# \[APP\]\[Pro\] Heatit Controls app \[v4.5.0\] **URL:** \ **Category:** Apps\ **Tags:** app, z-wave, official, wifi, homey-pro\ **Created:** [July 30, 2021, 7:31am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914 "2021-07-30T07:31:56Z")\ **Posts on this page:** 20\ **Page:** 5
**Author:** ![Christianstre](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/christianstre/32/15760_2.png) [@Christianstre](https://community.homey.app/u/Christianstre)\ **Post date:** [November 13, 2021, 5:23pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/85 "2021-11-13T17:23:56Z")
Hi @ThomasV, Did you find a solution to this? ---
**Author:** ![ThomasV](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thomasv/32/33864_2.png) [@ThomasV](https://community.homey.app/u/ThomasV)\ **Post date:** [November 13, 2021, 9:40pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/86 "2021-11-13T21:40:56Z")
Problem with the unit, had to exchange it with a new one from Thermofloor. ---
**Author:** ![Vidar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/vidar/32/36938_2.png) [@Vidar](https://community.homey.app/u/Vidar)\ **Post date:** [November 15, 2021, 8:21pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/87 "2021-11-15T20:21:42Z")
Answer to off topic. Use: [Homey Developer Tools](https://tools.developer.homey.app/) ---
**Author:** ![Genuari](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/genuari/32/34255_2.png) [@Genuari](https://community.homey.app/u/Genuari)\ **Post date:** [November 15, 2021, 8:32pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/88 "2021-11-15T20:32:40Z")
Thank you! It’s a very useful tool 🙂 ---
**Author:** ![Thunstop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thunstop/32/33966_2.png) [@Thunstop](https://community.homey.app/u/Thunstop)\ **Post date:** [November 20, 2021, 12:33pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/89 "2021-11-20T12:33:49Z")
Hi I have recently had a lot of trouble with heat it electric floor heat units, I have different flows to switch between eco and comfort during the day and night. Sometimes they switch correctly and sometimes the don’t respond, when I then go to homey and try to switch them manually I get error messages with some communication error. Is this a known problem? Was working perfectly for over a year, now I have huge issue with this. Thanks in advance for the help. ---
**Author:** ![Genuari](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/genuari/32/34255_2.png) [@Genuari](https://community.homey.app/u/Genuari)\ **Post date:** [November 20, 2021, 3:43pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/90 "2021-11-20T15:43:47Z")
@Thunstop Yes, I faced the same issues with warm floors & Din 616 Relais, both by Heatit. Solved by excluding and including, but WITHOUT using 5-digit pin. Type instead of the pin “00000” - the device will pair as unsecured and will work properly. I have also disabled the auto - updates for homey & heatit app, as this bug happened after a recent app update. Good luck 🙂 ---
**Author:** ![AndreasK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreask/32/33896_2.png) [@AndreasK](https://community.homey.app/u/AndreasK)\ **Post date:** [November 20, 2021, 3:53pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/91 "2021-11-20T15:53:50Z")
Looks like I’m not te only one having problems with heatit. I have been able to include two of my Z-TRM3 units but I have one Z-TRM3 and one Z-TRM2fx that really hates me. They are impossible to include in Homey. I have tried a lot of tricks but noting works. I even bought an Aeotec Z-stick to test them with Home Assistant to compare. Home Assistant can include them without a problem. But when I try with Homey I can do the first two steps but when I expect to get the “type the pin” I get Unknown error instead. Anybody got this error and have a work around? ---
**Author:** ![Thunstop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thunstop/32/33966_2.png) [@Thunstop](https://community.homey.app/u/Thunstop)\ **Post date:** [November 20, 2021, 3:57pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/92 "2021-11-20T15:57:54Z")
Thanks for the quick response! I can’t remember that I used a pin when setting up heat it, was this inputed in homey when setting up? ---
**Author:** ![Genuari](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/genuari/32/34255_2.png) [@Genuari](https://community.homey.app/u/Genuari)\ **Post date:** [November 20, 2021, 7:55pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/93 "2021-11-20T19:55:28Z")
@AndreasK I had this kind of problems solved in the following way. 1. Put Homey reeeealy close to your device (10-50cm). I normally unplug it and connect to socket right near the device to include. 2. Wait till all Apps in Homey are loaded 3. Wait till Zwave network is reconfigured and ready. In my network it takes ca. 5mins with 20 nodes. 4. Restart Heatit device 5. Do the pairing procedure. ---
**Author:** ![Genuari](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/genuari/32/34255_2.png) [@Genuari](https://community.homey.app/u/Genuari)\ **Post date:** [November 20, 2021, 8:09pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/94 "2021-11-20T20:09:12Z")
My TrmZ-3 have small stickers with a pin code & qr code which I was requested to type in Homey during pairing. Since I type 00000 instead of the code, all 8 Heatit devices work properly, are always online, no problems at all. ---
**Author:** ![AndreasK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreask/32/33896_2.png) [@AndreasK](https://community.homey.app/u/AndreasK)\ **Post date:** [November 20, 2021, 8:38pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/95 "2021-11-20T20:38:26Z")
Thanks I’ll try tomorrow. By the way, are you swedish? You wrote ”ca” ---
**Author:** ![Genuari](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/genuari/32/34255_2.png) [@Genuari](https://community.homey.app/u/Genuari)\ **Post date:** [November 20, 2021, 9:58pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/96 "2021-11-20T21:58:07Z")
No, I’m from Germany. I think circa is Latin, no? 🙂 ---
**Author:** ![Genuari](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/genuari/32/34255_2.png) [@Genuari](https://community.homey.app/u/Genuari)\ **Post date:** [November 20, 2021, 10:07pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/97 "2021-11-20T22:07:49Z")
@HeatitControlsAB Is it planned to implement digital inputs functionality of DIN 616 in Homey? I’d like to connect pulse output of a water flow meter and count pulses within a flow in a following way: WHEN On value change of digital input THEN Variable Water\_pulse\_count=Water\_pulse\_count+1 Also I have some rather simple applications like a flood sensor or a pressure switch for a pump. ---
**Author:** ![AndreasK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreask/32/33896_2.png) [@AndreasK](https://community.homey.app/u/AndreasK)\ **Post date:** [November 21, 2021, 3:17pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/98 "2021-11-21T15:17:49Z")
Didn’t work unfortunately. @HeatitControlsAB please fix the problem with including and don’t respond with “unknown error”, thats just lacy programming. ---
**Author:** ![Teddy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/teddy/32/13818_2.png) [@Teddy](https://community.homey.app/u/Teddy)\ **Post date:** [November 21, 2021, 10:10pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/99 "2021-11-21T22:10:46Z")
I have a odd behavior that i wonder if someone have a solution for. Regardless of what setpoint or profile my z-TRM2fx refuse to get the floor heat above 20.x degree’s stays between 20 and 20,5. Example i can set it to 25 and nothing change on the floor itself. This have worked for 2 years now but something have happened. Anyone got an idea? ---
**Author:** ![Kenny\_H](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_h/32/47841_2.png) [@Kenny\_H](https://community.homey.app/u/Kenny_H)\ **Post date:** [November 26, 2021, 1:29pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/100 "2021-11-26T13:29:46Z")
Hey you guys at @HeatitControlsAB. Any news on that app update? Should we expect 4+ months’ lead time on bug fixes also next time a new version of Homey causes meltdown in your code? ---
**Author:** ![ole-nord](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ole-nord/32/18739_2.png) [@ole-nord](https://community.homey.app/u/ole-nord)\ **Post date:** [November 26, 2021, 7:24pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/101 "2021-11-26T19:24:46Z")
Hi @HeatitControlsAB , you asked me to exchange my two z-push button 4, where they could only be added as a simple z-wave device. I just got my two new ones, and i can still only add them as a simple z-wave device. Why did I have to exchange them? I’m adding a screenshot of the settings of the new device, producer ID is still 773, should it be something else? ![Screenshot_20211126-163834_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/f/9fa29cbcab084ff121fe865e4061f8f74ea6b7cf.jpeg) ---
**Author:** ![mroek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mroek/32/38044_2.png) [@mroek](https://community.homey.app/u/mroek)\ **Post date:** [November 30, 2021, 8:54pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/102 "2021-11-30T20:54:53Z")
I have added the Z-TEMP2 to my Homey, but it doesn’t sync the temperature setting between the thermostat and the app (changing in the app does not affect the thermostat and vice versa). I can turn it on or off through the app, and all settings can be changed as expected. Any hints on what could cause this? I’m using the beta/test version of the app (to get proper support for the ZM Single Relay 16A). ---
**Author:** ![Edwin\_D](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_d/32/136417_2.png) [@Edwin\_D](https://community.homey.app/u/Edwin_D)\ **Post date:** [November 30, 2021, 9:45pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/103 "2021-11-30T21:45:23Z")
Seems similar to issues mentioned here: > > > I was not able to connect my Z-Push 8 device to Homey. It ended up being added a…s a simple Z-Wave device. After looking at the current source-code I found that the list of manufacturers was missing the ID reported by my device. When adding 773 to the list of manufacturers in driver.compose.json it worked like a charm for me. > I have tested this for a Z-Push Button 8 only, but I guess this is the same issue with all HeatIT devices. > > /Morten Enholm ---
**Author:** ![Martijn\_C](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_c/32/39993_2.png) [@Martijn\_C](https://community.homey.app/u/Martijn_C)\ **Post date:** [November 30, 2021, 10:44pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/104 "2021-11-30T22:44:06Z")
Did you add it unsecure? I have added five, without issues. [Previous page](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914.md?page=4) [Next page](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914.md?page=6)