Parasoll door/window sensors? Odd is that I still can see/add the “Battery” of these devices, and the tiles show the correct manufacturer, type, name… //Question Is there a setting I have missed that’s needed to see the full features of the missing sensors where I now only see the battery information? This is my second post in total in this forum so let’s see if I mess up 😉 ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [October 30, 2024, 4:24pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/334 "2024-10-30T16:24:06Z")
Should be fixed in next update. Next update are \>= 12.2 Homey fw dependent. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/9/e94af75f083c89bb58d4c6cc0cd0755d303e4f15.png) ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [October 30, 2024, 4:25pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/335 "2024-10-30T16:25:32Z")
> [@FamilyG](#): > > //Question > > Is there a setting I have missed that’s needed to see the full features of the missing sensors where I now only see the battery information? No, it should be self-defining ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [October 30, 2024, 4:33pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/336 "2024-10-30T16:33:59Z")
I think onvis SMS2 is a Thread device. That is not supported by my app. ---
**Author:** ![Caesar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caesar/32/88727_2.png) [@Caesar](https://community.homey.app/u/Caesar)\ **Post date:** [October 30, 2024, 4:52pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/337 "2024-10-30T16:52:38Z")
Yes it is! That explains it. Thank you. ---
**Author:** ![Kristof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kristof/32/79673_2.png) [@Kristof](https://community.homey.app/u/Kristof)\ **Post date:** [November 8, 2024, 6:49am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/338 "2024-11-08T06:49:02Z")
Aqara Fp2 cards for motion have disappeared. Only light cards remain. ![1000018965](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/8/a88aa359fbcd7f812aca6e91429e88b4c699dce4.jpeg) What happened? ---
**Author:** ![dambakk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dambakk/32/115208_2.png) [@dambakk](https://community.homey.app/u/dambakk)\ **Post date:** [November 8, 2024, 8:55am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/339 "2024-11-08T08:55:11Z")
Same for me, no motion alarms, and my flows have “Card unavailable” cards. I’m on Homey version 12.2.0 and HC version 1.3.15. I can see in the app log that it still receives the alarm\_motion event. I also see the HC update which removes the “alarm\_motion as custom capability”, should I upgrade to that? ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 8, 2024, 10:05am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/340 "2024-11-08T10:05:13Z")
12.2.0 has a change on how they deal with system capabilities vs custom capabilities with the same id. Let me look into it ---
**Author:** ![roberto2391](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto2391/32/68551_2.png) [@roberto2391](https://community.homey.app/u/roberto2391)\ **Post date:** [November 8, 2024, 10:09am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/341 "2024-11-08T10:09:17Z")
Also same behaviour to my aqara fp2 added to homey pro using homet kit app, right now presence card is left what happen? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/e/8e8a7eb2956bff041455651cc206aa1ee39864ca.png) Seems like it is happening after new homey pro update to v12.2.0…please help! ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 8, 2024, 10:23am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/342 "2024-11-08T10:23:10Z")
Check the latest test version ---
**Author:** ![roberto2391](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto2391/32/68551_2.png) [@roberto2391](https://community.homey.app/u/roberto2391)\ **Post date:** [November 8, 2024, 10:35am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/343 "2024-11-08T10:35:46Z")
do you mean aqara homey app test version or homekit homey app test version? ---
**Author:** ![dambakk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dambakk/32/115208_2.png) [@dambakk](https://community.homey.app/u/dambakk)\ **Post date:** [November 8, 2024, 10:40am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/344 "2024-11-08T10:40:35Z")
Upgrading to 1.3.17 (test) brought back the motion detection, and even replaced the “Card unavailable” cards in the flows with their respective cards! Thanks! 🙏 ---
**Author:** ![roberto2391](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roberto2391/32/68551_2.png) [@roberto2391](https://community.homey.app/u/roberto2391)\ **Post date:** [November 8, 2024, 10:47am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/345 "2024-11-08T10:47:12Z")
Yes with test version of homekit is fixed thanks ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/d/5db31ca17022c29a7ae830db39ddb0c239df53b7.png) ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 8, 2024, 11:44am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/346 "2024-11-08T11:44:27Z")
It is waiting for Athom to go live. ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 8, 2024, 4:15pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/347 "2024-11-08T16:15:15Z")
Update 12.2.0 happened, install test version of Homekit Controller app. ---
**Author:** ![Kristof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kristof/32/79673_2.png) [@Kristof](https://community.homey.app/u/Kristof)\ **Post date:** [November 8, 2024, 5:39pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/348 "2024-11-08T17:39:04Z")
How can we install test version? ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 8, 2024, 5:40pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/349 "2024-11-08T17:40:19Z")
> **[HomeKit Controller](https://homey.app/en-us/app/com.verbem.Hhomekiy/HomeKit-Controller/)** > > Homekit Controller for a better Homey ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 8, 2024, 6:02pm UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/350 "2024-11-08T18:02:29Z")
the app is approved for 12.2.0 but cannot push it to live as the pro 19 is not yet at 12.2.0. So if you have the issue and are at 12.2.0, use the test version ---
**Author:** ![Kim\_Kaersgaard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kim_kaersgaard/32/114324_2.png) [@Kim\_Kaersgaard](https://community.homey.app/u/Kim_Kaersgaard)\ **Post date:** [November 11, 2024, 8:25am UTC](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520/351 "2024-11-11T08:25:12Z")
Hi It worked when upgrading to the test-version 1.3.17. Thanks. But after that, when adding new devices to Homekit, I need to restart the app, in order to make the FP2 to bind to Homey Pro after tapping in the device Number in the process [Previous page](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520.md?page=16) [Next page](https://community.homey.app/t/app-pro-homekit-controller-for-a-better-homey/94520.md?page=18)