# \[APP\]\[Pro\] Fritzbox Bridge **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [April 2, 2019, 10:48pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334 "2019-04-02T22:48:33Z")\ **Posts on this page:** 16\ **Page:** 9
**Author:** ![Kalle-M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kalle-m/32/123241_2.png) [@Kalle-M](https://community.homey.app/u/Kalle-M)\ **Post date:** [July 3, 2025, 9:19pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/163 "2025-07-03T21:19:33Z")
Update: After several minor actions, it now seems to work: - FritzBox user password updated on both sides - Refresh interval set to 10 seconds - Bridge app restarted (probably the crucial point) ---
**Author:** ![Kalle-M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kalle-m/32/123241_2.png) [@Kalle-M](https://community.homey.app/u/Kalle-M)\ **Post date:** [July 13, 2025, 8:45pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/164 "2025-07-13T20:45:55Z")
I have seen an example of Rollotron DECT control via the FritzBox and wanted to use this possibility. Now i can see the blinds control added to the FritzBox Smart Home page and i am able to move up / down and to defined percentage levels. But i cannot add this device to Homey Pro using the FritzBox Bridge. The first dialogue window is telling me i have to wait for new devices, the next states there are no new devices. What is going wrong here? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/d/adf5bbac438fa0aa8f755f04e5b15070f0e9eab5.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/2/722f1c322c08a8f4346f9ad16875d2f9657c6187.png) Same action tested with the mobile app ends up with “error requesting information”. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/1/b156fac9839516f79aea2424fa269568cbe8eace.png) Diagnosis report is available, see code no. 748c84b2-fd2b-4df9-b6cd-5cdade317be7. ---
**Author:** ![rosei](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rosei/32/48883_2.png) [@rosei](https://community.homey.app/u/rosei)\ **Post date:** [July 16, 2025, 3:50am UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/165 "2025-07-16T03:50:28Z")
I am currently testing the new operating system in the beta version. I have a mesh network with additional Fritzboxes. So far, I have been able to switch the data from the Dect devices connected not only to the central unit but also to the other Fritzboxes without any problems and view the data (e.g., temperature). With the beta version, this works with the Dect devices connected to the central unit, but not with the devices connected to the other boxes. These are visible in the AVM app. Even reconfiguring the devices does not change anything. I have already sent a message to AVM. ---
**Author:** ![osteinhauer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osteinhauer/32/79205_2.png) [@osteinhauer](https://community.homey.app/u/osteinhauer)\ **Post date:** [July 30, 2025, 5:47pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/166 "2025-07-30T17:47:28Z")
I noticed the same error, but doing what you described doesn’t help me. ---
**Author:** ![osteinhauer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osteinhauer/32/79205_2.png) [@osteinhauer](https://community.homey.app/u/osteinhauer)\ **Post date:** [July 31, 2025, 7:34am UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/167 "2025-07-31T07:34:36Z")
After randomly switching from experimental to stable and vise versa it started working again. No clue what happened. ---
**Author:** ![puschie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/puschie/32/8422_2.png) [@puschie](https://community.homey.app/u/puschie)\ **Post date:** [August 1, 2025, 11:26am UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/168 "2025-08-01T11:26:58Z")
Hi, just released the new Test-Version 0.10.12 - this supports fritzbox os 8.1+ Please check if this solves the login / device list problems ---
**Author:** ![Kalle-M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kalle-m/32/123241_2.png) [@Kalle-M](https://community.homey.app/u/Kalle-M)\ **Post date:** [August 1, 2025, 3:14pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/169 "2025-08-01T15:14:05Z")
I installed the currently available test version 0.11.0 and was facing the same issues that the Rollotron blinds control were not detected as new devices. I am using pre-defined FritzBox templates as a workaround, including specific closing levels. This is working fine. ---
**Author:** ![rosei](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rosei/32/48883_2.png) [@rosei](https://community.homey.app/u/rosei)\ **Post date:** [August 2, 2025, 1:55pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/170 "2025-08-02T13:55:14Z")
With the new version (0.11.0), everything works again without any problems. ---
**Author:** ![Michael\_Fritzsche](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/michael_fritzsche/32/96689_2.png) [@Michael\_Fritzsche](https://community.homey.app/u/Michael_Fritzsche)\ **Post date:** [August 2, 2025, 5:55pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/171 "2025-08-02T17:55:23Z")
Since updating to the latest version, I’m being flooded with messages about devices leaving and rejoining the network. I consistently have around 100 active devices, but the ones reported as ‘joining’ or ‘leaving’ were never actually offline. These appear to be false positives. abfb94ac-163f-4c3d-aa65-fda45f106ce1 ---
**Author:** ![Smart4home](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/smart4home/32/80637_2.png) [@Smart4home](https://community.homey.app/u/Smart4home)\ **Post date:** [August 24, 2025, 11:17pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/172 "2025-08-24T23:17:23Z")
Hey everyone, I just installed a FRITZ!Smart Control 350 (door/window sensor). - In the FRITZ! Smart Home app I can see the status very clearly, e.g. “geschlossen seit gestern, 19:38”. - In Homey, however, I only see generic values like Allgemeiner Alarm = Nein and sometimes strange timestamps (e.g. 1970-01-21 for “Alarm Zustandsänderung”). 👉 My question: Is there a way to expose the actual open/closed state (with last-changed timestamp) in Homey, just like the FRITZ! app shows? Does the integration already map this to a capability like alarm\_contact or windowcoverings\_state (and maybe I’m just not seeing it), or is support for this device type still missing in the FRITZ!Box bridge app? Thanks a lot in advance! ![IMG_1865](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/a/1a700b82effe8f5213b5658b66b35868d6b9c408.jpeg) ![IMG_1866](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/e/ae0087236deedcbddb9fbbb25b304cc3defa1569.jpeg) ---
**Author:** ![QuantenNiffler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/quantenniffler/32/121620_2.png) [@QuantenNiffler](https://community.homey.app/u/QuantenNiffler)\ **Post date:** [December 22, 2025, 10:42am UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/173 "2025-12-22T10:42:11Z")
Hello. I have the **Fritz!Smart Energy 250.** It is recognised as a Sensor but I can’t persuade homey to use the metrics as input for the Energy View as the primary E-Meter of my home. Would be a great addition. If it already works and I’m just too stupid: please help 😄 ---
**Author:** ![Anno1960](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/anno1960/32/120855_2.png) [@Anno1960](https://community.homey.app/u/Anno1960)\ **Post date:** [February 22, 2026, 11:10am UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/174 "2026-02-22T11:10:07Z")
Hello, Im trying to connect my FRITZ!Powerline 546E to Homey, but the app says “no new devices found”. Are there any known issues with 546E and this app? Thanks. ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [May 24, 2026, 2:00pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/175 "2026-05-24T14:00:49Z")
Would it also be possible to add my 1220E/1260E PowerLine devices, @puschie? Would be great if I could let them restart by Homey, if needed… If so; I would be happy to help and procide you with any informatiom you need… ---
**Author:** ![puschie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/puschie/32/8422_2.png) [@puschie](https://community.homey.app/u/puschie)\ **Post date:** [October 24, 2026, 1:56pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/176 "2026-10-24T13:56:30Z")
Hi, just prepared version 0.12.1 that replaces deprecated dependencies with own implementations and active projects. > **[Fritzbox Bridge | Homey](https://homey.app/en-us/app/com.puschie.fritzbox-bridge/Fritzbox-Bridge/test/)** > > Use your FRITZ!Box as a bridge and access all device sensors Would be great to get some feedback about stability and functionality - should be identical or better ---
**Author:** ![puschie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/puschie/32/8422_2.png) [@puschie](https://community.homey.app/u/puschie)\ **Post date:** [October 24, 2026, 2:00pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/177 "2026-10-24T14:00:04Z")
Sorry for late response - common fritzbox features should be available automatically. If not, please open a ticket in github with the exact missing feature (and a diagnostic report id if possible) ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [October 24, 2026, 4:00pm UTC](https://community.homey.app/t/app-pro-fritzbox-bridge/11334/178 "2026-10-24T16:00:25Z")
Hi @puschie, Thanks for the reply. I am not missing features, but devices. Would like to ask if it is possible to have my 1220E/1260E PowerLine devices supported s well…? [Previous page](https://community.homey.app/t/app-pro-fritzbox-bridge/11334.md?page=8)