# \[APP\]\[Pro\] Eufy Security **URL:** \ **Category:** Apps\ **Tags:** app, official, security, camera, homey-pro\ **Created:** [March 19, 2021, 3:28pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921 "2021-03-19T15:28:48Z")\ **Posts on this page:** 20\ **Page:** 68
**Author:** ![Jeroen\_W](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_w/32/9803_2.png) [@Jeroen\_W](https://community.homey.app/u/Jeroen_W)\ **Post date:** [August 18, 2021, 5:37pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1350 "2021-08-18T17:37:53Z")
Hi, I was wondering if someone could confirm if the Indoor Cam Pan & Tilt support crying detection and does it work with the app (I see it as a card)? ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 18, 2021, 7:29pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1351 "2021-08-18T19:29:46Z")
Hey @Jeroen_W Yes it does. And it’s quite accurate actually. Also works with the app 👍 ---
**Author:** ![CyberSponk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cybersponk/32/8334_2.png) [@CyberSponk](https://community.homey.app/u/CyberSponk)\ **Post date:** [August 19, 2021, 4:30am UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1352 "2021-08-19T04:30:10Z")
good morning, running eufy-app in version 2.11.6 and before this version all works fine. have two flows for turning eufy-cams on and two flows for turning cams off. inside each flow are four eufy-cams. since 2.11.6 not all cam‘s switched on or off when flow is running. is there a limitation for commands from homey to eufy in a certain periode? tryed it with a delay between the two flows but always the same result. is there an easier way two switch on/off all cams? ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 19, 2021, 6:28am UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1353 "2021-08-19T06:28:44Z")
Hey @CyberSponk , There was a limitation. But that was removed in update 2.11.1 ([[APP][Pro] Eufy Security - #1278 by martijnpoppen](https://community.homey.app/t/app-eufy-security/44921/1278)). Before that it was not possible to have 4 cameras in 1 flow without delays. So in my theory it should work. Would be nice if you can send a diagnostic report. Then i’ll check if i see something which is not working. Diagnostic report you can do via: > More - Apps - Eufy Security - Settings wheel right top - send diagnostic report ---
**Author:** ![Jeroen\_W](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_w/32/9803_2.png) [@Jeroen\_W](https://community.homey.app/u/Jeroen_W)\ **Post date:** [August 19, 2021, 6:30am UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1354 "2021-08-19T06:30:06Z")
Thank you 🙂 happy to read it’s working well. I will buy one for the soon to be baby room 👶 ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 19, 2021, 6:53pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1355 "2021-08-19T18:53:08Z")
## New app update (test: [2.11.9](https://homey.app/nl-nl/app/com.eufylife.security/Eufy-Security/test)): * * * **Changes:** > - FIX: Flowcards for multiple device with single Hub at the same time > - FIX: Flowcards for multiple standalone devices at the same time. > - FIX: refresh P2P service when expired. fixes unresponsive devices * * * So in release **2.11.1** I fixed the following bugs: > - [BUG] multiple flowcards at once are not working without delay > - [BUG] triggering multiple cameras with different Hubs at the same time doesn’t work without delay But with that release introduced this one: > - [BUG] triggering multiple cameras with same Hub doesn’t work anymore * * * @CyberSponk Can you test if your flow works again? So all 4 camera’s at the same time. @Chris_nl Can you maybe also test as you have multiple stand-alone devices? I already tested with 1 Homebase device and 1 Standalone device and that still works. Also multiple cards at the same time is not an issue. ---
**Author:** ![Chris\_nl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/chris_nl/32/27194_2.png) [@Chris\_nl](https://community.homey.app/u/Chris_nl)\ **Post date:** [August 19, 2021, 7:11pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1356 "2021-08-19T19:11:33Z")
Sure, just sent you a message, will test some things tonight ---
**Author:** ![CyberSponk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cybersponk/32/8334_2.png) [@CyberSponk](https://community.homey.app/u/CyberSponk)\ **Post date:** [August 20, 2021, 7:11am UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1357 "2021-08-20T07:11:13Z")
> [@martijnpoppen](#): > > Can you test if your flow works again? So all 4 camera’s at the same time. Yes, ist works again. :-). Tested it with 3, 4 and 5 cam‘s in one Flow without delays. Thanks. ---
**Author:** ![mattrix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mattrix/32/17475_2.png) [@mattrix](https://community.homey.app/u/mattrix)\ **Post date:** [August 20, 2021, 8:19am UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1358 "2021-08-20T08:19:53Z")
Hi All Eufy’s homeys, Homey is really not accurate for geofencing so i would like to use Eufys geofencing app. So i created a flow for testing purpose : WHEN this flow has started AND eufy arm mode is home THEN set my homey presence home ![Screenshot_2021-08-19-18-48-41-775_app.homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/5/55c4485781bb12e3b47b8cd0aa58a70b353ac0d1.jpeg) Unfortunately that is not working, i get an error Any idea how i could get homey to check eufy s mode or tell eufy to start a homey flow… Thank you nb1 : It seems i am missing this card on my Eufy Indoor Cam ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/7/e7e5d17c169b1fe5d8ad89fcaf8a619606d541fe.jpeg) That card is about if eufy mode has changed Nb2: i dont have homebase just eufy app ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 20, 2021, 8:38am UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1359 "2021-08-20T08:38:51Z")
Hey @mattrix , Just read your message. Geofencing with a stand alone camera is not going the work. Only the Homebase reports it’s security mode. Once I get 2FA working it should be possible as user don’t get locked out anymore. I’m working on that part and hopefully i can push that in the coming month. After that i’ll make fixes for 2-way communication. ---
**Author:** ![Marco](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@Marco](https://community.homey.app/u/Marco)\ **Post date:** [August 22, 2021, 9:16pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1360 "2021-08-22T21:16:43Z")
Hi Martijn, Thank you for your amazing app. I’ve ran into a problem. I would like to create a flow which would send me a picture when the doorbell is pressed. I’ve got it working on the Android phone of the wife but my iPhone doesn’t get any notification. All is triggered within the same flow with the “doorbell tag” attached to the “push notification” option from homey. Other messages within the same “push notification” option do trigger on my device. Thanks! Marco ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 22, 2021, 10:03pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1361 "2021-08-22T22:03:25Z")
Hey @Marco , When you don’t get an notification the image is not correct. Can you try to add a notification to that flow without an image and check if that comes trough? ---
**Author:** ![riiskongen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/riiskongen/32/34733_2.png) [@riiskongen](https://community.homey.app/u/riiskongen)\ **Post date:** [August 24, 2021, 2:34pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1362 "2021-08-24T14:34:37Z")
Hi and thanks for a great app. From reading through this forum I understand that it is not possible to get a snapshot from a camera at a spesific time. Is my understanding correct or is there a workaround? What I would like is to take a snapshot from one camera at a spesific time i.e. 08:00 and send it with e-mail (i.e. email sender) and telegram (i.e. CallMebot). ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 24, 2021, 2:46pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1363 "2021-08-24T14:46:01Z")
Hey @riiskongen, Thanks! 😃 Yes that’s correct. That’s not possible at the moment. I’m still looking for other ways to do this but no succes yet. ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 24, 2021, 4:10pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1364 "2021-08-24T16:10:23Z")
## New app update (live: [2.11.9](https://homey.app/nl-nl/app/com.eufylife.security/Eufy-Security)): * * * **Changes:** > - FIX: Flowcards for multiple device with single Hub at the same time > - FIX: Flowcards for multiple standalone devices at the same time. > - FIX: refresh P2P service when expired. fixes unresponsive devices Extra info can be found here: [[APP][Pro] Eufy Security - #1355 by martijnpoppen](https://community.homey.app/t/app-eufy-security/44921/1355) CC: @CyberSponk @Chris_nl you can install the live version again if you want 🙂 * * * Fun fact: this is build 200. So that means that there are already have been 200 versions of the app (test/live) 😃 ---
**Author:** ![Chris\_nl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/chris_nl/32/27194_2.png) [@Chris\_nl](https://community.homey.app/u/Chris_nl)\ **Post date:** [August 24, 2021, 5:10pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1365 "2021-08-24T17:10:05Z")
Congrats on 200 updates, next goal 300? 😉 ---
**Author:** ![RobSanders](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robsanders/32/33968_2.png) [@RobSanders](https://community.homey.app/u/RobSanders)\ **Post date:** [August 24, 2021, 5:12pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1366 "2021-08-24T17:12:37Z")
Hoi Martijn, Inmiddels is het support ticket opgelost en is mijn Homey weer terug. Ik probeer de eufy app te installeren. Ik heb een extra account zonder 2 factor authenticatie aangemaakt. Ook het locale ip nummer heb ik ingevuld. Ik krijg nu de melding Error eufyp2p.init is not a function. Weer jij hoe dit op te lossen? Groeten, Rob ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 24, 2021, 5:29pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1367 "2021-08-24T17:29:38Z")
Hi @RobSanders Nice that your homey is fixed I’ll have a look at it 🙂 Its from a recent change ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 24, 2021, 5:29pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1368 "2021-08-24T17:29:58Z")
> [@Chris\_nl](#): > > Congrats on 200 updates, next goal 300? Thanks! Hehe sure 😃 ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [August 24, 2021, 5:44pm UTC](https://community.homey.app/t/app-pro-eufy-security/44921/1369 "2021-08-24T17:44:59Z")
@RobSanders can you send a diagnostic report ? > Meer - apps - Eufy Security - tandwiel rechtsbovenin - stuur diagnostisch rapport [Previous page](https://community.homey.app/t/app-pro-eufy-security/44921.md?page=67) [Next page](https://community.homey.app/t/app-pro-eufy-security/44921.md?page=69)