# \[APP\]\[Pro\] Enphase Controller

**URL:** <https://community.homey.app/t/app-pro-enphase-controller/155720>\
**Category:** Apps\
**Tags:** app, homey-pro\
**Created:** [June 3, 2026, 6:59pm UTC](https://community.homey.app/t/app-pro-enphase-controller/155720 "2026-06-03T18:59:31Z")\
**Posts on this page:** 1\
**Showing post:** 35

<div class="post-metadata">

**Author:** ![bramtops](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bramtops/32/166144_2.png) [@bramtops](https://community.homey.app/u/bramtops)\
**Post date:** [June 9, 2026, 7:34am UTC](https://community.homey.app/t/app-pro-enphase-controller/155720/35 "2026-06-09T07:34:49Z")

</div>

> [@Amersfoort](#):
>
> In the Android Enlighten app, when I click on an inverter, I can see the inverter’s serial number, but no sequence number. How can I relate the sequence number in the Enphase Controller app to the physical inverter on the roof? A serial number instead of a sequence number in the Enphase Controller app would help.

The serial number is rather large and would mess up the UI - and they’re not really relevant unless there’s a problem. There’s 2 easy ways to get the connection between the 2 though:

- Any alert triggered wil give both the inverter serial as wel as the index number.
- The inverters are also sorted by serial number before assigning the index number. So if you sort the inverters by serial number (you can in a browser in the Maintainer view), they will align with the order used in Enphase Controller.

> [@Amersfoort](#):
>
> As a system owner, I see all the data (that is correct). My gateway is metered without CT coils. In the app, this is indicated as “Metered Gateway: No”. It is a metered gateway, but it cannot measure. I don’t know if this nuance is important.

Yep, thats intentional. A “metered gateway without the coils” is functionally equivalent to a “Standard Gateway”: it will accept on/off commands, but PEL commands are ignored and measurements are delayed.

I’ll do a UI polishing round in an upcoming version.  
Thanks for chiming in!

---

_[View the full topic](https://community.homey.app/t/app-pro-enphase-controller/155720)._