# \[APP\]\[Pro\] go-e Charger **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro, sdk3\ **Created:** [December 27, 2022, 3:57pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195 "2022-12-27T15:57:00Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 10, 2023, 8:27am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/21 "2023-01-10T08:27:29Z")
> [@Picsou621](#): > > Just make sure there is no conflict in the THEN cards, for example if someone is using simultaneously both THEN cards _Set single phase charging to **YES** _ and _Set three phase charging to **YES** _. That is a good point. I would then deprecate the `Set single phase charging to` card and introduce a new one for the phase selection action. I.e. `Set charging phases to [[num_phases]]` where num\_phases is an enum that can be 1 or 3. > [@Picsou621](#): > > Did you find out how to choose intermediate values (without using a variable…) like 7A or 9A for example, in the THEN cards? Indeed, there is value slider stepping of 2, I will fix that to stepping of 1. Not really sure why it became like that. ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 11, 2023, 6:54am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/22 "2023-01-11T06:54:04Z")
Simplifying Phase controlling flow cards towards: The “Single phase” cards will be deprecated and replaced with “Set phases” cards as shown in these flow samples: ![Screenshot 2023-01-11 at 8.24.03](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/d/0dc417b3f930cbddf481824947a89d185cec54a6.jpeg) In the UI there will be buttons as was described earlier to set Single Phase or Three phase. ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 11, 2023, 6:56am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/23 "2023-01-11T06:56:46Z")
# New update (live: [2.5.3](https://homey.app/en-us/app/com.go-e.charger/go-e-Charger/)) > ## Changes in test > > - **ADD** : [Quick action to toggle charging allowed from the tile.](https://community.homey.app/t/app-pro-go-e-charger-electric-car-charger/14162/128) @Tim_Willemsen > - **UI** : _Allow charging_ as toggle button with custom icon. Works also from the tile as “Toggle”. > > - **BREAK** : Deprecated V3/V4 devices _Single Phase Charging_ flow cards > - **ADD** : Simplified V3/V4 devices phase control flow cards → _Set charging phases…_ / _Number of phases_ > - **ADD** : UI Button to set _Three phase charging_, this toggles also _Single phase charging_ button German translations still need check up help: [see previous post about translations](https://community.homey.app/t/74195/4). ---
**Author:** ![Tim\_Willemsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tim_willemsen/32/9973_2.png) [@Tim\_Willemsen](https://community.homey.app/u/Tim_Willemsen)\ **Post date:** [January 11, 2023, 10:12am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/24 "2023-01-11T10:12:39Z")
That’s great, thanks. My wife teaches German in highschool over here, I’ll see if she would do a check. ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 16, 2023, 10:28am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/25 "2023-01-16T10:28:51Z")
# New update (live: [2.5.4](https://homey.app/a/com.go-e.charger/)) > ## Changes in test > > - **ADD** : Current Limiting is now checked for the device maximum (16A or 32A). ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [March 24, 2023, 5:26pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/26 "2023-03-24T17:26:59Z")
# New update (live: [2.5.5](https://homey.app/a/com.go-e.charger/)) > ## Changes in test > > - **FIX** : Homey Pro 2023 - Invalid capability “current\_limit” ---
**Author:** ![Patronick](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patronick/32/33950_2.png) [@Patronick](https://community.homey.app/u/Patronick)\ **Post date:** [May 28, 2023, 11:14am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/27 "2023-05-28T11:14:44Z")
Hello unfortunately go-e charger app for homey pro 2019 showed me today error and it is not working at all because there is some problem in temperature. After my go-e charger increases temp to more than 50 degrees the device is unavailable and shows this error: Measured temperature out of rangeerror:51is greater than 50 (out\_of\_range) Go-e cahrger is still working. After the temp decreases less than 50 °C it is back working in homey. Could somebody help me please fix this? Thanks a lot Patrick ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [May 28, 2023, 1:34pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/28 "2023-05-28T13:34:17Z")
# New update (live: [2.5.6](https://homey.app/a/com.go-e.charger/)) > ## Changes include > > - **FIX** : Increase “measure\_temperature” capabilities max value to 70C. @Patronick , test version has a fix to the max value for temperature. You can install test version, or wait for Athom to approve the new version to live version. ---
**Author:** ![Patronick](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patronick/32/33950_2.png) [@Patronick](https://community.homey.app/u/Patronick)\ **Post date:** [May 29, 2023, 8:22am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/29 "2023-05-29T08:22:49Z")
Thanks for a great job! Can’t imagine how long takes Athom to improve a new version if we speakabout hours,days, weeks… so I will see… than youso much and have a great day! ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [June 30, 2023, 11:32am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/30 "2023-06-30T11:32:47Z")
Hi, ist this app only compatible with go-e or also with Fronius Wattpilot charger (that seems to be identical)? > **[Efficient and sustainable: Charging electric cars with PV surplus](https://www.fronius.com/en-gb/uk/solar-energy/installers-partners/infocentre/blog/charging-electric-cars-with-pv-surplus)** > > Thanks to dynamic PV surplus charging, it is possible to charge your car with the maximum amount of PV energy using the Fronius Wattpilot. ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [June 30, 2023, 12:19pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/31 "2023-06-30T12:19:31Z")
I wonder, if the API is similar, maybe. If the Fronius mobile app is near the go-e app, then you could try: enable API v2 from “Advanced Settings” and try to go to [http://IPADDRESS/api/status](http://IPADDRESS/api/status) and PM the output to me, if anything. If there is API v1 only, then try [http://IPADDRESS/status](http://IPADDRESS/status) If that results in an error, then Fronius has their own firmware with different API and are not compatible with go-e App. ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [June 30, 2023, 12:37pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/32 "2023-06-30T12:37:08Z")
Thanks. I get the charger next days hopefully and will try and give you a feedback. ---
**Author:** ![Picsou621](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/picsou621/32/15357_2.png) [@Picsou621](https://community.homey.app/u/Picsou621)\ **Post date:** [June 30, 2023, 2:28pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/33 "2023-06-30T14:28:19Z")
As far as the charging station is concerned, the hardware is the same between Fronius and Go-e (Fronius simply re-brands Go-e stations), but not the software. Actually, several years ago when Fronis released this charging station, it simultaneously released the Fronius smartmeter, which communicates directly with the station and enables electric vehicles to be charged using excess power. If that’s what you want to do, you might as well buy a Fronius smartmeter that communicates perfectly with the Fronius charger. Connecting your charger to Homey would be of little use because if you only want to start or stop a charge manually or with simple programming, the Fronius app will do that just fine. The problem is that the Go-e chargers also came out several years ago, but the compatible smartmeter only came out a few weeks ago. But as Go-e’s policy was to open up its system completely (unlike Fronius, which does everything it can to keep its ecosystem closed…), it became very interesting to have an app compatible with the Go-e charger, in order to programme charging using excess power, [as I’ve done here, for example](https://community.homey.app/t/charging-ev-with-advanced-flows/66223/1). That’s it, I think it was important to give this little background to understand the very different policies of the two companies, and why it’s very useful to have an app for the Go-e charger and not necessarily for the Fronius charger for those who already have a Fronius smartmeter. Once again, many thanks to Tapio Heiskanen for this excellent app. ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [June 30, 2023, 2:38pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/34 "2023-06-30T14:38:46Z")
I have Fronius ecosystem (Gen24 inverter, BYD battery) and the charger is coming (even without having a car now, but that will be the next :-)). I hope Fronius is doing all right automatically (surplus loading) but I would love to change settings via Homey. So I checked what could be compatible. I’ll check this out when all is installed 👍 ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [July 7, 2023, 7:51pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/35 "2023-07-07T19:51:04Z")
The wallbox returns only “Nothing matches the given URI” pn both URLs. But reading this thread it should be really similar to go-e > **[Fronius Wattpilot](https://community.home-assistant.io/t/fronius-wattpilot/403118/13)** > > Hey, Not sure which files you extracted, but the content of your custom\_components/wattpilot folder should look like in the following screenshot - so you defenitely have the wrong files in there 😉 Just fyi > **[GitHub - mk-maddin/wattpilot-HA: This is a custom component to allow control...](https://github.com/mk-maddin/wattpilot-HA#known-errors)** > > This is a custom component to allow control of Fronius Wattpilot wallbox/electro vehicle charging devices in Homeassistant. - GitHub - mk-maddin/wattpilot-HA: This is a custom component to allow co... ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [July 8, 2023, 3:26am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/36 "2023-07-08T03:26:11Z")
Could try what `http:///wp` returns? But what I see, the Wattpilot is ondeed slightly drifferent, I.e. Would be a new device type. It might be best to implement this as it’s own app. ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [July 8, 2023, 9:12pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/37 "2023-07-08T21:12:36Z")
No result on this URL, too. But thanks for taking a look at it. I also think a new apps would be best. First I try the HA integration. With my HA community app I can get all entities easily into Homey. And perhaps if I have too much free time I can create a Homey app 🙂 ---
**Author:** ![peltsi51](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peltsi51/32/12564_2.png) [@peltsi51](https://community.homey.app/u/peltsi51)\ **Post date:** [July 12, 2023, 9:29am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/38 "2023-07-12T09:29:36Z")
Hi @OH2TH I have a problem with the condition card “charging”. I have couple of times noticed that all the sudden it doesn’t work. It doesn’t happen often but sometimes. The go-e charging device shows that the charging is active, but the condition card doesn’t go through. Also the status page of the go-e charger shows that the value of the car connection “car” is 2, which means it’s charging. Diagnostic report e04c3713-3fe6-4d4a-b71a-1b35baec99c1 v2 go-e charger Homey version 8.1.6 Go-e app version 2.5.7 EDIT: After I stopped the charging and started again the condition card started working. ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [July 12, 2023, 10:34am UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/39 "2023-07-12T10:34:26Z")
Thanks for the information, I will have a look at this, however now I’m on vacation and travelling so when I return in August. @peltsi51 , When that happens again, please check they Homey GUI for your device from state screen what state the app thinks : ![Screenshot 2023-07-12 at 15.24.56](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/b/ab043007529670b3804ed0b4d314dbd08953880a.jpeg) The condition card should respect the state from there. The logic for that status is: No car connected - set is\_connected = false - set is\_charging = false Car charging - set is\_connected = true - set is\_charging = true Waiting for auth - set is\_connected = true - set is\_charging = false Car stopped charging - set is\_connected = true - set is\_charging = false ---
**Author:** ![peltsi51](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peltsi51/32/12564_2.png) [@peltsi51](https://community.homey.app/u/peltsi51)\ **Post date:** [July 12, 2023, 1:33pm UTC](https://community.homey.app/t/app-pro-go-e-charger/74195/40 "2023-07-12T13:33:06Z")
It was saying “Charging” in that screen. [Previous page](https://community.homey.app/t/app-pro-go-e-charger/74195.md?page=1) [Next page](https://community.homey.app/t/app-pro-go-e-charger/74195.md?page=3)