# \[APP\]\[Pro\] Home Assistant - Community App

**URL:** <https://community.homey.app/t/app-pro-home-assistant-community-app/71477>\
**Category:** Apps\
**Tags:** app, tools, homey-pro, home-assistant\
**Created:** [October 31, 2022, 8:25pm UTC](https://community.homey.app/t/app-pro-home-assistant-community-app/71477 "2022-10-31T20:25:26Z")\
**Posts on this page:** 1\
**Showing post:** 278

<div class="post-metadata">

**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\
**Post date:** [March 5, 2023, 11:46am UTC](https://community.homey.app/t/app-pro-home-assistant-community-app/71477/278 "2023-03-05T11:46:52Z")

</div>

New **test version 1.2.0** :

> **[Home Assistant Community](https://homey.app/en-us/app/io.home-assistant.community/Home-Assistant-Community/)**
>
> Connect to Home Assistant

1. **Adding HA device entities to a Homey device:**  
The new version offers a possibility to integrate all sensors/buttons/switches from a HA device into the Homey device.  
The Homey device is still domain based. So you will still add a device based on its main entity (e.g. vacuum, light, switch or sensor) because the device properties and actions are based on these domains and their attributes/services used in HA.  
But once you have added an entity to Homey (let’s say a Hue motion sensor), you can add all other entities, to. So you will have a motion sensor that shows the temperature, lux, too.

Example of a Hue motion sensor:

- The sensor device:  

- Now go to device settings and activate the first checkbox:  

- Other sensor entities from the HA device, the motion sensor belongs to, are added:  

- In addition, you can add diagnostic sensors, buttons and switched (dependent on the HA device):  

- You can easily remove these sensors by unchecking the settings checkboxes.

1. **Set a power sensor as cumulative sensor**  
For sensor and compound device you can set the device as cumulative power measurement device.  
 ![grafik](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/5/e555458e501fb5121a4b60a373c6045269c596f7.png)  
This will only work for devices, where the capability **measure\_power** is added. That’s the case when a power entity is added as sensor decvice. It’s not working if the sensor is added as additional sensor from HA devices because it’s added as subcapability measure\_power.xxx and such capabilities are not used by Homey for Energy summation.  
When using a compound, please use measure\_power as capability name.

---

_[View the full topic](https://community.homey.app/t/app-pro-home-assistant-community-app/71477)._