# \[APP\]\[Pro\] \< group \> (3.2.4 - Stable) **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [October 23, 2018, 4:16pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168 "2018-10-23T16:16:01Z")\ **Posts on this page:** 20\ **Page:** 13
**Author:** ![Jamie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jamie/32/5274_2.png) [@Jamie](https://community.homey.app/u/Jamie)\ **Post date:** [October 11, 2020, 5:03am UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/251 "2020-10-11T05:03:01Z")
> [@MagTer](#): > > o and I’m starting from scratch with Homey v5. > Most devices work fine but when i get to grouping them, i run into issues. > > When adding the \< group \> device i follow the guide and select Lights, basic onoff feature set, add devices and then get to the page for selecting an icon but there are no icons to choose from. > > If I just press continu Hey everyone, I have not personally seen this issue on v5, it also doubt that it is a ‘group’ bug. Likely something pretty deep in with in the firmware. @MarcoRuiter mentioned on github that Athom might already be looking into this. Simple truth is I have just the one Homey which I use to run my home, adding remove/group isn’t a task I can test with out upsetting my wife. I look forward to buying a pro when they become available in my region (AU) so I can test for issues like this in the future. Thanks ---
**Author:** ![MagTer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/magter/32/107154_2.png) [@MagTer](https://community.homey.app/u/MagTer)\ **Post date:** [October 11, 2020, 5:03pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/252 "2020-10-11T17:03:17Z")
> [@Jamie](#): > > Likely something pretty deep in with in the firmware. @MarcoRuiter mentioned on github that Athom might already be looking into this. @Jamie Any reference to github where you have seen this comment from @MarcoRuiter? Regarding the wife comment, I sure can relate to this as I am in the middle of the migration now 😛 ---
**Author:** ![Dutchdevil](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dutchdevil/32/19929_2.png) [@Dutchdevil](https://community.homey.app/u/Dutchdevil)\ **Post date:** [October 14, 2020, 2:23pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/253 "2020-10-14T14:23:40Z")
Can someone please fix this app for v5 ? Can’t create groups because icons not showing and app crashes after that (Homey version 2018 and firmware v5.0 RC). Is there a test version with SDK3 api use? ---
**Author:** ![AlainMic](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/alainmic/32/30015_2.png) [@AlainMic](https://community.homey.app/u/AlainMic)\ **Post date:** [October 14, 2020, 4:19pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/254 "2020-10-14T16:19:15Z")
Hello. I have a problem regrouping my Somfy RTS roller shutters. Each roller shutter works well with Homey but I can’t seem to group them together. I installed the app and, after clicking on , Homey offers me to choose the type of device to group. I choose “Blinds” and I end up on a list in which I can only choose the 3rd line “Window coverings state” (the others do nothing). Then I can choose which panes to group but when I want to operate the shutter group, I get an error message “cannot read property ‘windowcoverings\_state’ of undefined”. What can I do ? Thank you for your help. ---
**Author:** ![Jamie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jamie/32/5274_2.png) [@Jamie](https://community.homey.app/u/Jamie)\ **Post date:** [October 15, 2020, 10:53am UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/255 "2020-10-15T10:53:13Z")
> [@AlainMic](#): > > Each roller shutter works well with Homey but I can’t seem to group them together. I installed the app and, after clicking on , Homey offers me to choose the type of device to group. I choose “Blinds” and I end up on a list in which I can only choose the 3rd line “Window coverings state” (the others do nothing). Then I can choose which panes to group but when I want to operate the shutter group, I get an error message “cannot read property ‘windowcoverings\_state’ of undefined”. Im current running on version 5, I am able to add items, with out an errors. However I do get the same issues as @AlainMic, but if I restart the app after adding a group the group then works correctly. Does this also fix the problem for you? Editing an existing group works as expected (for me). I haven’t see the sql error unfortunately. ---
**Author:** ![AlainMic](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/alainmic/32/30015_2.png) [@AlainMic](https://community.homey.app/u/AlainMic)\ **Post date:** [October 15, 2020, 4:07pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/256 "2020-10-15T16:07:10Z")
No, sorry, it still doesn’t work. I created a group with 2 roller shutters, I closed the Homey app, then I reopened it, and it doesn’t work. When I choose “blinds” or “window coverings” then I have a list where I cannot choose an option to raise or lower my shutters. The only option that then allows you to choose the shutters is “windows coverings state” … and it is therefore normal that the grouping of the two shutters does not work when I press the Up or Down button. ---
**Author:** ![the\_MANAGER](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/the_manager/32/29310_2.png) [@the\_MANAGER](https://community.homey.app/u/the_MANAGER)\ **Post date:** [October 20, 2020, 8:40pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/257 "2020-10-20T20:40:30Z")
> [@AlainMic](#): > > I closed the Homey app c’mon, he was talking about restarting the [group] app from within/inside the Homey app, not closing and restarting the actual Homey app. Also try this: 1. restart Homey, the device (more → settings → general → restart homey), wait at least 2 minutes (my case, with homey pro … the device restarts in 8 seconds, but the installed apps take longer) 2. restart the [group] app, (more → apps → [group] → cog icon → restart app), wait at least 5 seconds (my case) ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [October 21, 2020, 1:04pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/258 "2020-10-21T13:04:30Z")
Homey’s Firmware update to 5.0.0-rc.38 has fixed the not showing of icons and subsequent sql error for me. Adding a new device is working again. It is however needed to stop and start the app before the device can be used. ---
**Author:** ![Jamie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jamie/32/5274_2.png) [@Jamie](https://community.homey.app/u/Jamie)\ **Post date:** [November 14, 2020, 12:52am UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/259 "2020-11-14T00:52:32Z")
Any update on how it’s performing on the release candidate? There is nothing in v5 that “should” break it, or require the app to restart … If you start sending diagnostic reports when I test it it will be easier to fix ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [November 17, 2020, 8:07am UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/260 "2020-11-17T08:07:15Z")
> [@Jamie](#): > > Any update on how it’s performing on the release candidate? I’m happy to report it is working fine for me. I have groups for curtains, blinds, lights and temperature sensors and all. I’m using v5-rc 38. ---
**Author:** ![AlainMic](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/alainmic/32/30015_2.png) [@AlainMic](https://community.homey.app/u/AlainMic)\ **Post date:** [November 26, 2020, 5:46pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/261 "2020-11-26T17:46:01Z")
Good morning all My version of Homey is : 5.0.0-rc.22, and I can’t update it. And so still doesn’t work! When I click on Update, Homey tells me the app is up to date. What to do ? ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [November 26, 2020, 6:31pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/262 "2020-11-26T18:31:05Z")
Turn experimental back on ---
**Author:** ![AlainMic](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/alainmic/32/30015_2.png) [@AlainMic](https://community.homey.app/u/AlainMic)\ **Post date:** [November 26, 2020, 6:53pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/263 "2020-11-26T18:53:52Z")
Excuse me but I don’t speak English well and I did not understand your answer (even after the translation into French). Can you detail a little bit ? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [November 26, 2020, 7:01pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/264 "2020-11-26T19:01:59Z")
> **[Homey Developer](https://developer.athom.com/tools/settings)** Turn experimental on ---
**Author:** ![AlainMic](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/alainmic/32/30015_2.png) [@AlainMic](https://community.homey.app/u/AlainMic)\ **Post date:** [November 26, 2020, 7:33pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/265 "2020-11-26T19:33:47Z")
Perfect, thank you, I understood correctly. ---
**Author:** ![CB83](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cb83/32/30125_2.png) [@CB83](https://community.homey.app/u/CB83)\ **Post date:** [November 29, 2020, 11:00am UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/266 "2020-11-29T11:00:53Z")
Running 4.2.0 and just downloaded the group app. Trying to make an alarms for the battery level on a aqara window /door sensor, but i get a fail that says " unknown error, invalid class"… Anyone know what’s wrong? ---
**Author:** ![CB83](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cb83/32/30125_2.png) [@CB83](https://community.homey.app/u/CB83)\ **Post date:** [November 30, 2020, 3:12pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/267 "2020-11-30T15:12:55Z")
Hmm, i see om using 2.4.202, and not 2.4.2 that seems like the latest release. How can i update it manually? ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [November 30, 2020, 5:41pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/268 "2020-11-30T17:41:57Z")
> [@CB83](#): > > using 2.4.202 Now in the AppStore, seems to be the last version: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/3/831f3f4add8d4538dcac2df1da3423048562909f.png) ---
**Author:** ![CB83](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cb83/32/30125_2.png) [@CB83](https://community.homey.app/u/CB83)\ **Post date:** [November 30, 2020, 5:47pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/269 "2020-11-30T17:47:23Z")
According to first post 2.4.202 is beta and 2.4.2 is Stable . Can’t make any groups as i all the time get some sort of error ---
**Author:** ![CB83](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cb83/32/30125_2.png) [@CB83](https://community.homey.app/u/CB83)\ **Post date:** [November 30, 2020, 6:19pm UTC](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168/271 "2020-11-30T18:19:28Z")
To bad. Then i have no idea why it’s not working. Can’t make a group with temperature sensors, or a group of battery devices for instance [Previous page](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168.md?page=12) [Next page](https://community.homey.app/t/app-pro-group-3-2-4-stable/3168.md?page=14)