# \[App\]\[Pro\] Flair Vents - Control your Flair smart vents, pucks, and rooms - Looking for Beta Testers! **URL:** \ **Category:** Apps\ **Tags:** app, devices, homey-pro, advancedflow\ **Created:** [March 21, 2026, 2:57am UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752 "2026-03-21T02:57:43Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Martin\_Martinez](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@Martin\_Martinez](https://community.homey.app/u/Martin_Martinez)\ **Post date:** [March 21, 2026, 2:57am UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752/1 "2026-03-21T02:57:43Z")
Control your Flair smart vents, pucks, and rooms from your Homey Pro. App link: [Flair | Homey](https://homey.app/en-us/app/com.flair/Flair/test/) How It Works This app connects your Homey Pro to your Flair system through the Flair cloud API. When you adjust a vent or set a room temperature in Homey, the command is sent over the internet to Flair’s servers, which then relay it to your Flair Puck or Bridge at home. The Puck or Bridge communicates directly with your vents over radio to carry out the command. Because the app relies on the Flair cloud, an active internet connection is required for Homey to control your vents. If your internet goes down, your Flair system will continue to work on its own — you just won’t be able to control it from Homey until the connection is restored. What You Need - Flair Smart Vents — The motorized register vents that replace your standard floor or ceiling vents - Flair Puck or Bridge — Acts as the local hub in your home, communicating with your vents over radio - Flair Account — Required to connect the app to your Flair system - Flair API Credentials — A Client ID and Client Secret, which you can obtain by contacting Flair support or visiting [flair.co](http://flair.co) - Homey Pro — Running firmware 5.0.0 or higher Supported Devices - Flair Vent — Control vent position, view duct temperature and battery level - Flair Puck — Monitor temperature, humidity, light level, and pressure - Flair Room — Set target temperature, monitor current temperature and humidity Flow Support - Trigger: Vent position changed - Condition: Vent is open/closed - Action: Set vent position Setup 1. Install the app on your Homey Pro 2. Add a device and enter your Flair API credentials (Client ID and Client Secret) 3. Select the devices you want to add The app will automatically sync with your Flair system every 30 seconds to keep device states up to date. ---
**Author:** ![discourse\_ai\_spam](https://avatars.discourse-cdn.com/v4/letter/d/c68b51/32.png) [@discourse\_ai\_spam](https://community.homey.app/u/discourse_ai_spam)\ **Post date:** [March 21, 2026, 2:57am UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752/2 "2026-03-21T02:57:47Z")
Unlisted on March 21, 2026, 2:57am UTC ---
**Author:** ![system](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/system/32/1_2.png) [@system](https://community.homey.app/u/system)\ **Post date:** [March 21, 2026, 4:10am UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752/3 "2026-03-21T04:10:25Z")
Listed on March 21, 2026, 4:10am UTC ---
**Author:** ![Soren\_Lancaster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/soren_lancaster/32/167475_2.png) [@Soren\_Lancaster](https://community.homey.app/u/Soren_Lancaster)\ **Post date:** [June 18, 2026, 9:07pm UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752/4 "2026-06-18T21:07:05Z")
Hi there, I am looking at using Flair Puck 2s to control a couple of mini split systems in our home. Was looking to test out your Flair app, but the way I’m reading things on the app page, it only reads the information from the pucks, and app temperature control is only done through the Flair Smart Vents. Does the app allow the use of the pucks as a stand alone mini split control? ---
**Author:** ![Martin\_Martinez](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@Martin\_Martinez](https://community.homey.app/u/Martin_Martinez)\ **Post date:** [June 19, 2026, 12:20am UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752/5 "2026-06-19T00:20:18Z")
Hey @Soren_Lancaster ! Right now what the app does is access all the information of the pucks and vents. Also you can open or close the vents using homey. I will try to update the app so you can treat the pucks as thermostats. (Is that what you mean?) ---
**Author:** ![Soren\_Lancaster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/soren_lancaster/32/167475_2.png) [@Soren\_Lancaster](https://community.homey.app/u/Soren_Lancaster)\ **Post date:** [June 19, 2026, 12:33am UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752/6 "2026-06-19T00:33:03Z")
Hi @Martin_Martinez ! Thanks for the quick reply. Essentially the Puck 2 can serve as an infrared remote control for my mini split instead of the remote that comes with them. The ability to have Homey tell temperature from the Puck as well as turn on cooling or heating to a set temperature is what I was wondering about. It would be to integrate temperature control through Homey using the Puck devices. Hope I’m making sense in what I’m asking? ---
**Author:** ![Martin\_Martinez](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@Martin\_Martinez](https://community.homey.app/u/Martin_Martinez)\ **Post date:** [July 8, 2026, 3:25pm UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752/7 "2026-07-08T15:25:02Z")
I did some updates but I am not able to test it cuz i dont have the puck v2. You can test it and let me know if it works! @Soren_Lancaster ---
**Author:** ![Soren\_Lancaster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/soren_lancaster/32/167475_2.png) [@Soren\_Lancaster](https://community.homey.app/u/Soren_Lancaster)\ **Post date:** [October 21, 2026, 2:34am UTC](https://community.homey.app/t/app-pro-flair-vents-control-your-flair-smart-vents-pucks-and-rooms-looking-for-beta-testers/152752/8 "2026-10-21T02:34:42Z")
Hi @Martin_Martinez, Just a heads up, we were finally able to get a couple Flair Pucks up and running. We were able to add them in to Homey as mini splits through the Flair app you created. It can read temperature; however, we are unable to execute any commands if the system is set to “auto” in the Flair app. Not sure if this is a Flair issue or if it’s something that can be adjusted through the Homey app. We can turn the systems to “manual” mode it appears in the Homey app as if it turns things on, but we can’t control temperature, speed or anything else. It gives various error messages such as: Flair API error 422: {“errors”: [{“title”: “ValidationError”, “status”: “422”, “detail”: “Cannot set power when in Auto mode”}]} or Flair API error 422: {“errors”: [{“title”: “ValidationError”, “status”: “422”, “detail”: “Temperature, 24, is not allowed in codeset constraints.”}]} Hope this helps!