# \[APP\]\[Pro\] EasyLighting - Make smart home easy **URL:** \ **Category:** Apps\ **Tags:** app, z-wave, zigbee\ **Created:** [July 6, 2022, 2:39am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588 "2022-07-06T02:39:51Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![Fac3](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fac3/32/4550_2.png) [@Fac3](https://community.homey.app/u/Fac3)\ **Post date:** [August 8, 2023, 11:43am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/63 "2023-08-08T11:43:54Z")
Dear @Easy_Home ! There is a missing flow card for SR-ZG9080A. This module can be added as venetian blind controller, and if I add it this way, tilt position appears in the user interface beside the open position. So what I need indeed is a “Set Tilt Position (%)” flow card for these modules. Thanks for your support! Rgds, Gergely ---
**Author:** ![Magnus\_Ehrman](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/magnus_ehrman/32/80256_2.png) [@Magnus\_Ehrman](https://community.homey.app/u/Magnus_Ehrman)\ **Post date:** [August 13, 2023, 9:08am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/64 "2023-08-13T09:08:08Z")
Unable to insert the device into Homey Pro 2023 with the correct installation model in the app. It never starts the Zigbee pairing. Model SR-ZG9101SAC-HP-SWITCH-2CH. ---
**Author:** ![Andre\_Fiskum](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andre_fiskum/32/80475_2.png) [@Andre\_Fiskum](https://community.homey.app/u/Andre_Fiskum)\ **Post date:** [September 1, 2023, 11:34pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/65 "2023-09-01T23:34:48Z")
Yes, please do. I want to use this to control en elko dali dimmer, together with elko smart control panel (zigbee) > **[4 in 1 Zigbee to DALI Controller SR-2411-ZG](https://www.sunricher.com/4-in-1-zigbee-to-dali-controller-sr-2411-zg.html)** > > SR-2411-ZG is a 4 in 1 DALI controller that receives zigbee signal and can be controlled through zigbee gateway or hub interface. The zigbee to DALI controller converts the wireless signal to DALI. ---
**Author:** ![Jon\_Eric\_Westerlund](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jon_eric_westerlund/32/80488_2.png) [@Jon\_Eric\_Westerlund](https://community.homey.app/u/Jon_Eric_Westerlund)\ **Post date:** [September 3, 2023, 9:50am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/66 "2023-09-03T09:50:02Z")
Hi Wang, I see from previous posts that you’ve been able to add new devices to this app. Can you also add the touch panel controllers? Im using " ZV9001T4-DIM". Regards, Jon Eric ---
**Author:** ![Andy\_Hayes](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andy_hayes/32/80642_2.png) [@Andy\_Hayes](https://community.homey.app/u/Andy_Hayes)\ **Post date:** [September 21, 2023, 9:57pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/67 "2023-09-21T21:57:22Z")
1 ---
**Author:** ![Andy\_Hayes](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andy_hayes/32/80642_2.png) [@Andy\_Hayes](https://community.homey.app/u/Andy_Hayes)\ **Post date:** [September 21, 2023, 9:59pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/68 "2023-09-21T21:59:59Z")
Hi Wang. I am implementing a couple of large scale zwave projects for my clients in the Caribbean and this will be my first time setting up the systems with Homey pro Hubs. I have had a direct account relationship with Sunricher for 7 years. Always using their products in my projects. I regularly use the SR-ZV9001T3- DIM-US and SR-ZV9001T4-DIM-EU. I don´t see either of these listed in the app. Is there any chance that you could add support for these . models. It is critical for implementation in the projects as already discussed with SR. Many thanks in advance. Andy ---
**Author:** ![A.Hallberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/a.hallberg/32/177969_2.png) [@A.Hallberg](https://community.homey.app/u/A.Hallberg)\ **Post date:** [October 4, 2023, 11:31pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/69 "2023-10-04T23:31:42Z")
Hello @Easy_Home, This looks great, are you able to share the source code under the GNU3 licens agreement :)? can’t seem to find the source code anywhere 🙂 kind regards ---
**Author:** ![Easy\_Home](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/easy_home/32/46299_2.png) [@Easy\_Home](https://community.homey.app/u/Easy_Home)\ **Post date:** [October 6, 2023, 1:56am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/70 "2023-10-06T01:56:20Z")
Hi, the owner has already changed the project public, please visit this link: > **[GitHub - easyhomesrc/homey\_easylighting: EasyLighting Homey App](https://github.com/easyhomesrc/homey_easylighting)** > > EasyLighting Homey App. Contribute to easyhomesrc/homey\_easylighting development by creating an account on GitHub. ---
**Author:** ![A.Hallberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/a.hallberg/32/177969_2.png) [@A.Hallberg](https://community.homey.app/u/A.Hallberg)\ **Post date:** [October 6, 2023, 9:55am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/71 "2023-10-06T09:55:59Z")
Hello, Thanks for sharing the link, very much appreciated and welcome back 🙂 ---
**Author:** ![A.Hallberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/a.hallberg/32/177969_2.png) [@A.Hallberg](https://community.homey.app/u/A.Hallberg)\ **Post date:** [October 6, 2023, 1:39pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/72 "2023-10-06T13:39:43Z")
@Easy_Home, Is it possible to get you to update the 2CH relay ( ZG9101SAC\_HP\_Switch\_2CH) flowcards? it seems that i dont have the skills myself ☹ Right now its only on/off, so you cant control the 2 channels in flows, only the entire device at once. so the 2 channels are useless. ---
**Author:** ![Jeremie\_Gauch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeremie_gauch/32/79831_2.png) [@Jeremie\_Gauch](https://community.homey.app/u/Jeremie_Gauch)\ **Post date:** [October 10, 2023, 7:00am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/73 "2023-10-10T07:00:21Z")
Hi, How to use the sunricher zg9001t4 ? Thank you for your job ! ---
**Author:** ![Wolfram\_Kluger](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wolfram_kluger/32/79291_2.png) [@Wolfram\_Kluger](https://community.homey.app/u/Wolfram_Kluger)\ **Post date:** [October 10, 2023, 10:21pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/74 "2023-10-10T22:21:22Z")
High Easy Lighting, thanks for the Great App. Do you Thank it is possible to separate the two Channels of the zg on off 2 ch Switch. This would make it possible to create seperate flows which would be great. Thanks for you Support. Wolfram ---
**Author:** ![OkosOtthon\_Labor](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/okosotthon_labor/32/90631_2.png) [@OkosOtthon\_Labor](https://community.homey.app/u/OkosOtthon_Labor)\ **Post date:** [November 1, 2023, 12:29pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/75 "2023-11-01T12:29:22Z")
Hi Wang, Is there any update on the way for this great app? Rgds, ---
**Author:** ![Wolfram\_Kluger](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wolfram_kluger/32/79291_2.png) [@Wolfram\_Kluger](https://community.homey.app/u/Wolfram_Kluger)\ **Post date:** [November 2, 2023, 8:42pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/76 "2023-11-02T20:42:19Z")
Hi Wang, thanks for the great app. I am using lots of ZG OnOff(2CH) switches in my house. To create flows it would be necessary to seperate the two chanels. It is possible via Hue, but I want to get rid of my Hue. Do you think there is a possibility to do this in easy lighting? Thanks from Austria ---
**Author:** ![Andre\_Fiskum](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andre_fiskum/32/80475_2.png) [@Andre\_Fiskum](https://community.homey.app/u/Andre_Fiskum)\ **Post date:** [November 3, 2023, 9:37pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/77 "2023-11-03T21:37:44Z")
Hi. Any chance this device will be added to the app? [4 in 1 Zigbee to DALI Controller SR-2411-ZG](https://www.sunricher.com/4-in-1-zigbee-to-dali-controller-sr-2411-zg.html) ---
**Author:** ![peking](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peking/32/78912_2.png) [@peking](https://community.homey.app/u/peking)\ **Post date:** [November 6, 2023, 5:44pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/78 "2023-11-06T17:44:48Z")
Hi, Since upgrading to 1.0.28, my ZG9100A-S stopped working. Would like to revert from experimental software, but I don’t know how to do this without loosing all of my devices and flows. Error message: Device Unavailable Expected attribute names array, as of zigbee-clusters@2.0.0 call readAttributes([‘myAttr’]) ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [November 7, 2023, 8:49am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/79 "2023-11-07T08:49:42Z")
Afaik, just install the official version from the Web App Store, not within the Homey Smartphone App. > **[EasyLighting](https://homey.app/en-us/app/com.easyhome.easylighting/EasyLighting/)** > > Make smart home easy. ---
**Author:** ![peking](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peking/32/78912_2.png) [@peking](https://community.homey.app/u/peking)\ **Post date:** [November 7, 2023, 2:58pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/80 "2023-11-07T14:58:56Z")
Thanks, I managed to downgrade to 1.0.26, which solved the problem. ---
**Author:** ![JKPe](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jkpe/32/71173_2.png) [@JKPe](https://community.homey.app/u/JKPe)\ **Post date:** [November 8, 2023, 3:48pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/81 "2023-11-08T15:48:20Z")
After update Version 1.0.29 SR-ZG9023A(EU) HK-LN-SOCKET-A by Sunricher (4 socket 2 usb) stopped working i Homey PRO 2023, and it looks like its no longer supported ? Will it come to work again…?? Regards J.K.Pedersen ---
**Author:** ![Daniel\_Karlsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniel_karlsen/32/70866_2.png) [@Daniel\_Karlsen](https://community.homey.app/u/Daniel_Karlsen)\ **Post date:** [November 10, 2023, 3:47pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/82 "2023-11-10T15:47:03Z")
Any update on this? @Easy_Home [Previous page](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588.md?page=3) [Next page](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588.md?page=5)