# \[APP\]\[Pro\] Heatit Controls app \[v4.5.0\] **URL:** \ **Category:** Apps\ **Tags:** app, z-wave, official, wifi, homey-pro\ **Created:** [July 30, 2021, 7:31am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914 "2021-07-30T07:31:56Z")\ **Posts on this page:** 20\ **Page:** 10
**Author:** ![Torbjorn\_Melbye](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/torbjorn_melbye/32/18194_2.png) [@Torbjorn\_Melbye](https://community.homey.app/u/Torbjorn_Melbye)\ **Post date:** [September 2, 2022, 9:12am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/187 "2022-09-02T09:12:03Z")
I have three heatit z-trm3 thermostats. On one of them I have an issue. Heating goes idle way before it has reached the desired temperature. If I set the temperature higher, then back to my original setpoint, heating is resumed but goes idle again after a while. See screenshots below. Am I missing something? ![Screenshot_2022-09-02-11-08-33-18_4bbfc4a7dd885a2bb189f300112a7ed4](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/d/1d8870f859739f28b67d058b9111a96e504851f4.jpeg) ![Screenshot_2022-09-02-11-08-28-21_4bbfc4a7dd885a2bb189f300112a7ed4](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/d/5dbd56417baf21d55dba6301aee9dd88e50fdfd6.jpeg) ---
**Author:** ![HeatitControlsAB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heatitcontrolsab/32/43240_2.png) [@HeatitControlsAB](https://community.homey.app/u/HeatitControlsAB)\ **Post date:** [September 2, 2022, 10:14am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/188 "2022-09-02T10:14:40Z")
Hello, has the thermostat Sensor mode been changed recently? Or is the thermostat just installed? ---
**Author:** ![Torbjorn\_Melbye](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/torbjorn_melbye/32/18194_2.png) [@Torbjorn\_Melbye](https://community.homey.app/u/Torbjorn_Melbye)\ **Post date:** [September 2, 2022, 10:15am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/189 "2022-09-02T10:15:53Z")
Hi, thank you for your reply. Yes, all three have recently been installed and activated. Around 48 hours. ---
**Author:** ![HeatitControlsAB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heatitcontrolsab/32/43240_2.png) [@HeatitControlsAB](https://community.homey.app/u/HeatitControlsAB)\ **Post date:** [September 2, 2022, 10:22am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/190 "2022-09-02T10:22:47Z")
After installation the thermostat uses a few days to calibrate the internal sensor, during this time the thermostat will be only be ON for 75% of the time. ---
**Author:** ![Torbjorn\_Melbye](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/torbjorn_melbye/32/18194_2.png) [@Torbjorn\_Melbye](https://community.homey.app/u/Torbjorn_Melbye)\ **Post date:** [September 2, 2022, 10:25am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/191 "2022-09-02T10:25:07Z")
Ok, I see. Thank you. Guess it will work itself out then šŸ˜Œ ---
**Author:** ![Mapap](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mapap/32/9413_2.png) [@Mapap](https://community.homey.app/u/Mapap)\ **Post date:** [September 7, 2022, 10:27am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/192 "2022-09-07T10:27:55Z")
Since the update to v3.4.0 the app does not seem to display the current temperature anymore, itā€™s stuck at 0c. After restarting only 1 of 3 thermostats displays the current temperature. It seems to be only a display issue, since the thermostats donā€™t try to heat to the target temperature of (currently) 5c. Only once I set the target temp to something above ambient temp, like 25c when ambient is 20c, the thermostat will switch heating to ā€œonā€. Anyone else experiencing the same? Update: After a couple of app restarts, I seem to be able to read all temps again. Not sure what the problem was. ---
**Author:** ![tokreutz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tokreutz/32/35333_2.png) [@tokreutz](https://community.homey.app/u/tokreutz)\ **Post date:** [September 8, 2022, 5:56pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/193 "2022-09-08T17:56:38Z")
Hi, I have the Z-Smoke battery version, and after it has been added to Homey, the ā€œZ-wave device information\secureā€ has an ā€˜xā€™, indicating it is not added secure. This makes it impossible for me to control other S2 secure devices using associations. Is this intended, or am I doing something wrong when I add the device to Homey? I have tried to associate it with an Aeotec Siren 6 with no luck, assuming it is due to the lack of S2 security. ---
**Author:** ![HeatitControlsAB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heatitcontrolsab/32/43240_2.png) [@HeatitControlsAB](https://community.homey.app/u/HeatitControlsAB)\ **Post date:** [September 9, 2022, 7:20am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/194 "2022-09-09T07:20:37Z")
Hi, If you press the homey instead of heatit controlls when including your Z-Smoke. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/b/abca58f4ae1c07d6bef7e63c9ab2bb2ad0e77674.png) The device will be added with S2 security. ---
**Author:** ![vegmag](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/vegmag/32/59549_2.png) [@vegmag](https://community.homey.app/u/vegmag)\ **Post date:** [September 11, 2022, 7:07pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/195 "2022-09-11T19:07:27Z")
I installed a Z-relay 25A a few weeks ago, but I canā€™t get it to send the meter report / energy data for the connected load. It reports the accumulated energy consumed, but not current, voltage or power. Itā€™s included unsecure (I have also tried exclude - factory reset - re-include using the Heatit app) but no change. Any ideas? ---
**Author:** ![Dam-Ien](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dam-ien/32/57469_2.png) [@Dam-Ien](https://community.homey.app/u/Dam-Ien)\ **Post date:** [September 18, 2022, 7:22am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/196 "2022-09-18T07:22:15Z")
Hello, On my two Z-TEMP2, I can set the temperature with a hysteresis of 1Ā° (18Ā°, 19Ā°, 20Ā°ā€¦) Can we have a set point with a precision of 0,5Ā°? For example, 19Ā° in the morning, and 19,5Ā° at noon. The setpoints are controlled by homey heating scheduler. Thank you, ---
**Author:** ![Steven\_Mollema](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/steven_mollema/32/21128_2.png) [@Steven\_Mollema](https://community.homey.app/u/Steven_Mollema)\ **Post date:** [September 19, 2022, 10:18am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/197 "2022-09-19T10:18:46Z")
> [@HeatitControlsAB](#): > > Z-TRM3 does not support ECO or COOLING mode, so this will not be possible. Is it possible that you add this function in homey to the Z-TRM3 thermostat in the future. Then the user can decide for themselves whether they want to use this trigger or not. Thermostat mode : automatic/heating/cooling/off ---
**Author:** ![HeatitControlsAB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heatitcontrolsab/32/43240_2.png) [@HeatitControlsAB](https://community.homey.app/u/HeatitControlsAB)\ **Post date:** [September 21, 2022, 6:47am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/198 "2022-09-21T06:47:27Z")
Hi, We have seen some problems with the Z-Relay in Homey not showing voltage or current. To show power try to set the association 1,1 in group 1 of the device. If this does not work try 1 in group 1 instead. ---
**Author:** ![HeatitControlsAB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heatitcontrolsab/32/43240_2.png) [@HeatitControlsAB](https://community.homey.app/u/HeatitControlsAB)\ **Post date:** [September 21, 2022, 6:54am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/199 "2022-09-21T06:54:12Z")
Hi, This is not possible as the setpoint on the device itself is operating on whole numbers. ---
**Author:** ![HeatitControlsAB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heatitcontrolsab/32/43240_2.png) [@HeatitControlsAB](https://community.homey.app/u/HeatitControlsAB)\ **Post date:** [September 21, 2022, 6:55am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/200 "2022-09-21T06:55:50Z")
Hi, As said earlier, this is not possible as the thermostat does not have this function, therefor it is not possible to work around or integrate the feature. ---
**Author:** ![krfr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krfr/32/48939_2.png) [@krfr](https://community.homey.app/u/krfr)\ **Post date:** [September 24, 2022, 9:11am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/201 "2022-09-24T09:11:45Z")
Sorry for maybe a trivial question, but how to I perform the inclusion process so that it asks for the DSK code? Want to add my ZTRM3 as insecure, but each time I run the inclusion it do not prompt for DSK and just adds them as secure. Thanks! ---
**Author:** ![Arnt\_Soloy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arnt_soloy/32/58318_2.png) [@Arnt\_Soloy](https://community.homey.app/u/Arnt_Soloy)\ **Post date:** [September 24, 2022, 10:13am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/202 "2022-09-24T10:13:51Z")
> [@\[APP\]\[Pro\] UnZ-Cure (add z-wave devices unsecure)](https://community.homey.app/t/app-pro-unz-cure-add-z-wave-devices-unsecure/55597): > > Add Z-wave devices unsecure Z-wave associations are a very important. The main reason is that if Homey isnā€™t working for some reason, the lights can still be controlled. As of version 7.0, Homey supports more z-wave security levels. That is great for locks and such, but not so much for z-wave associations, because associations need the same security level for both associated devices in order to work. As not all devices support the same security level, and Homey picks the security level based ā€¦ ---
**Author:** ![HeatitControlsAB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heatitcontrolsab/32/43240_2.png) [@HeatitControlsAB](https://community.homey.app/u/HeatitControlsAB)\ **Post date:** [September 26, 2022, 7:59am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/203 "2022-09-26T07:59:55Z")
Hi, To include the TRM3 in security chose the homey app instead of Heatit controls when adding the device ---
**Author:** ![krfr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krfr/32/48939_2.png) [@krfr](https://community.homey.app/u/krfr)\ **Post date:** [October 3, 2022, 3:19pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/204 "2022-10-03T15:19:54Z")
> [@HeatitControlsAB](#): > > RM3 in security chose the homey app instead of Heatit controls when adding the device What do yoy mean with using the Homey app instad of Heatit controls? Please elaborate. ---
**Author:** ![HeatitControlsAB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heatitcontrolsab/32/43240_2.png) [@HeatitControlsAB](https://community.homey.app/u/HeatitControlsAB)\ **Post date:** [October 6, 2022, 7:14am UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/205 "2022-10-06T07:14:55Z")
> [@krfr](#): > > What do yoy mean with using the Homey app instad of Heatit controls? Please elaborate. When adding a new device you are prompted with these choices: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/d/dd702d807f0fa827989dfc5f60f6e377869a6e6d.png) Heatit Controls and Homey App Refers to this. ---
**Author:** ![Exerqtor](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/exerqtor/32/27144_2.png) [@Exerqtor](https://community.homey.app/u/Exerqtor)\ **Post date:** [October 10, 2022, 8:33pm UTC](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914/206 "2022-10-10T20:33:42Z")
Still no fix for the issues with Z-Relay? Iā€™ve tried everything now when it comes to different group settings. But I still canā€™t get mine to show anything more than the reading for Sensor1. [Previous page](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914.md?page=9) [Next page](https://community.homey.app/t/app-pro-heatit-controls-app-v4-5-0/49914.md?page=11)