# \[APP\]\[PRO\] Eplucon Ecoforest warmtepomp **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [December 20, 2025, 7:45pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455 "2025-12-20T19:45:25Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [December 20, 2025, 7:45pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/1 "2025-12-20T19:45:25Z")
# Eplucon Heat Pump for Homey Monitor your Eplucon Ecoforest Heat Pump directly from your Homey smart home hub. ## Features - Real-time temperature monitoring (indoor, outdoor, hot water, brine, heating) - CV pressure monitoring - Monthly energy statistics (consumed, heat delivered, cooling delivered) - Automatic polling every 60 seconds - Flow card support for automations ## Supported Devices - Eplucon Ecoforest Heat Pumps (via Eplucon Portal) ## Capabilities | Capability | Description | Unit | | --- | --- | --- | | Indoor Temperature | Room temperature | °C | | Outdoor Temperature | Outside temperature | °C | | Hot Water Temperature | Domestic hot water | °C | | Brine In/Out | Ground loop temperatures | °C | | Heating In/Out | Heating circuit temperatures | °C | | CV Pressure | Central heating pressure | bar | | Monthly Consumed | Previous month energy used | kWh | | Monthly Heat | Previous month heat delivered | kWh | | Monthly Cooling | Previous month cooling delivered | kWh | ## Flow Cards ### Conditions - Temperature thresholds for all sensors - Pressure level checks ### Triggers - Temperature changes - Pressure changes ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [December 22, 2025, 7:52pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/2 "2025-12-22T19:52:58Z")
> **[Eplucon Heat Pump | Homey](https://homey.app/en-us/app/nl.eplucon.homey/Eplucon-Heat-Pump/test/)** > > Monitor your Eplucon Ecoforest Heat Pump temperatures, pressure, and energy statistics ---
**Author:** ![Kenny\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_s/32/80323_2.png) [@Kenny\_S](https://community.homey.app/u/Kenny_S)\ **Post date:** [December 23, 2025, 11:06am UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/3 "2025-12-23T11:06:19Z")
Hi Wout, App works perfect so far. Same readouts/values as I have via the HomeAssistant integration in Homey. It would be good if you can have the same readouts as here (there are 47 values): [Releases · koenhendriks/ha-eplucon · GitHub](https://github.com/koenhendriks/ha-eplucon/releases) Especially the “Active WW request (on/off)” and “Direct Outlet DG1 (on/off)” can be helpful since these indicate if Hot Water production is active or DG1 is active. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/7/e73eb42cc47f2afc5820ca04de0746602b99d0c6.jpeg) These values are switches around, if this is correct my floor is heating the water and it should be the other way around 🙃 . I think this is the correct way of showing when Cooling the floor because the heat pump is working the other way around in that case. My heat pump is in idle, so I will double check this when the DG1 is active. Being able to write values would be super useful, doing this via HomeAssistant works, but using 2 ecosystems is not what I want. Would be also good if you can choose what Capability is shown, the Consumed power i.e.g. is not interesting as I have my own power meter monitoring this (I saw your post about this on GitHub), btw I’m “kenny-s240” on Github 🙂. ---
**Author:** ![Kenny\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_s/32/80323_2.png) [@Kenny\_S](https://community.homey.app/u/Kenny_S)\ **Post date:** [December 23, 2025, 8:30pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/5 "2025-12-23T20:30:35Z")
My statement about the temperature showing the Wong way around is not correct. It’s from the heat pump perspective, so outgoing water is ‘hot’ and incoming water is ‘cold’. ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [December 23, 2025, 8:42pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/6 "2025-12-23T20:42:18Z")
Thanks Kenny, working in an upgrade, thanks for valuable feedback! ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [December 23, 2025, 10:43pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/7 "2025-12-23T22:43:27Z")
@Kenny_S what installed meter do you have and how do you read the values of that meter? I have this one, but not yet able to read the data [[APP][Pro] Eastron - Advanced Energy Monitoring with DIN Rail Meters over Modbus TCP - #7 by Wout\_van\_den\_Dool](https://community.homey.app/t/app-pro-eastron-advanced-energy-monitoring-with-din-rail-meters-over-modbus-tcp/147339/7)… Also wondering if it is on a separate fase implemented… And have hopes I can read per fase via Homey P1 powermeter… ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [December 23, 2025, 11:37pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/8 "2025-12-23T23:37:33Z")
**Release Notes for v1.2.1:** **Full Sensor Parity with [Home Assistant Integration](https://github.com/koenhendriks/ha-eplucon)** This release adds 26 new sensors, bringing the total to 49 capabilities - matching (and slightly exceeding) the Home Assistant Eplucon integration by Koen Hendriks. **New Features:** - **Status & Mode Monitoring:** Operation Mode, Heating Mode, Heating State, Heating Pump State, Alarm Active - **Hot Water Controls:** Active WW Request (on/off), WW Temperature Configured, Warm Water Active, Domestic Hot Water, Heatloading Active/Heating - **Energy Monitoring:** Energy Delivered, Energy Usage, Import/Export Energy, Total Active Power, SPF (Seasonal Performance Factor) - **Refrigerant Diagnostics:** Suction Gas Pressure & Temperature, Expansion Valve Position - **Pump & Counter Data:** Production Circulation Pump, Number of Starts - **Smart Grid Signals:** DG1 (Direct Outlet), SG2, SG3, SG4 **Improvements:** - Type-safe capability value handling - Better handling of unavailable sensors - Improved reliability of data updates ---
**Author:** ![Kenny\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_s/32/80323_2.png) [@Kenny\_S](https://community.homey.app/u/Kenny_S)\ **Post date:** [December 24, 2025, 6:11pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/9 "2025-12-24T18:11:43Z")
I have the 3ph pm from Homewizard installed, readout is through the Homewizard app on Homey. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/5/f5d13a57b5c834683961e4d87e9e30331d61d052.jpeg) I also have the 3ph pm installed you have installed. This is shown in the Eplucon app and can be used as you do to trigger the Pump, but I’m not using this. These are the house values and not the pump values, kind of a P1 meter. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/e/fe5b8ad7eda6b872c8b8107da8e1b370c762416a.jpeg) ---
**Author:** ![Kenny\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_s/32/80323_2.png) [@Kenny\_S](https://community.homey.app/u/Kenny_S)\ **Post date:** [December 24, 2025, 6:13pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/10 "2025-12-24T18:13:34Z")
Maybe stupid question, but I updated the application on Homey but still seeing the capabilities from the first version. do I need to remove and ad the Heat Pump again for the updated capabilities to show? ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [December 24, 2025, 6:37pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/11 "2025-12-24T18:37:43Z")
Yes you need to remove and re-install… Had the same ---
**Author:** ![Kenny\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_s/32/80323_2.png) [@Kenny\_S](https://community.homey.app/u/Kenny_S)\ **Post date:** [December 24, 2025, 9:18pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/12 "2025-12-24T21:18:21Z")
Adding the HP is not possible for some reason. Tried reinstalling the app, but no change… ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/6/667e1de7bef7bff576cc1b612dafee2138744429.jpeg) ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [December 25, 2025, 7:43am UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/13 "2025-12-25T07:43:00Z")
Will fix this after Christmas…🎄 ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [December 25, 2025, 8:04pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/14 "2025-12-25T20:04:13Z")
> [@Kenny\_S](#): > > Adding the HP is not possible for some reason. Tried reinstalling the app, but no change… > **[Eplucon Heat Pump | Homey](https://homey.app/en-nl/app/nl.eplucon.heatpump/Eplucon-Heat-Pump/test/)** > > Monitor your Eplucon Ecoforest Heat Pump temperatures, pressure, and energy statistics “Version 1.3.0 is now available as a new app (nl.eplucon.heatpump). Due to App Store requirements, the app ID had to change. Please uninstall the old version and install the new ‘Eplucon Heat Pump’ app, then re-add your heat pump.” ---
**Author:** ![Kenny\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_s/32/80323_2.png) [@Kenny\_S](https://community.homey.app/u/Kenny_S)\ **Post date:** [December 25, 2025, 9:15pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/15 "2025-12-25T21:15:43Z")
Works great again! I noticed the fan speed is in RPM, for some strange reason this is called a speed in the th-touch but it’s actually a percentage value. Depending on the brand of the outdoor unit the speed is about 600-700 rpm at 100%. ![IMG_8312](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/e/0edf19ef9a9be3791b680b2119be143c47725b45.jpeg) The overheating value should be in ‘C and not K ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/1/5142602b31d6df192f879dd52b3a46222604a2e8.jpeg) ---
**Author:** ![flowerpiece](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/flowerpiece/32/12477_2.png) [@flowerpiece](https://community.homey.app/u/flowerpiece)\ **Post date:** [January 4, 2026, 8:44pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/16 "2026-01-04T20:44:51Z")
Awesome that you made this app 😃 . It works great for me! So glad to finally have my ecoforest in my homey. It seems though sometimes some values are updated after 2 hours, 1 hour, 3 hours (random it seems) instead of every minute. Is that what it’s supposed to do? ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [January 4, 2026, 9:03pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/17 "2026-01-04T21:03:04Z")
If there is no updated value, then you see the latest moment that value has been updated… ---
**Author:** ![flowerpiece](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/flowerpiece/32/12477_2.png) [@flowerpiece](https://community.homey.app/u/flowerpiece)\ **Post date:** [January 4, 2026, 9:54pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/18 "2026-01-04T21:54:29Z")
Ah allright, so it means the value has not changed since then? It only updates the value when it changes? Got it thanks 🙂 . It also sometimes updates the value to zero, I have that with all the variables. Any idea what that might be? ![IMG_8515.PNG](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/e/ae35fc5f4b6bec78ea2734b70b686f097ded266f.jpeg) ---
**Author:** ![Wout\_van\_den\_Dool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout_van_den_dool/32/391_2.png) [@Wout\_van\_den\_Dool](https://community.homey.app/u/Wout_van_den_Dool)\ **Post date:** [January 6, 2026, 4:52pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/19 "2026-01-06T16:52:03Z")
New version available for test: [Eplucon Heat Pump | Homey](https://homey.app/en-nl/app/nl.eplucon.heatpump/Eplucon-Heat-Pump/test/) **Version 1.3.2:** 1. **Flow Card Triggers** - Added triggers for DG1 heating and hot water status changes that fire when the state transitions on/off 2. **Capability Fixes:** - Renamed `vent_rpm` to `vent_speed` with % unit (community feedback) - Changed `overheating` unit from K to °C (community feedback) 1. **Updated Images & README** - Simplified README for App Store, new lifestyle image CC @Kenny_S thanks for testing! ---
**Author:** ![Kenny\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_s/32/80323_2.png) [@Kenny\_S](https://community.homey.app/u/Kenny_S)\ **Post date:** [January 6, 2026, 6:32pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/20 "2026-01-06T18:32:14Z")
Thanks for the update, the 2 new if triggers work perfect. I noticed a strange value, “ total active power”: It seems to have some kind of relationship with the energy usage because the peaks are kind of in the same spots as the power meter… but the value is in the range of 0,3 to about 6W. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/0/f006e891c900cc01de943cc43168a99029c052e8.jpeg) This is by the way exactly the same as in the HomeAssistant integration, but nevertheless, strange what this value means. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/2/f2090b39eb3859959255bb9018f1a90cb080c970.jpeg) I made an advanced virtual device with the [Device Capabilities](https://homey.app/en-nl/app/nl.qluster-it.DeviceCapabilities/Device-Capabilities/) app where I use the operating mode to show me what state of the HP is: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/f/dfff7967ec325e863f91cccc2ef3dd5e928aba3c.jpeg) This gives me, with a nice custom icon, the following: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/a/7af837157706fa3c030a9fcb1df4747df7e62044.png) Where 0=off, 1=cooling and 2=heating But, somehow the value should already be available as a readout like in HomeAssistant and workarounds are not needed then: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/e/2e203b400568f93dc048bc382caae296d748173c.png) ---
**Author:** ![Kenny\_S](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kenny_s/32/80323_2.png) [@Kenny\_S](https://community.homey.app/u/Kenny_S)\ **Post date:** [January 7, 2026, 10:02pm UTC](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455/21 "2026-01-07T22:02:12Z")
The disadvantage of not working locally, Eplucon down, Homey app down… ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/4/046c1f927f9d973699162601806ad913f0f72f12.jpeg) [Next page](https://community.homey.app/t/app-pro-eplucon-ecoforest-warmtepomp/147455.md?page=2)